石英灯辐射加热条件下低密度碳/酚醛复合材料高温响应及分析

目的研究低密度碳/酚醛复合材料在不同地面加热实验测试响应的差异性,指导材料在实际应用环境下的高温响应分析。方法对低密度碳/酚醛复合材料开展了热流为400 kW/m~2的单侧石英灯辐射加热实验,利用热电偶测温系统测量试件在加热过程中不同位置的温度时间历程,并对试件的烧蚀形貌和微观结构进行观测。同时与热流为464k W/m~2的氧乙炔加热陶瓷板辐射加热实验结果进行对比分析,并且采用有限元方法对材料的传热传质多场耦合计算进行分析。结果对于石英灯辐射加热,在测量点升温到接近200℃时,温度响应拐点都依次出现。由于加热的辐射热源不同,在不同的辐射波段下,多孔材料吸收和发射的热量不同,短时间内氧乙炔加热陶瓷板辐射加热使材料内部升温速率比石英灯辐射加热实验的要快,但长时间加热时现象刚好相反。结论进行传热传质多场耦合计算材料高温响应时,合理确定材料宏观性能随温度的变化至关重要。     

基于短时傅里叶变换的干扰信号识别方法

目的提高无线电引信识别欺骗式干扰的能力。方法根据炮弹弹体自旋的特点,使得采用连续波线极化天线的无线电引信所收到的干扰信号呈现出有别于地面回波的周期性幅度调制特征,通过对此特征进行短时傅里叶变换后进行识别,可以作为无线电引信是否受到欺骗式干扰的判断依据。结果通过仿真和试验对方法的可行性进行了验证,表明该识别方法可以很好地提高连续波无线电引信的识别欺骗式干扰的能力。结论基于短时傅里叶变换检测旋转调制的对地旋转弹无线电引信欺骗干扰识别的方法可以对干扰信号特征进行识别,算法处理时间短,能够作为引信是否受到干扰的一种判断依据。     

高温条件下高速碰撞试验技术研究

目的建立高温条件下结构的高速碰撞试验技术。方法基于理论和试验方法,研究影响试样加热/保温、碰靶速度和姿态的关键因素,利用次口径发射技术和电炉技术实现试样的加热、保温和加速。采用间接方法测试试样碰靶时的温度,联合应用次口径发射技术和靶体,控制试样的碰靶姿态,并利用高速摄影技术对其进行测试。通过薄壁圆柱筒的高温高速碰靶验证高温试验技术的有效性。结果建立了加热、加速和姿态控制一体化的高温高速碰撞试验技术,获得了不同尺寸薄壁圆柱筒不同姿态碰靶时的高温冲击动力学响应。正碰时,撞击端镦粗,尾端收缩,尾端的凹陷大于碰撞端的变形;侧碰时,圆筒呈马鞍状;角碰时的变形为楔形。随着圆筒的强度和刚度的降低,圆筒的变形增加,整体发生坍塌,出现大量的皱褶。结论建立的试验技术切实有效,可以用于高温条件下结构高速碰撞效应的研究。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

Laboratory and Field Assessment of Arsenic Testing Field Kits in Bangladesh and West Bengal, India

High concentrations of arsenic in ground waters in West Bengal and Bangladeshhave become a major cause for concern in recent years. Given the enormity and the severity of the problemof arsenic poisoning, a task of evaluating the commercially available arsenic detection field kits for their capabilities was undertaken. In the light of the findings, generic specificationswere recommended which could form the basis forindigenous manufacture of these kits in the arsenic affected countries. This article presents the results of the laboratory and fieldevaluation conducted in Bangladesh and West Bengalof five arsenic testing field kits. The salient features of the kits, their merits and limitationshave been brought out. Based on the criteria of kitdesign, quality of chemicals used, colourcomparator charts, detection range, time required for analysis, cost etc., a comparative ranking ofthe kits has been made to facilitate the choice of the kit to meet specific requirements.     

The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

A study on the orbit of air temperature movement

In this paper, we describe an air temperature movement by mapping its time series to the polar coordinates: the value of the time series is plotted on the radial coordinate and the time on the angular coordinate. In this way, both the yearly and daily air temperature movements from five different locations of China are used to demonstrate that, in an intuitionistic view, air temperature movement is neither random nor chaotic, but has its own orbit. We then propose an elliptic orbit model for the air temperature movement. Our proposed model provides quite good results when it is applied to the evaluation of yearly air temperature movements in eight locations in various parts of the world, and the evaluation of daily air temperature movements in five locations in Hunan Province of China on December 17, 2005. Results show that our approach provides a concise and helpful model for air temperature analysis.     

Atrazine and Alachlor Inputs to Surface and Ground Waters in Irrigated Corn Cultivation Areas of Castilla-Leon Region, Spain

The inputs of atrazine and alachlor herbicides to surface and ground waters from irrigated areas dedicated to corn cultivation in the Castilla-León (C-L) region (Spain) as related to the application of both herbicides were studied. Enzyme-linked immunosorbent assays (ELISA) were used for monitoring the atrazine and alachlor concentrations in 98 water samples taken from these areas. Seventy-nine of the samples were of ground waters and 19 were of surface waters. The concentration ranges of the herbicides detected in the study period (October 1997–October 1998) were 0.04–25.3 g L^–1 in the surface waters and 0.04–3.45 g L^–1 in the ground waters for atrazine, and 0.06–31.9 g L^–1 in the surface waters and 0.05–4.85 g L^–1 in the ground waters in the case of alachlor. The highly significant correlation observed between the concentrations of both herbicides in the surface waters (r = 0.89, p < 0.001) pointed to a parallel transport of atrazine and alachlor to these waters. A study was made of the temporal evolution of the concentrations of both herbicides, and it was found a maximum recharge of atrazine in the ground waters for April 1998 and of alachlor in October 1997 and October 1998. The temporal evolution of the concentrations of both herbicides in surface waters was parallel. The highly significant correlations observed between atrazine concentrations determined by ELISA and by HPLC (r = 0.92, p < 0.001) and between alachlor concentrations also determined by both methods (r = 0.96, p < 0.001) confirmed the usefulness of ELISA for monitoring both herbicides in an elevated number of samples. Using HPLC, the presence in some waters of the alachlor ethanesulfonate (ESA) metabolite was found at a concentration range of 0.52–4.01 g L^–1. However the interference of ESA in the determination of alachlor by ELISA was negligible. The inputs of atrazine and alachlor to waters found in this study, especially the inputs to ground waters, could pose a risk for human health considering that some waters, though sporadically, are even used for human consumption.     

唐钢2×150t转炉煤气回收系统设计及运行实践

在此较详细地介绍了唐钢一炼钢厂 2× 15 0t转炉煤气回收湿法除尘工艺和系统的技术特点。该系统设计吸收了国内外大型转炉煤气回收的经验。经近 18个月的生产实践 ;认为效果良好 ,煤气回收率近 80 % ,热值近 80 0 0kJ Nm3,放散排放浓度小于 80mg m     

Dynamic fate modeling of γ-hexachlorocyclohexane in the lower reaches of the Liao River

A QWASI model dependent on temperature is parameterized to describe the long-term fate of persistent organic pollutants (POPs) in the Liao River. The model parameters, namely fugacity capacity, degradation rate, and transfer coefficient, are profoundly affected by temperature. This model is used to simulate the fate of γ-hexachlorocyclohexane (γ-HCH) in the lower reaches of the Liao River from 1998 to 2008. Modeling results show that γ-HCH fugacity capacities in air, water, and sediment increase as temperature decreases, and the transfer and transformation rate coefficients increase as temperature increases. The variations of transfer and transformation parameter D values depend on fugacity capacities, and transfer and transformation coefficients simultaneously. The performance of the model is evaluated by comparing the predicted and observed concentrations in the water and sediment of the Liao River. The predicted values agree well with the observed value in the order of magnitude, in most cases within the factor of 3. It is believed that the model is appropriate for simulating the long term fate of POPs in the Liao River. Translated from Environmental Science, 2006, 27(1): 121–125 [译自: 环境科学]