Effects of ladder parameters on asymmetric patterns of force exertion during below-knee amputees climbing ladders

Different from walking, ladder climbing requires four-limb coordination and more energy exertion for below-knee amputees (BKAs). We hypothesized that functional deficiency of a disabled limb shall be compensated by the other three intact limbs, showing an asymmetry pattern among limbs. Hand and foot forces of six below-knee amputees and six able-bodied people were collected. Hand, foot and hand/foot sum force variances between groups (non-BKA, intact side and prosthetic side) were carefully examined. Our hypothesis was validated that there is asymmetry between prosthetic and intact side. Results further showed that the ipsilateral hand of the prosthetic leg is stronger than the hand on the intact side, compensating weakness of the prosthetic leg. Effects of ladder rung separations and ladder slant on asymmetric force distribution of BKAs were evaluated, indicating that rung separation has a more significant interactive effect on hand/foot force of BKAs than ladder slant.     

印铁涂装烘房有机废气的直接燃烧法处理实践

本文通过采用催化法和直燃法两种工艺处理印铁涂装生产的有机废气的工业实践,对设计和运行中的一些要点进行分析和探讨。     

混凝沉淀-二氧化氯氧化法处理印染废水

介绍了混凝沉淀－ＣｌＯ２氧化法处理印染废水的反应机理,工艺流程,处理效果及经济效益分析。在２个工厂的实际应用表明,该法工艺简单,操作方便,投资少,效果好。     

导流电凝聚法脱除印染废水色度的研究

阐述了导流电聚法处理废水的基本原理。采用该法处理印染废水,通过试验确定了废水电解脱色的最佳工艺条件。处理后印染废水的色度,ｐＨ,ＣＯＤ均达到国家排放标准。该法操作简单,电耗低,产生废渣量少,无二次污染。     

改性木屑吸附剂对印染废水的脱色性能研究

本文介绍了以廉价易得的杨树木屑为原料，经环氧氯丙烷交联，制备的一种新的生物吸附剂，研究各种反应因素（氢氧化钠浓度、环氧氯丙烷用量、反应温度、木屑粒径等）对反应过程和吸附剂性能的影响，检验了其对品红及孔雀石绿在不同条件下的吸附性能，并探讨了它的吸附动力学曲线和再生性能。     

臭氧氧化印染工业园废水的效能与机理研究

本研究开展了印染废水臭氧氧化影响因素、降解动力学和淬灭实验,测定了自由基物种、降解产物和琥珀酸脱氢酶活性.结果表明,苯胺去除效率随着pH值、臭氧投加量和臭氧投加速率的增加分别逐渐减小、增加和减小,且臭氧浓度为24 mg·L^-1时苯胺去除效率最高.臭氧氧化苯胺的适宜条件为：臭氧浓度为24 mg·L^-1、臭氧投加量为200 mg·L^-1和臭氧投加速率为4 mg·min^-1,此时苯胺的去除效率为47.2%.臭氧氧化苯胺是直接氧化为主结合羟基自由基反应的作用过程.苯胺脱氨基和裂解苯环后生成戊二酸或L-焦谷氨酸直至矿化.大肠杆菌在原水和臭氧氧化后废水中的酶抑制率分别为83.4%和24.7%.臭氧氧化前处理后,混凝去除色度、SS、COD、总氮、总磷、硫化物和苯胺的效能分别提高了0.72%、0.46%、31.40%、9.40%、22.80%、31.40%和63.30%.研究结果为臭氧氧化印染工业园废水前处理的应用提供了基础依据.     

β-PbO2和BDD电极处理印染反渗透浓水性能

系统比较了β-PbO₂/Ti-Ti和BDD/Si-Ti两种电极体系处理实际印染行业反渗透浓水(ROC)的性能,考察了同步去除化学需氧量(COD)和总氮(TN)的动力学,以及对废水可生化性的改善情况.结果表明,BDD/Si-Ti电极体系的析氧电位(2.45V)和析氯电位(1.90V),以及阳极氧化电位和阴极还原电位的绝对值均高于β-PbO₂/Ti-Ti电极体系;两种电极体系对COD以及TN的去除符合拟一级动力学,其中BDD/Si-Ti电极体系对COD去除的表观速率常数和能量利用效率均优于β-PbO₂/Ti-Ti电极体系;而β-PbO₂/Ti-Ti电极体系对TN去除的表观速率常数和能量利用效率更优.β-PbO₂/Ti-Ti电极体系在5mA/cm²的电流密度下电解15min,可使反渗透浓水BOD/COD从0.18升至0.42(提高1.33倍),而BDD/Si-Ti电极体系仅提升0.78倍.两者相比,BDD/Si-Ti电极体系适用于矿化污染物,β-PbO₂/Ti-Ti电极体系适用于改善废水可生化性.     

纤维素降解真菌的分离鉴定及特性研究

经过实验分离到一株纤维素降解真菌CD-Q1,通过形态及分子生物学鉴定该真菌为匍匐根霉。该菌能够以滤纸、秸秆和脱酯棉为唯一碳源生长,8 d内可将26.5%的秸秆降解,可将7.5%的滤纸糖化。当以滤纸为唯一碳源时,pH=5条件下,滤纸失重及还原糖产生量最高,45 h内可将3%滤纸降解,生成0.845 mg/ml的还原糖(以葡萄糖计)。该纤维素降解真菌的分离为纤维素糖化及进一步利用提供了较好菌源,为纤维素降解性能的基因改良提供了理想的出发菌株。     

RELATIONSHIP OF NITRATE CONCENTRATIONS TO DISTANCE OF WELL SCREEN OPENINGS BELOW CASING WATER LEVELS1

ABSTRACT: Data from 54 well in central and eastern Kansas developed in unconsolidated deposits of Quaternary age indicate that nitrate concentrations are inversely related to the depth of the well screen opening below the water level in the well casing because this relationship was found to exist in an area of Nebraska and in a large area of Kansas, the relationship is generally valid over a wide geo- graphical area. In addition, the data indicate that the incidence of nitrate concentrations exceeding 45 milligrams per liter and nitrate concentrations, in general, are significantly lower in water from wells with screens deeper than 25 feet below the water table in unconfined aquifers or where screens are placed in deep confined aquifers. No concentrations of nitrate greater than 45 milligrams per liter were in obseved wells where screens were deeper than 60 feet below the casing water level. These findings suggest that general placement of well screens as far below the water table as possible in unconfined unconsolidated aquifers in Kansas. and possibly other areas of the Midwest, may be an effective measure in preventing undesirable nitrate concentrations in ground water supplies. particularly in areas where nitrate is a problem.