燃煤电厂锅炉PM2.5排放危害度评价模型建立及案例分析

为评价燃煤电厂锅炉PM2.5排放的危害度,根据颗粒的形成机制及对环境和人体健康的影响程度,将PM2.5进行了粒径分段,综合考虑不同粒径段颗粒物的质量浓度、粒数浓度、汞相对富集因子及汞元素在煤灰分中含量,建立了燃煤锅炉PM2.5排放危害度综合评价模型,最后利用已有文献现场实验测得的数据对评价模型进行了案例分析,并提出了危害度削减系数概念,可用于对除尘装置进行评价.     

室内环境污染危害及防治

介绍了我国室内环境污染问题的现状和室内环境中的主要污染物及其来源, 分析了室内环境污染对人体健康的危害,提出了针对室内环境污染的防治措施.     

有机酸性腐蚀品生产危险性分析

目前我国化工生产中涉及大量有机酸性腐蚀品,通过对某市化工行业调查及分析,发现有机酸性腐蚀品生产普遍,而且生产原料易燃易爆,生产过程存在火灾爆炸危险,结合具体生产工艺,采用预先危险性分析法和作业条件的危险性评价法分析生产过程危险性,从而揭示并概括有机酸性腐蚀品生产危险性.为更好地促进我国安全生产,在此基础上探讨了一些针对性的安全措施.     

火源位置对L型管廊电缆火灾影响规律的数值模拟研究

选取某城市L型综合管廊电缆舱为研究对象,采用FDS数值模拟软件研究了不同火源位置对L型管廊电缆火灾温度纵向衰减规律、烟气浓度分布规律及烟气危害性的影响。研究结果表明,L型廊道构型影响了不同火源位置的管廊电缆火灾最高温度纵向衰减的连续性,基于热边界层理论提出了适用于L型管廊的二维平面最高温度纵向衰减模型。基于峰宽时间计算了L型管廊火灾的烟气总危害性参数,不同火源位置的烟气危害性总在靠近管廊节点位置处最低。这些结果可对综合管廊的消防设计与火灾防控提供参考。     

226Ra, 232Th and 40K analysis in soil samples from some areas of Malwa region, Punjab, India using gamma ray spectrometry

The activity concentrations of soil samples collected from thirty different locations of Malwa region of Punjab were determined by using HPGe detector based on high-resolution gamma spectrometry system. The range of activity concentrations of ²²⁶Ra, ²³²Th and ⁴⁰K in the soil from the studied areas varies from 18.37 Bq kg⁻¹ (Sangrur) to 53.11 Bq kg⁻¹ (Sitoguno), 57.28 Bq kg⁻¹ (Dhanola) to 148.28 Bq kg⁻¹ (Sitoguno) and 211.13 Bq kg⁻¹ (Sunam) to 413.27 Bq kg⁻¹ (Virk Khera) with overall mean values of 35 Bq kg⁻¹, 80 Bq kg⁻¹and 317 Bq kg⁻¹ respectively. The absorbed dose rate calculated from activity concentration of ²²⁶Ra, ²³²Th and ⁴⁰K ranges between 8.47 and 24.48, 35.68 and 92.38, and 8.74 and 17.11 nGy h⁻¹, respectively. The total absorbed dose in the study area ranges from 58.08 nGy h⁻¹ to 130.85 nGy h⁻¹ with an average value of 79.11 nGy h⁻¹. The calculated values of external hazard index (H_ex) for the soil samples of the study area range from 0.35 to 0.79. Since these values are lower than unity, therefore, according to the Radiation Protection 112 (European Commission. Radiation Protection 112 1999) report, soil from these regions is safe and can be used as a construction material without posing any significant radiological threat to population.     

Framing of Geoengineering Affects Support for Climate Change Mitigation

The growing recognition that climate change mitigation alone will be inadequate has led scientists and policymakers to discuss climate geoengineering. An experiment with a US sample found, contrary to previous research, that reading about geoengineering did not reduce conservatives’ skepticism about the existence of anthropogenic climate change. Moreover, depending on how it is framed, geoengineering can reduce support for mitigation among both conservatives and non-conservatives. When geoengineering is framed as a major solution, people worry less about climate change, leading to reduced mitigation support. When framed as disastrous, people perceived geoengineering as riskier, also leading to a decrease in mitigation support. A more moderate framing of geoengineering as a partial solution is less susceptible to moral hazard effects. Overall, results suggest that geoengineering will not lessen political polarization over anthropogenic climate change, and could undercut support for mitigation efforts. Instead, framing geoengineering as a small piece to solving a big puzzle seems to be the best strategy to weaken this potential moral hazard.     

江苏省及南京市工业危险废物现状研究与分析

通过对全国、江苏省以及南京市工业危险废物的产生量和排放量进行调查、总结和对比分析,指出江苏省作为一个工业大省、强省,每年工业危险废物的产生量接近全国的10%,且呈逐年下降趋势.而排放量所占比例大于10%,且出现了先降低、再增加、又降低到零的现象,最高时达到16.67%.造成这一现象的原因可能跟工业危险废物的管理有关.同时指出了目前江苏省乃至南京市目前存在的问题以及相应的对策措施.     

氯气泄漏扩散半径估算与应急处置

氯气泄漏是常见的化学事故之一.通过对氯气的理化性质、危险特性和泄漏原因分析,估算氯气泄漏的扩散半径,同时以扩散半径作参考,提出氯气泄漏的应急处置措施,为氯气泄漏事故应急处理提供技术支持.     

安全风险分级防控在油气开发领域的探索与应用

为推动油气开发领域安全风险分级防控有效落地,提高风险预控能力,本文基于风险防控现状评估结果,探索性地研究安全风险分级防控思路,构建了油气开发领域安全风险分级防控体系推进模型,提出了逆向与正向危害因素识别方法,明确了风险评价关键隐性过程原则,构建了风险-后果-能资分级防控决断模型。选取典型试点单位进行实践,结果证明,油气开发领域安全风险分级防控体系推进模型是科学合理的,其他领域也可借鉴该模型开展安全风险分级防控工作。     

环境中的微塑料:赋存、检测及其危害

近年来,由个人护理品及废旧塑料直接或间接产生的微塑料不断地在各种环境介质中被检出,且微塑料会对生态系统产生各种危害,因此对微塑料的研究受到越来越广泛的关注。阐述了微塑料在水体、沉积物、沙滩和生物体中的赋存情况,介绍了微塑料的采集与分离方法,以及定性与定量分析方法。指出微塑料对环境及生物体产生的危害,提出现阶段研究存在的主要问题,并对今后的研究方向进行了展望。