工业和建筑固体废弃物再生研究

为了减轻我国的工业/建筑固体废弃物的污染压力,通过对工业和建筑固体废物、粉煤灰、水泥以及外加剂的组合配比实验,优化制作具有轻质高性能的混凝土建筑砌块的方法,并对所研制的混凝土砌块的强度和导热性能进行了测试,最终结果显示砌块性能良好。预计此类复合建筑材料可以在未来的市政建筑中发挥应有的作用。     

大豆蛋白粉喷雾干燥塔尾气余热的回收与利用

针对大豆蛋白粉生产过程中喷雾干燥塔尾气温度较高,有回收利用价值的现实,也针对目前的节能需求,对现有的喷雾干燥塔的尾气排放部分进行改造,设计一个片状空气预热器,以利用高温的尾气与系统的进气做热交换,实现热量再利用,降耗和提高蛋白粉产率的目的,并对投资收益进行了分析。     

降低湿法脱硫系统GGH差压的方法与实践

针对台州发电厂脱硫系统在投运初期出现GGH差压高现象,首先简要介绍了湿法脱硫系统的GGH工作原理,结合脱硫系统的运行经验和相关试验进行原因分析和探索归纳得出降低GGH差压的几种方法和对策,并论证了对策实施后的效果,使脱硫系统运行达到最佳的经济性和稳定性。这些控制方法和参数对脱硫系统的正常运行,保证SO2浓度的达标排放将起到积极的作用,可为火电厂湿法脱硫系统高效运行提供理论基础和实践依据。     

Environmental and economic assessment of a greenhouse waste heat exchange

As the economic costs of energy and the negative externalities associated with the combustion of fossil fuels threaten the economic viability of greenhouses in northern climates there is a renewed interest in the use of waste heat. This paper presents a technical and economic methodology to determine the viability of establishing waste heat greenhouses using the waste heat from industrial processes in northern climates. A case study is presented of an exchange between a tomato greenhouse and a flat glass manufacturing plant, which found the waste heat system is significantly more economic to operate than a purely natural gas system.     

Experimental thermal storage research of organic binary phase change materials in building environment

This paper aims to reveal the heat transfer mechanism of low-temperature phase change material (PCM) and design PCM heat storage device in building heating environment. Firstly, low-temperature binary PCMs of lauric acid and stearic acid are prepared, and their thermal properties are investigated by DSC. Then, shell and tube latent heat thermal energy storage units are conducted, and heat transfer experiments are carried out to analyze the heat transfer mechanism of PCM. The results demonstrate that natural convection plays an important role in heat transfer process, and the heat storage efficiency of PCMs can be significantly enhanced by increasing the fin width and improving the inlet heat transfer fluid (HTF) temperature. Furthermore, some proposals are put forward to guide the design of PCM storage device in building heating environment.     

Study of the performance of a coolant mixed with an Al2O3/SiC nanomaterial in an engine radiator

One of the important components of a car to control the temperature of a car's engine is the radiator. To increase the heat absorption capacity of the coolant/fluid used in the radiator with minimum pumping power, innovative fluids called nanofluids have become the main area of research these days. Therefore, with the development of new technologies in the field of “nano-materials” and “nano-fluids,” the physical and chemical properties of coolant/fluid can be improved which in turn improves the radiator and engine efficiency, and reduces radiator weight and size. In this article, the heat transfer by forced convection in nanofluids based on Al₂O₃ and SiC was studied experimentally and compared to that of base fluid in an automotive radiator. The nanofluid is mixed with ethylene glycol and the fluid is prepared by the sonication method. The nanofluids were prepared by varying the nanomaterials and the amounts of nanomaterials in the base fluid and their heat transfer performance in the radiator was analyzed using ANSYS FLUENT software. Approximately 15% and 12% increase in radiator efficiency by using Al₂O₃ mixed nanofluid and SiC mixed nanofluid, respectively.     

自然通风排热量的近似计算法

采用“假设密闭绝热空间法”,计算工业厂房的自然通风排热量。实践证明,此方法是可行的。     

试论ISO11014-1应增设有关理化参数

提出了在执行国际标准ＩＳＯ１１０１４－ １ 即化学品安全技术说明书的数据模式中应增设可燃液体的燃烧速率、比热和蒸发潜热等理化参数,并阐述了增设的必要性、作用、对策及建议。     

燃煤电站SCR烟气脱硝还原剂尿素热解热源的选择

介绍了燃煤电站SCR尿素热解工艺,结合当前燃料价格,通过工程案例计算,对比了各种尿素热解热源的运行费用。计算结果表明,高温蒸汽加热方案的运行费用最省,但在实际应用中受到相关条件的限制;在一定条件下,燃气加热与电加热方案是工程的优选技术方案。     

大型仓库防火分区问题性能化设计研究

本文运用性能化设计方法对某大型仓库防火分区问题进行分析说明,其结果勿需对空间进行实体分隔,从而实现动态分区。为了实现了动态分区,通过采用合理的消防对策和减少火灾时热释放速率的方法,防止火灾扩散和蔓延。本文运用ISO9705实验装置研究了该仓库内主要可燃物(轮胎)在不同堆放方式下的热释放速率,通过确定可燃物堆放方式来减少该仓库的热释放速率,由于研究结果表明了可燃物水平堆放比垂直堆放的热释放速率小得多,从而可燃物应水平堆放;同时本文也对采用标准喷头和快速响应早期抑制喷头的自动喷水灭火系统分别进行了科学计算,比较二者的结果所得：标准喷头不能实现对着火源的控制,而快速响应早期抑制喷头可以对着火源的控制,该仓库的自动喷水灭火系统采用快速响应早期抑制喷头可以将火势控制在一定的范围内,火源上方(z=6．8m)温度分布也表明该仓库不需要进行钢结构保护。