复合填料热传导过程数值模拟

复合填料由废铸砂、粉煤灰、聚苯乙烯(EPS)颗粒、水泥和水按一定质量比例混合制成,具有低导热性、抗冻胀和轻质特性。根据热阻力法则和比等效导热系数相等法则,将材料视为由大量正方形单元体组成,其中心为一个球形EPS颗粒,这种单元体与总体的导热系数相等。运用AN SY S软件对复合填料单元体的传热过程进行了有限元模拟,根据瞬态法导热系数测试原理,推求不同EPS掺入比情况下的复合填料导热系数,分析EPS颗粒与导热系数的关系,发现材料导热系数随着EPS掺入比的增加而快速降低。将材料导热系数数值模拟与实测结果作比较,发现有限元模拟值与实测值接近,说明采用有限元方法可以实现对材料传热过程的模拟。     

Streambank Soil and Phosphorus Losses Under Different Riparian Land‐Uses in Iowa1

Abstract: Phosphorus and sediment are major nonpoint source pollutants that degrade water quality. Streambank erosion can contribute a significant percentage of the phosphorus and sediment load in streams. Riparian land‐uses can heavily influence streambank erosion. The objective of this study was to compare streambank erosion along reaches of row‐cropped fields, continuous, rotational and intensive rotational grazed pastures, pastures where cattle were fenced out of the stream, grass filters and riparian forest buffers, in three physiographic regions of Iowa. Streambank erosion was measured by surveying the extent of severely eroding banks within each riparian land‐use reach and randomly establishing pin plots on subsets of those eroding banks. Based on these measurements, streambank erosion rate, erosion activity, maximum pin plot erosion rate, percentage of streambank length with severely eroding banks, and soil and phosphorus losses per unit length of stream reach were compared among the riparian land‐uses. Riparian forest buffers had the lowest streambank erosion rate (15‐46 mm/year) and contributed the least soil (5‐18 tonne/km/year) and phosphorus (2‐6 kg/km/year) to stream channels. Riparian forest buffers were followed by grass filters (erosion rates 41‐106 mm/year, soil losses 22‐47 tonne/km/year, phosphorus losses 9‐14 kg/km/year) and pastures where cattle were fenced out of the stream (erosion rates 22‐58 mm/year, soil losses 6‐61 tonne/km/year, phosphorus losses 3‐34 kg/km/year). The streambank erosion rates for the continuous, rotational, and intensive rotational pastures were 101‐171, 104‐122, and 94‐170 mm/year, respectively. The soil losses for the continuous, rotational, and intensive rotational pastures were 197‐264, 94‐266, and 124‐153 tonne/km/year, respectively, while the phosphorus losses were 71‐123, 37‐122, and 66 kg/km/year, respectively. The only significant differences for these pasture practices were found among the percentage of severely eroding bank lengths with intensive rotational grazed pastures having the least compared to the continuous and rotational grazed pastures. Row‐cropped fields had the highest streambank erosion rates (239 mm/year) and soil losses (304 tonne/km/year) and very high phosphorus losses (108 kg/km/year).     

Method to Partition Between Attached and Unattached E. coli in Runoff From Agricultural Lands1

Abstract: Remediation of waters impaired by bacterial indicators is usually dictated by total maximum daily load plans, which are heavily dependent on fate and transport modeling of bacterial indicators. Nonpoint source pollution models are most frequently used to assess bacterial transport to surface waters and most models typically simulate bacterial transport as a dissolved pollutant. Previous studies have found that cells preferentially attach to sediments; however, a variety of techniques have been used to assess attachment including filtration, fractional filtration, and centrifugation. In addition, a variety of chemical and physical dispersion techniques are used to release attached and bioflocculated cells from particulates. Here we developed and validated an easy‐to‐replicate laboratory procedure for separation of unattached from attached E. coli which will also identify particle sizes to which E. coli preferentially attach. Physical and chemical dispersion techniques were evaluated and a combined hand shaker treatment for 10 min followed by dilutions in 1,000 mg/l of Tween 85 significantly increased total E. coli concentrations by 31% when compared with a control. In order to separate unattached from attached fractions, two commonly used techniques, fractional filtration, and centrifugation were combined. The filtration and centrifugation treatments did not reduce E. coli concentrations when compared with a control (p > 0.05), indicating that damage was not inflicted upon the E. coli cells during the separation procedure.     

Field monitoring of volatile organic compounds using passive air samplers in an industrial city in Japan

Highly portable, sensitive, and selective passive air samplers were used to investigate ambient volatile organic compound (VOC) levels at multiple sampling sites in an industrial city, Fuji, Japan. We determined the spatial distributions of 27 species of VOCs in three campaigns: Mar (cold season), May (warm season), and Nov (mild season) of 2004. In all campaigns, toluene (geometric mean concentration, 14.0microg/m3) was the most abundant VOC, followed by acetaldehyde (4.76microg/m3), and formaldehyde (2.58microg/m3). The spatial distributions for certain VOCs showed characteristic patterns: high concentrations of benzene and formaldehyde were typically found along major roads, whereas high concentrations of toluene and tetrachloroethylene (PCE) were usually found near factories. The spatial distribution of PCE observed was extremely consistent with the diffusion pattern calculated from Pollutant Release and Transfer Register data and meteorological data, indicated that passive air samplers are useful for determining the sources and distributions of ambient VOCs.     

不锈钢板式热沉传热特性的实验与模拟研究

目的 研究流量、胀高及焊点排布方式对不锈钢板式热沉传热特性的影响。方法 搭建实验平台,加工出结构参数不同的板式热沉实验件,同时采用静力隐式算法建立相应的几何模型,通过实验与数值模拟相结合的方法,研究流量、胀高和焊点排布方式的变化对板式热沉热阻的影响规律,并分析热沉流道内部流场状态。结果 首先计算了6个工况下的热阻,发现实际换热量为540 W时,数值模拟与实验结果的最大相对误差不大于25%。然后分析了误差来源,最后得到了热沉全流道速度场与温度场的分布情况。结论 实验与模拟结果有较好的符合程度,证明了数值模拟方法的可靠性。在换热量相同时,板式热沉的热阻随流量与胀高的增大而减小,焊点为菱形排布的热沉传热性能相对更好。板式热沉内部的流场具有周期性,焊点使流体扰动增强,并形成射流和旋涡,起到了强化传热的效果。     

宁东能源化工基地核心区表层土壤酚类污染物的污染评价、空间分布及来源解析

采集了宁东能源化工基地核心区的146个表层土壤样品,检测了6种优控酚类污染物.运用单因子污染指数、内梅罗综合污染指数和致癌风险指数评价了酚类污染物的污染程度及健康风险.借助主成分分析和绝对主成分分数-多元线性回归受体模型,结合地统计学方法,对酚类污染物的空间分布及来源进行了分析.结果显示:2,4-二氯酚和2,4,6-三...     

燃煤电站SCR烟气脱硝还原剂尿素热解热源的选择

介绍了燃煤电站SCR尿素热解工艺,结合当前燃料价格,通过工程案例计算,对比了各种尿素热解热源的运行费用。计算结果表明,高温蒸汽加热方案的运行费用最省,但在实际应用中受到相关条件的限制;在一定条件下,燃气加热与电加热方案是工程的优选技术方案。     

青岛市挥发性有机物排放清单及重点行业排放特征研究

根据收集的青岛市九大类排放源的活动水平数据,本研究采用排放因子法结合调研实测等工作建立了青岛市VOCs源排放清单,结果表明,工业企业VOCs排放占总排放的比例达到43.17%。其中,工艺过程源类中排放占比较高的行业依次为橡胶和塑料制品业、非金属矿物制品业、原油加工及石油制品制造业、化学原料和化学制品制造业、黑色金属冶炼和压延加工业等;溶剂使用源类中排放占比较高的行业为金属制品业、皮革皮毛羽毛制品和制鞋业、印刷业、铁路船舶航空等设备制造业、汽车制造业等。通过对重点行业重点企业进行入场调研采样分析,本研究发现不同行业中VOCs组成特征有差异,多数行业VOCs物种排放以卤代烃、芳香烃、烷烃等为主,纺织印染业、制鞋业等部分行业以含氧有机物排放为主。通过调研和实测对部分行业的VOCs排放因子水平做了本地化深入研究,调研统计青岛市约49%的企业安装了VOCs治理设施;在企业所安装的VOCs治理设施中吸附法占比最大,占比为26%。     

卢氏县集中式饮用水水源保护区划分研究

划分水源地保护区是保障饮用水资源可持续利用的重要措施。在卢氏县集中式饮用水水源保护区的划分工作中,根据《饮用水水源保护区划分技术规范》(HJ/T338-2007),采用现场调研和卫星遥感技术相结合的方法,结合饮用水水源保护区的地形、地标、地物的特点,科学地对卢氏县地下水型、河流型、湖泊型水源地进行保护区划分,并提出卢氏县饮用水水源保护区范围、面积及目标,为卢氏县饮用水源保护规划奠定了理论基础。针对卢氏县饮用水源的特点,提出可行的建议和措施,为下一步饮用水源的保护提供科学依据。     

水上溢油环境风险源确定研究

依据泄漏进水域的最大油品量、水域环境敏感性等两个主要因素,研究确定了江苏油田水上(临水)设施环境风险源等级,并针对不同的风险源阐述了降低风险等级的技术方法和预防措施,为加强江苏油田环境风险防患、提高应急处理能力提供了依据。