用预先热处理的材料加工长杆高强度双头螺柱

用预先热处理的材料生产长杆高强度双头螺柱新工艺 ,消除了长杆的热处理变形 ,降低了机械性能的不稳定性 ,提高了产品质量及螺纹联接的可靠性。     

连江地热水排放对水体、土壤和农作物的影响研究

探讨了连江地热水利用排放对水体、土壤农作物、鱼类的影响，为今后保护环境和合理开发利用地热水提供科学依据。     

雾化合金液滴的凝固动力学分析与计算

雾化凝固过程对雾化制粉和喷射沉积材料的组织有重要影响。雾化凝固过程主要由液态冷却、再辉、偏析凝固、共晶凝固与固态凝固阶段组成。分析了雾化过程中的液滴的速度与粒度分布及凝固各阶段液滴凝固潜热的释放与环境导热之间的热平衡。     

水泥土桩复合地基桩土应力参数研究

本文首先通过理论分析，认为桩土应力比、桩土荷载分担比等是反映水泥土桩复合地基工作性状的重要参数。然后通过现场试验，研究桩土应力比、桩土荷载分担比随荷载变化的规律。结果认为：随着荷载增加，桩土应力比逐渐减小，当比值达到某一特征值后，不再发生明显变化；桩土应力比、桩土荷载分担比不为常数，其变化是桩土变形协调的结果。最后得出有一定参考价值的结论。     

氧化铝厂1100m2自然循环蒸发器制造技术

蒸发是氧化铝生产一道非常重要的工序，蒸发器为其主要设备，中国铝业集团河南分公司共有1100m^2自然循环蒸发器21台，均已进入大修更换周期，为了保证制造质量及投产后的安全运行，对蒸发器制造工艺相关技术进行探讨。     

锅炉房工艺设计中确定煤场面积的一种方法

本文以管理科学的库存理论为基础，以提高经济效益为目的，提出了一种全新的锅炉房煤场面积确定方法。     

Annual and Diurnal Wind Patterns in the City of São Paulo

The major topographic, mesoscale, and urban influences on the wind patterns of the City of São Paulo are characterized using one year of surface wind velocity data observed at 11 surface stations within its urban limits. The data was used to study the diurnal and annual variations of wind velocity and horizontal wind divergence within the city. Results showed that the circulation over the investigated area is dominated by three major factors: sea breeze; mountain-valley circulations; and urban effects, such as roughness, building-barrier, and urban heat island. The sea breeze was found to be the dominant feature of the monthly-averaged diurnal variation of São Paulo surface winds during the eight warmest months of the year. The sea breeze front induces a velocity minimum at the time of its passage and a post-frontal afternoon velocity maximum. Mountain-valley thermal effects on the flow can be seen in the temporal divergence/convergence patterns. These thermal effects tend to be more important during colder months, at night, and when the wind velocities are low. Nighttime downslope convergent flows are present over the city during winter and spring and daytime upslope divergent flows are present over the city during summer months.     

中国科学技术协会五届二次全委会明年在京召开我会两名代表参加全会活动

中国科学技术协会五届二次全委会明年在京召开我会两名代表参加全会活动中国科协第五届全国委员会第二次会议将于１９９７年２月２２日至２４日在北京召开。我会副理事长、中国科协全国委员会委员程映雪教授作为正式代表，我会副秘书长、“中国安全科学学报”主编徐德蜀高...     

特大型煤和瓦斯突出的地质条件及其成因

特大型煤和瓦斯突出危害极大，具有独特的发生条件，应专门研究。在全国９９ 次特大型煤和瓦斯突出详细研究的基础上，总结了特大型突出的一般特征及发生的地质和采矿条件，并给出了南桐矿区的几个临界值。对特大型突出地质条件的成因进行了较深入的探讨，提出了防止特大型突出的几点建议     

On the thermal rupture of 1.9 m propane pressure vessels with defects in their thermal protection system

This paper describes the results from a series of fire tests that were carried out to measure the effect of defects in thermal protection systems on fire engulfed propane pressure vessels.

In North America thermal protection is used to protect dangerous goods rail tank-cars from accidental fire impingement. They are designed so that a tank-car will not rupture for 100 min in a defined engulfing fire, or 30 min in a defined torching fire. One common system includes a 13 mm blanket of high-temperature ceramic fibre thermal insulation covered with a 3 mm steel jacket. Recent inspections have shown that some tanks have significant defects in these thermal protection systems. This work was done to establish what levels of defect are acceptable from a safety standpoint.

The tests were conducted using 1890 l (500 US gallon) ASME code propane pressure vessels (commonly called tanks in the propane industry). The defects tested covered 8% and 15% of the tank surface. The tanks were 25% engulfed in a fire that simulated a hydrocarbon pool fire with an effective blackbody temperature of 870 °C.

The fire testing showed that even relatively small defects can result in tank rupture if the defect area is engulfed in a severe fire, and the defect area is not wetted by liquid from the inside. A wall failure prediction technique based on uniaxial high-temperature stress rupture test data has been developed and agrees well with the observed failure times.