重金属离子-二乙基二硫代氨基甲酸钠螯合体系的HPLC分析方法研究

采用二乙基二硫代氨基甲酸钠(NaDDC)为螯合剂,对Cu(Ⅱ)、Hg(Ⅱ)、Pb(Ⅱ)、Zn(Ⅱ)、Cd(Ⅱ)、Cr(Ⅵ)六种重金属离子进行了螯合萃取分离体系的方法研究,用HPLC方法建立了上述金属离子的最佳分离条件及定性定量分析方法.结果表明,用C18反相柱(5μm,150×4.6mmi.d.)和流动相(V(乙腈):V(甲醇):V(水)=55:15:30)能有效分离上述重金属离子,最低检测限在0.1～1.6ng范围内,线性范围及线性关系满足定量分析要求.     

气相色谱法测定废水中的茚及芳烃混合物

本文采用气相色谱法，选择中等极性的Ｔｒｉｃｒｅｓｙｌｐｈｏｓｐｈａｔｅ与高沸点的非极性ＡｐｉｅｚｏｎＬ配成混合固定液，测定工业废水中的茚及芳烃混合物。该方法灵敏度高，再现性好，简便快速，适合测定化工、制漆、制茚树脂生产所排放的废水，同时也能检出受苯系物及高沸点的不饱合物萘等多组分污染的水体     

石灰凝胶阻化剂防灭火技术在高硫矿的应用研究

在分析现有凝胶阻化剂防灭火机理的基础上 ,笔者针对我国高硫煤矿采空区发火特点 ,研制出石灰凝胶阻化剂的配方 ,并对其防灭火机理进行了详细探讨 ,确定了喷洒该种阻化剂的工艺过程及其应注意的问题。根据现场试验的测定数据表明 ,石灰凝胶阻化剂对高硫煤矿的防灭火效果好     

现代化工分离技术在环境保护中的应用

介绍了高效导向筛板、新型高效填料、超临界流体萃取等现代化工分离技术及其在清洁生产和废物处理方面的应用。     

稻米和土壤中农美利残留量气相色谱分析方法的研究

建立了测定稻田土壤、稻米中农美利残留量的气相色谱分析方法。用配有NPD的气相色谱仪、DB-1301毛细管柱测定稻田土壤及稻米中农美利的残留量，最低检测浓度为0．01mg／kg、平均回收率为80．4％-99．8％，变异系数为6．3％-11．7％，均达到残留分析的要求。     

磁分离技术在我国废水处理中的研究进展

本文介绍了磁分离技术的基本原理、分离方法和设备，综述了该技术在某些特定废水处理中的应用现状。磁分离技术的实际应用具有分离效率高、分离速度快、选择性好、处理对象广、成本低廉、分离物系的粒度可达到很小，并且不受处理体系的温度、密度、酸碱度限制等优点，可以使某些采用传统分离方法较难或不能分离的物系得以顺利地分离，有较为广泛的应用前景。     

五日生化需氧量(BOD5)测定方法探讨

本文针对GB／T7488-1987《水质五日生化需氧量(BOD5)稀释与接种法》中BOD5的测定和计算时接种稀释水的空白扣除方法，提出了直接测接种液的BOD5值，按接种液的比例在水样中进行扣除的方法，提高了BOD5值的准确性。更能反应BOD5的真实性。     

Assessment of the maximum possible liquid superheat during flashing leak flow

During the discharge of flashing liquids through leaks due to abrupt depressurization a transient thermodynamic non-equilibrium in the form of a boiling delay in the superheated liquid flow can occur. As a consequence the actual mass flow quality is smaller than calculated under the assumption of an immediate adjustment of the thermodynamic equilibrium between the phases. For the prediction of the leak mass flow for a given pressure difference the magnitude of this self-adjusting mass flow quality is needed.

Most of the models cited in the literature include only the equilibrium mass quality as limiting quantity and ignore further effects as that of the depressurization velocity or the mean nucleus distance. For the assessment of the maximum possible liquid superheat during flashing only the conduction heat transfer from a stagnant liquid to the bubble surface is used to describe the bubble growth.

The sub-model for the bubble growth due to expansion and mass transfer necessary for the global prediction of the transient thermodynamic non-equilibrium in flashing liquids was validated using bubble radii measured by Hooper et al. [Bubble growth and pressure relationship in the flashing of superheated water. Technical publication 6904, Mechanical Engineering Department, University of Toronto, 1969] for the case of a sudden depressurization of initially saturated water. On this basis the calculated time-dependent temperature field, the actual mass quality, the mean liquid temperature and, in comparison to the corresponding values based on the assumption of immediate thermodynamic equilibrium, the maximum possible liquid superheat are predicted.     

酒精废水消化液预处理试验研究

高浓度酒精糟液经厌氧生物处理后排出的消化液COD浓度为4500—6000mg/L，SS浓度高这1500—2．600mg,／L，且由于微小沼气泡附着在厌氧污泥上，沉降性能很差，难以与消化液相分离，对后续处理十分不剁。本研兜采用预曝气．化学混凝沉淀组合工艺，对该消化液进行去除高浓度SS的顸处理试验，研究探讨了曝气时间、混凝剂种类和投加量对SS和COD去除效果的影响。试验结果表明，预曝气．化学混凝沉淀组合工艺对消化液SS的去除效果十分显著。当预曝气时间为6．0h，FeCl3投加量为100mg/L时，消化液的SS去除率75．4％，COD去除率24．3％，可为后续的好氧生物处理提供较为有利的水质和负荷条件。     

On the response of 500 gal propane tanks to a 25% engulfing fire

This paper presents detailed data on the thermal response of two 500 gal ASME code propane tanks that were 25% engulfed in a hydrocarbon fire. These tests were done as part of an overall test programme to study thermal protection systems for propane-filled railway tank-cars.

The fire was generated using an array of 25 liquid propane-fuelled burners. This provided a luminous fire that engulfed 25% of the tank surface on one side. The intent of these tests was to model a severe partially engulfing fire situation.

The paper presents data on the tank wall and lading temperatures and tank internal pressure. In the first test the wind reduced the fire heating and resulted in a late failure of the tank at 46 min. This tank failed catastrophically with a powerful boiling liquid expanding vapour explosion (BLEVE). In the other test, the fire heating was very severe and steady and this tank failed very quickly in 8 min as a finite rupture with massive two-phase jet release. The reasons for these different outcomes are discussed. The different failures provide a range of realistic outcomes for the subject tank and fire condition.