云天化3#循环流化床锅炉项目技术经济分析

云天化股份公司在2004年建造了3#循环流化床锅炉，以煤代气。它可以缓解公司原料天然气的紧张状况，并能带来很大的经济效益。从技术经济的角度对该项目的技术先进性、可靠性及内部收益率、投资回收期、净现值等技术指标进行了分析。     

港口罢工对周边空气质量的影响

港口污染物的排放浓度极大地影响着周边的空气质量,以2013年3月28日香港国际集装箱码头发生的罢工事件为契机来探究港口运作短暂的瘫痪对周边空气质量的影响。首先,进行污染物之间的相关性分析确定影响本次罢工事件的污染物主要为NO_2、NO_x、SO_2以及O_3。其次,基于罢工前、罢工期间以及罢工后污染物排放的浓度变化,进行横向对比发现罢工期间的污染物确实有一定程度的减少。再次,利用纵向对比排除四季带来的影响探究不同年份同一阶段污染物浓度的变化情况评估罢工期间的空气质量。最后,以NO_2为例建立预测模型对罢工期间的NO_2浓度进行预测,根据实际值与预测值之间的差异来说明罢工影响了NO_2的预测趋势。这项研究主要强调港口空气质量对整个环境的影响,在一定程度上说明政府实施政策的有效性,为政府提供了决策支持,同时也要注重污染物之间的相互转化作用对环境的影响。     

75t/h燃煤锅炉汞迁移转化规律研究

通过对2台75 t/h循环流化床锅炉烟气中汞排放浓度、燃煤和其他固体副产物中的汞含量进行测试,分析了燃煤大气汞的排放因子,并建立了燃煤汞的质量平衡。结果表明:燃煤锅炉中,大部分汞主要存在于烟气和脱硫副产物中,燃烧后进入炉渣、飞灰中的汞含量较少,低于5%。燃煤汞排放去向与脱硫除尘控制技术有关,不同控制技术协同除汞的效果差异较大,而单质汞是燃煤锅炉汞污染防治的重点和难点。     

稀土磁盘水处理方案技术经济比较

文章针对日照钢铁集团公司2150热轧水处理工程浊环水处理方案选择,对传统沉淀过滤法和先进的稀土磁盘法进行了对比和分析,稀土磁盘法在效果、占地、投资和运行维护费用上有较多优势,最终选用该工艺。     

环境管理过程中对锅炉型号的识别

通过对锅炉型号的简要介绍,提高对锅炉的认识,增强在污染源动态更新调查表的填报过程中锅炉技术指标的填报能力是十分必要的。     

工业锅炉PM2.5产排特性试验研究

采用荷电低压颗粒撞击器(ELPI)对哈尔滨市两台燃用烟煤的工业锅炉PM2.5排放特性进行了研究.研究结果表明:PM2.5的粒数和质量浓度分布曲线均呈现单峰分布,前者峰值出现在0.12~0.2μm粒径范围内,这部分粒子主要是由无机物气化-凝结形成的亚微米颗粒物和挥发分未完全燃烧形成的炭黑粒子,而后者峰值出现在0.32μm处,粒子主要是由炭黑粒子形成的亚微米颗粒和残灰粒子形成的超微米颗粒.同时发现,旋风除尘和湿法除尘对PM2.5各级颗粒均有一定的去除效果,采用多管旋风和冲击水浴除尘器联合除尘效率比单种水膜除尘器除尘效率高;湿法脱硫系统对PM2.5的脱除也有明显的作用,由于除雾器不能全部去除小雾滴,这些雾滴中固体颗粒被干燥和水溶性物质结晶析出,PM0.32颗粒物粒数浓度有所增加,而PM0.32~2.5的颗粒物粒数浓度有所减少,但总质量浓度降低.     

中小燃煤锅炉PM2.5排放特征实测研究

中小燃煤锅炉是我国工业和民用部门最主要的供热方式,掌握其一次颗粒物的排放特征对于研究大气PM2.5的来源和控制途径具有重要意义.本研究通过实测中小燃煤锅炉烟气,获得了中小燃煤锅炉PM2.5及以下粒径段的排放因子和分布,并分析了各粒径段的颗粒密度及除尘装置的去除效率.研究发现,PM2.5质量排放因子平均为(0.123±0.061)kg·t-1,PM2.5粒子数的排放因子平均为(3.17±1.65)×105t-1,烟气中70~120 nm粒径段的积聚模态颗粒在质量和数量上都高于其他粒径段.锅炉燃烧负荷是影响锅炉PM2.5排放的重要因素,锅炉的燃烧负荷越低,PM2.5排放将随之降低.实测锅炉的PM2.5排放因子显著低于物料衡算结果,说明采用物料衡算方法可能极大地高估了现有排放清单中工业燃煤锅炉的一次PM2.5排放量.     

我国人为源气态活性氮排放时空变动特征分析

随着粮食和能源需求的增加,农业生产和化石燃料燃烧带来的活性氮污染越来越成为影响我国环境和人民健康的重要因素之一.通过对2000、2005及2010年全国31个省(直辖市、自治区)的人为源气态活性氮排放总量、单位GDP及单位人均排放量的Moran's I指数和GetisOrd G*i指数进行空间分析,探讨了气态活性氮排放及其强度的时空变动特征.结果表明,全国的气态活性氮排放及其强度呈现明显的空间集聚特征.在空间分布特征上,全国活性氮排放表现为高值集聚分布,其热点主要位于华北平原和长江中下游平原地区;排放强度方面则为高值聚集和低值聚集兼备.通过对3个年份的冷热点比较分析发现,排放强度的冷点地区变化较小,热点地区变化较大.其中,单位GDP排放强度方面,冷点地区处于东南沿海地区,热点地区则由西北地区缩小到四川、甘肃两省;而单位人口排放强度方面,冷点地区范围有所缩减,热点地区则由分散转变为集中分布于京津冀及周边的山西、内蒙古和辽宁等.分析人为源气态活性氮时空分布格局和特征及其形成原因,可为评估和减缓气态活性氮排放对生态环境的影响提供科学基础.     

Characterization of coffee residues pellets and their performance in a residential combustor

Spent coffee grounds (SCG) and coffee husks (CH) were evaluated as biofuels, after densification, for energy production. CH represent a specific problem for the coffee industry due to a low calorific value, high ash content, and a very low bulk density. Hence, the energetic potential of SCG (95 wt%)/CH (5 wt%) blend and pure SCG (100%) were examined. The blend of SCG and CH was limited to 5 wt% of CH because of the low bulk density of CH. Therefore, physicochemical and energetic characterizations of the produced pellets were performed. Thermogravimetric analyses were performed under nitrogen and air atmospheres to evaluate the CH behavior in the blend. Characterization study shows that both produced pellets could reach the French Agropellets standard (AQI). Thermal degradation showed that the mean reactivity of the SCG/HC pellets was higher than pure SCG. Then, combustion experiments were performed in a domestic combustor, after modification of the boiler power in order to improve its energetic performances. The presence of CH led to a rise of CO, NOx, VOC’s, and particle emissions. Nevertheless, the performances of the biofuels are almost in agreement the NF EN 12809 standard.     

Highly efficient conversion of sugarcane bagasse pretreated with liquid hot water into ethanol at high solid loading

Liquid hot water (LHW), an environmental-friendly physico-chemical treatment, was applied to pretreat the sugarcane bagasse (SCB). Tween80, a non-ionic surfactant, was used to enhance the enzymatic hydrolysis of the pretreated SCB. It found that 0.125 mL Tween80 /g dry matter could make the maximum increase (33.2%) of the glycan conversion of the LHW-pretreated SCB. A self-designed laboratory facility with a plate-and-frame impeller was applied to conduct batch hydrolysis, fed-batch hydrolysis, and the process of high-temperature (50°C) fed-batch hydrolysis following low-temperature (30°C) simultaneous saccharification and fermentation (SSF) which was adopted to overcome the incompatible optimum temperature of saccharification and fermentation in the SSF process. After hydrolyzing LHW-pretreated SCB for 120 h with commercial cellulase, the total sugar concentration and glycan conversion obtained from fed-batch hydrolysis were 91.6 g/L and 68.3%, respectively, which were 9.7 g/L and 7.3% higher than those obtained from batch hydrolysis. With Saccharomyces cerevisiae Y2034 fermenting under the non-sterile condition, the ethanol production and theoretical yield obtained from the process of SSF after fed-batch hydrolysis were 55.4 g/L and 88.3% for 72h, respectively, which were 15.5 g/L and 24.7% higher than those from separate fed-batch hydrolysis and fermentation. The result of this work was superior to the reported results obtained from the LHW-pretreated SCB.