SRHSC梁主要设计参数损伤敏感度分析

以型钢高强混凝土(SRHSC)梁为研究对象,结合SRHSC梁受力机理及承载能力的试验研究成果,提出了极限状态下的承载能力是评价梁力学性能的关键指标,将损伤前后梁正截面抗弯承载力之比和斜截面抗剪承载力之比的均值作为自变量,给出了SRHSC梁损伤表征函数,并借助"预定损伤法",揭示了主要设计参数对SRHSC梁损伤演化的影响规律。研究成果将为建立地震激励下SRHSC框架结构楼层损伤模型提供理论和数据支持。     

京津冀地区面向人居环境之水安全格局初探

采用文献法对近年京津冀水资源、水环境、水污染、水灾害、水管理等水安全情势进行相关数据分析,从总体上显示出水危机问题和京津冀地区快速城市化发展的关联性.结果表明:1)京津冀城市群必须向节水型社会模式转型;2)建立区域及城市间的协调机制,才能有效克服流域与区域等级的水问题;3)实现京津冀地区水安全格局的治理行动计划网络,提出保护恢复体系、净化循环体系、限制节约体系、调度再造体系、蓄滞防洪减灾体系五大体系.     

外浮顶罐充氮管网设计及有效性试验验证

为了预防外浮顶罐密封圈雷击火灾,提出在密封圈内充入氮气的保护方法.将安全含氧量作为充氮的惰化目标,对外浮顶罐充氮管网进行设计,并通过试验来验证充氮管网的有效性.试验得到了充氮流量、进出气孔数量及管径与有效充氮时间的关系.若以142 m3/h的流量对容量为10×104 m3的外浮顶罐密封圈内充氮,则46.5 min内可以达到充氮惰化目标.雷电预警时间为60 ～ 90 min的条件下,充氮时间小于预警时间,表明所设计的管网是有效的.     

危险品运输网络优化设计研究综述

为分析当今反恐新形势下的危险品运输网络优化设计问题的研究现状,系统总结国内外关于一般场景和恐怖袭击威胁2种情况下危险品运输网络优化设计研究的主要模型和方法,梳理两者现有的研究内容,并讨论其共性及恐怖袭击威胁情景下的研究的新特点。结果发现:目前关于解决危险品运输网络优化设计问题模型的鲁棒性研究较为缺乏,尤其是模型在更为复杂和不确定性更强的恐怖袭击情景中适用性不强;危险品运输的鲁棒优化模型即使在突发事件条件下,也可以使决策者能够作出相对满意的决策;鲁棒性危险品运输网络能够规避风险扰动,可用来防止在恐怖袭击中因危险品车辆爆炸等造成更大的危害。     

Evaluating Alternative Temporal Survey Designs for Monitoring Wetland Area and Detecting Changes Over Time in California

Evaluation of wetland extent and changes in extent is a foundation of many wetland monitoring and assessment programs. Probabilistic sampling and mapping provides a cost‐effective alternative to comprehensive mapping for large geographic areas. One unresolved challenge for probabilistic or design‐based approaches is how best to monitor both status (e.g., extent at a single point in time) and trends (e.g., changes in extent over time) within a single monitoring program. Existing wetland status and trends (S&T) monitoring programs employ fixed sampling locations; however, theoretical evaluation and limited implementation in other landscape monitoring areas suggest that alternative designs could increase statistical efficiency and overall accuracy. In particular, designs that employ both fixed and nonfixed sampling locations (alternately termed permanent and temporary samples), termed sampling with partial replacement (SPR), are considered to efficiently and effectively balance monitoring current status with detection of trends. This study utilized simulated sampling to assess the performance of fixed sampling locations, SPR, and strictly nonfixed designs for monitoring wetland S&T over time. Modeled changes in wetland density over time were used as inputs for sampling simulations. In contrast to previous evaluations of SPR, the results of this study support the use of a fixed sampling design and show that SPR may underestimate both S&T.     

基于Matlab分析的台阶式场地平整方案优化设计

在某市餐厨垃圾处理厂场地平整设计中,利用Matlab软件对台阶式场地平整方案进行优化设计,即在Auto CAD环境下用等高线法计算各级台阶的土方量,用Matlab软件拟合出台阶设计高程和土方量的函数关系式,在约束条件下求解,得到了最优设计高程和基于土方挖填平衡条件下场地平整的最小土方工程量,为工程总平面布置提供优化方案。其分析设计方法可为工业企业台阶式场地的总平面布置设计提供借鉴。     

下凹式绿地在降雨径流控制中的应用研究

下凹式绿地具有蓄渗雨水、削减洪峰流量、净化雨水、防止土壤侵蚀等优点,且投资少,是一种能同时满足环境、生态、经济等多重效应的新型雨水利用措施;它的应用将有效缓解城市水资源匮乏和降雨地表径流造成的面源污染,同时能在一定程度上防止城市内涝.在介绍下凹式绿地对降雨径流控制的基础上,着重综述了下凹式绿地对雨水的蓄渗、净化作用及其设计方面的研究进展.     

Sampling and Mapping a Soil Erosion Cover Factor by Integrating Stratification,Model Updating and Cokriging with Images

Cost-efficient sample designs for collection of ground data and accurate mapping of variables are required to monitor natural resources and environmental and ecological systems. In this study, a sample design and mapping method was developed by integrating stratification, model updating, and cokriging with Landsat Thematic Mapper (TM) imagery. This method is based on the spatial autocorrelation of variables and the spatial cross-correlation among them. It can lead to sample designs with variable grid spacing, where sampling distances between plots vary depending on spatial variability of the variables from location to location. This has potential cost-efficiencies in terms of sample design and mapping. This method is also applicable for mapping in the case in which no ground data can be collected in some parts of a study area because of the high cost. The method was validated in a case study in which a ground and vegetation cover factor was sampled and mapped for monitoring soil erosion. The results showed that when the sample obtained with three strata using the developed method was used for sampling and mapping the cover factor, the sampling cost was greatly decreased, although the error of the map was slightly increased compared to that without stratification; that is, the sample cost-efficiency quantified by the product of cost and error was greatly increased. The increase of cost-efficiency was more obvious when the cover factor values of the plots within the no-significant-change stratum were updated by a model developed using the previous observations instead of remeasuring them in the field.     

高炉出铁场除尘方案研究

某钢铁企业高炉炼铁车间的出铁场在生产过程中产生大量高浓度的烟尘,对厂区的大气环境及周边的环境造成严重污染,同时直接危害了职工的身体健康。通过对整个出铁场除尘工艺系统及通风状况的分析及实际应用情况,总结出了适合该场合的系统除尘方案。     

SCR脱硝装置中整流格栅的优化设计

基于CFD模拟软件对某选择性催化还原(SCR)脱硝装置进行数值模拟,分析了不同整流格栅间距、形式对反应器上部流场的影响。以不同高度截面的烟气速度变异系数CV和最大烟气入射角为定量评价指标,给出了满足性能要求的整流格栅设计参数范围以及最优设计方案。