显微构造分析法和包裹体方法在断层研究中的应用

在工程建设中，工地及邻近地区的断层活动性是工程设计的一项重要依据。在总结以往研究的基础上，介绍了显微构造分析法和包裹体方法在断层活动性评价中的国内外最新研究成果。事实表明，这两种方法在工程地质领域具有良好的应用前景。     

孟连,丽江地震前云南天文台时纬残差异常

本文分析了云南天文台光电等高仪自有观测以来的时纬残差异常与云南及其周邻地区大地震的对应关系；并报导了孟连、丽江地震前云南天文台的时纬残差均有明显异常。这再次证明时纬残差的明显异常可为台站周围的强震预测提供可靠信息     

火炸药热自燃点测试及数据自动记录的探讨

简述了所建立的炸药热自燃点测试系统的结构和工作原理，阐明了在多试样热自燃点测试中，采用温度数据自动记录系统的必要性。着重讨论了所研制的多试样火炸药热自燃点自动记录仪的结构和工作原理。     

THE ARMA MODELS APPLIED TO THE FLOW OF KARSTIC SPRINGS1

ABSTRACT: Autoregressive moving average (ABMA) models have been applied to study the flow series of the karstic springs of La Villa, Fuente Mayor (Spain), and Aliou (France). The theoretical meaning of the parameters involved in the model upon applying it to a simplified scheme of the emptying of a karstic aquifer is first analyzed. The types of transformations necessary to apply these models to the flow series that lack normality and have strong periodic components are also indicated, as are the advantages of this type of model and the physical significance of the parameters obtained, with respect to the standpoint of hydraulics, ranging from rather homogeneous aquifers (La Villa) to extremely karstic (Aliou), including aquifers with intermediate characteristics (Fuente Mayor).     

Assessment of the maximum possible liquid superheat during flashing leak flow

During the discharge of flashing liquids through leaks due to abrupt depressurization a transient thermodynamic non-equilibrium in the form of a boiling delay in the superheated liquid flow can occur. As a consequence the actual mass flow quality is smaller than calculated under the assumption of an immediate adjustment of the thermodynamic equilibrium between the phases. For the prediction of the leak mass flow for a given pressure difference the magnitude of this self-adjusting mass flow quality is needed.

Most of the models cited in the literature include only the equilibrium mass quality as limiting quantity and ignore further effects as that of the depressurization velocity or the mean nucleus distance. For the assessment of the maximum possible liquid superheat during flashing only the conduction heat transfer from a stagnant liquid to the bubble surface is used to describe the bubble growth.

The sub-model for the bubble growth due to expansion and mass transfer necessary for the global prediction of the transient thermodynamic non-equilibrium in flashing liquids was validated using bubble radii measured by Hooper et al. [Bubble growth and pressure relationship in the flashing of superheated water. Technical publication 6904, Mechanical Engineering Department, University of Toronto, 1969] for the case of a sudden depressurization of initially saturated water. On this basis the calculated time-dependent temperature field, the actual mass quality, the mean liquid temperature and, in comparison to the corresponding values based on the assumption of immediate thermodynamic equilibrium, the maximum possible liquid superheat are predicted.     

变光焊接眼护具响应时间定义分析

通过对不同标准的变光焊接眼护具响应时间定义分析，提出各标准定义及计算值的区别，以利于帮助消费者进行产品选择和企业对产品设计的改进。     

最小点火能的影响因素及计算误差分析研究

对可燃气体 (液体蒸气 )、可燃粉尘的最小点火能测试中的影响因素进行了分析总结 ,并结合实验分析了求得最小点火能精确值所需要的环境条件和设备设施条件———敏感条件 ;分析了敏感条件下运用常规测试方法和常规计算公式中存在较大误差的原因 ,进而提出了相对准确合理的测试方法及计算公式———直接积分法及拟合近似积分法 ,从而大大降低了误差度 ,获得了比较符合实际的数据。     

一种DSP+FPGA实时信号处理系统

简要叙述了常用的信号处理系统的类型与处理机结构,介绍了正逐步得到广泛应用的DSP+FPGA处理机结构,在此基础上提出了一种实时信号处理的线性流水阵列,并举例说明了该结构的具体实现,最后分析说明了此结构的优越性。     

南充市空气中可吸入颗粒物污染水平分析

本文在连续1年又5个月同步采样的基础上，测得南充市市辖三城区5个采样监测点环境空气中PM10的浓度及其时空变化进行了分析。结果表明，PM10的日平均浓度范围为0．020～1．030mg／m^3，超标率达38．0％；周日均浓度在0.040～0．520mg／m^3之间，超标率达到了37．8％。空气污染最重为嘉陵城区，其次为高坪城区，再次为石油学院、炼油厂和市府二院。浓度季节变化特征表现为冬季最高，其次为秋季，再次为春季，最轻为夏季。