再生铜冶炼过程中重金属排放特征和控制

再生铜冶炼是重要的重金属排放源,为掌握再生铜冶炼过程中重金属的排放特征和控制效果,通过固定源等速采样装置采集不同冶炼阶段的烟气样品,利用电感耦合等离子体质谱仪测定烟气和飞灰中重金属的浓度,并估算重金属的排放因子.结果表明,在冷却阶段烟气中重金属和颗粒物的浓度较高,经过布袋除尘器和吸附塔等污染控制装置后,重金属和颗粒物被协同脱除,脱除效率达80%～99%.排放烟气中重金属的浓度在阳极炉不同工艺段中的排序为：加料熔融段>氧化段≈还原段,且As、 Pb、 Cr、 Sn、 Sb和Cd的平均排放因子分别为2.6×10³、2.4×10³、2.7×10³、5.6×10²、34.1和9.8 mg·t^-1,烟气中重金属和颗粒物的浓度均满足行业排放标准.飞灰中Cu和Zn的浓度较高,具有回收利用价值.     

Technological innovation paths toward green industry in China

With the environmental carrying capacity reaching its limits and the decreasing margin benefits of traditional production factors, the green transformation and green development through technological innovations has been a major direction for the future development of Chinese industries. However, the characteristics and heterogeneities of various types of industries call for different approaches regarding technological innovations. How to choose the most effective mode of technological innovation according to the characteristics of a certain industry has been a key issue. This paper measures the green total factor productivity of 32 industrial trades using the Slacks Based Measure(SBM)-DDF method. The effects of three innovation modes in the green transformation of industrial industry, including the independent innovation(Ⅱ), the technology introduction(TI), and the government support(GS), are empirically analyzed based on industry heterogeneity. Results indicate that the green total factor productivities of different industries show significant differences if taking into account the energy input and the undesirable output of pollutant emissions. The green total factor productivities of traditional high input,high pollution, and high energy consumption industrial trades were significantly lower than those with obvious green features. The year of 2009 is a leap year for the industrial green transformation in China. For resource-intensive industries, the II and the GS are the important ways to achieve green transformation. For labor-intensive industries, the TI is the best path to achieve green transformation, while for technology-intensive industries, the II is the primary driving force for the promotion of green developments. In addition, the innovation-compensating effect of the current Chinese environmental regulations to the resource-intensive industries has been revealed. Improving the overall scale and the industrial concentration of the industries is also beneficial for the green transformation of the industries.     

利用活化粉煤灰处理造纸废水的研究

通过正交试验,对粉煤灰处理造纸废水的影响因素进行了研究。研究结果表明：对粉煤灰进行活化,能增加其对造纸废水COD的去除效果;最佳的试验设计方案为：粉煤灰经40％硫酸活化、粒度160—200目、投加量为30g／100ml;影响COD去除率的大小顺序为：投加量影响最大,粒度次之,活化方式影响最小。     

The accounting method and application of CO2 emissions responsibility by the electricity sector at the provincial level in China

When accounting the CO₂ emissions responsibility of the electricity sector at the provincial level in China,it is of great significance to consider the scope of both producers’ and the consumers’ responsibility,since this will promote fairness in defining emission responsibility and enhance cooperation in emission reduction among provinces.This paper proposes a new method for calculating carbon emissions from the power sector at the provincial level based on the shared responsibility principle and taking into account interregional power exchange.This method can not only be used to account the emission responsibility shared by both the electricity production side and the consumption side,but it is also applicable for calculating the corresponding emission responsibility undertaken by those provinces with net electricity outflow and inflow.This method has been used to account for the carbon emissions responsibilities of the power sector at the provincial level in China since 2011.The empirical results indicate that compared with the production-based accounting method,the carbon emissions of major power-generation provinces in China calculated by the shared responsibility accounting method are reduced by at least 10%,but those of other power-consumption provinces are increased by 20% or more.Secondly,based on the principle of shared responsibility accounting,Inner Mongolia has the highest carbon emissions from the power sector while Hainan has the lowest.Thirdly,four provinces,including Inner Mongolia,Shanxi,Hubei and Anhui,have the highest carbon emissions from net electricity outflow- 14 million t in 2011,accounting for 74.42% of total carbon emissions from net electricity outflow in China.Six provinces,including Hebei,Beijing,Guangdong,Liaoning,Shandong,and Jiangsu,have the highest carbon emissions from net electricity inflow- 11 million t in 2011,accounting for 71.44% of total carbon emissions from net electricity inflow in China.Lastly,this paper has estimated the emission factors of electricity consumption at the provincial level,which can avoid repeated calculations when accounting the emission responsibility of power consumption terminals（e.g.construction,automobile manufacturing and other industries）.In addition,these emission factors can also be used to account the emission responsibilities of provincial power grids.     

Determinants of workers’ attitude toward low-carbon technology adoption: empirical evidence from Chinese firms

As the main contribution of China’s carbon emissions, low-carbon production in industrial firms becomes an inevitable choice, and industrial firm employees’ attitudes on low-carbon new technology directly influence the results of low-carbon production. Based on the Unified Theory of Acceptance and Use of Technology model, structural equation modeling was used to analyze the main factors influencing firm staff to accept low-carbon new technology. The study reveals that the employee’s social impact, performance expectation, effort expectations and convenient conditions, and employee characteristics are all main factors affecting their acceptance attitudes on low-carbon new technology. And social influence has the largest effect on employees’ acceptance attitudes toward low-carbon new technology. Accordingly, relevant policy recommendations are put forward for the future research direction.     

餐厨垃圾高温厌氧消化产沼气的试验研究

探究了温度、含固率、pH及接种率对餐厨垃圾厌氧消化产沼量的影响,并设计L9(34)正交试验进行厌氧发酵工艺优化研究。结果表明,在温度为55℃、含固率为8%(质量分数)、pH为7.00、接种率为90%(质量分数)时,厌氧发酵累积产沼量为809.0mL/g(以挥发性固体计);各影响因素对产沼量的影响大小为温度pH接种率含固率。     

Exploration of relationships between safety performance and unsafe behavior in the Chinese oil industry

Safety performance is comprised of two components, safety compliance and safety participation. However, relationships between safety performance and unsafe behavior have not been thoroughly investigated. In this work, scales for safety compliance and safety participation were revised for use in the oil industry, and job burnout scale was developed on the basis of the Maslach Burnout Inventory-General Survey (MBI-GS). A structural equation model was then employed to investigate the interactions of these factors for 238 front-line oil workers from the PetroChina Huabei Oilfield Company in China. From the results, it was determined that workers' unsafe behavior could not be reduced significantly solely from these two dimensions of safety performance. Compared with safety participation, safety compliance was found to have a greater influence on unsafe behavior. However, job burnout was found to be a significant moderator between these two components and unsafe behavior. Furthermore, it was determined that oil workers' occupational psychological health conditions must be taken into account to improve organizational safety management and reduce workers’ unsafe behavior.     

Criteria for the evaluation of dioxins in the environment

In FRG and other countries unequivocal criteria for the limitation of dioxins (PCDD's/PCDF's) in food like vegetables and fruits are lacking. These have to be directly associated with the limitation of dioxins in the soil and the deposition of particulate matter as the two main pathways for plant contamination. Based on recent investigations in the vicinity of cable-waste incinerators in Northrhine-Westphalia with comparatively high contents of dioxins in garden plants and soils and other sources of dioxins, considerations are given for the establishment of the criteria urgently needed.     

连续流分段进水生物脱氮工艺控制要点及优化

主要介绍了分段进水生物脱氮工艺的系统工作原理及工艺特性,并探讨了该工艺运行操作和设计的几个重要影响因素,如进水流量分配比、溶解氧、污泥回流比、C/N比等,并在此基础上讨论了分段进水生物脱氮工艺的优化控制对策.     

加速厌氧污泥颗粒化的研究进展

厌氧污泥颗粒化过程是一个多阶段过程,取决于操作条件、基质组成等多种因素.在简述污泥颗粒化机理及影响因素的基础上,综述了近年来加速厌氧污泥颗粒化的研究进展,指出厌氧污泥颗粒化应用前景广阔,并提出了几点建议.希望能为厌氧污泥颗粒化技术的工程实践提供一定的理论基础.