土壤胡敏素对铜离子的吸附作用及其机理研究

以暗棕壤为供试土壤,研究了不同溶液pH值、离子强度、接触时间、反应温度和初始铜离子(Cu~(2+))浓度条件下,胡敏素对Cu~(2+)的吸附作用;利用扫描电子显微镜(SEM)、X-射线能量色散谱(EDS)、傅立叶变换红外光谱(FTIR)和X-射线光电子能谱(XPS),对胡敏素/胡敏素-Cu~(2+)复合物的表面形貌、元素分布和官能团组成进行了分析;应用延展X-射线吸收精细结构谱(EXAFS),对吸附态Cu~(2+)的局域配位结构进行了表征.结果表明:胡敏素对Cu~(2+)的吸附量随pH值、接触时间、反应温度和Cu~(2+)浓度的增加而增加,但随离子强度的增加而下降;吸附动力学符合准二级动力学方程,而吸附等温线用Langmuir方程的拟合效果较好;吸附过程需要能量,是自发、吸热和自由度增加的缔合反应;吸附Cu~(2+)之后,胡敏素表面产生了团聚现象,表面羧基、羟基、吡啶氮和N—O基团参与了Cu~(2+)的吸附作用,同时吸附态Cu~(2+)是以内层配位形式与胡敏素表面的O/N和C原子结合.     

天津大气稳定度和逆温特征对PM2.5污染的影响

利用气象铁塔资料分析了逆温频率和强度,采用温差-风速法计算了天津地区大气稳定度,探讨了其相互关系及对PM_2.5浓度月均值和超标日的影响,并对一次重污染过程中大气稳定度和逆温分布特征进行了分析.结果表明,2015年9月~2017年8月A,B,C,D,E和F类大气稳定度发生频率依次为6.7%,11.4%,22.4%,46.1%,11.1%和2.2%,秋冬季节稳定类天气（E,F类）较多,全年白天各时段均以不稳定类大气为主,夜间大气稳定度以中性为主,秋冬季夜间稳定类高达30%~40%.观测期内冬季逆温频率最高,5：00~8：00和21：00~23：00超过90%,冬季逆温强度也最高.随着稳定类大气层结日数的增多,PM_2.5月均值和污染日数均有所增大,同时逐月PM_2.5均值、污染日发生频率均与逆温发生频率呈正相关关系.2016年12月16~21日的一次重污染天气过程显示,PM_2.5受到大气稳定度和逆温发展的影响,霾形成、雾-霾交替和消散等阶段大气稳定度和逆温特征具有显著的不同.大气持续趋于稳定及逆温强度的逐渐增大,对污染生成和维持起了非常重要的作用,污染过程中大气稳定度和逆温特征的精细化分析有助于提升重污染天气预报预警水平.     

高温条件下高速碰撞试验技术研究

目的建立高温条件下结构的高速碰撞试验技术。方法基于理论和试验方法,研究影响试样加热/保温、碰靶速度和姿态的关键因素,利用次口径发射技术和电炉技术实现试样的加热、保温和加速。采用间接方法测试试样碰靶时的温度,联合应用次口径发射技术和靶体,控制试样的碰靶姿态,并利用高速摄影技术对其进行测试。通过薄壁圆柱筒的高温高速碰靶验证高温试验技术的有效性。结果建立了加热、加速和姿态控制一体化的高温高速碰撞试验技术,获得了不同尺寸薄壁圆柱筒不同姿态碰靶时的高温冲击动力学响应。正碰时,撞击端镦粗,尾端收缩,尾端的凹陷大于碰撞端的变形;侧碰时,圆筒呈马鞍状;角碰时的变形为楔形。随着圆筒的强度和刚度的降低,圆筒的变形增加,整体发生坍塌,出现大量的皱褶。结论建立的试验技术切实有效,可以用于高温条件下结构高速碰撞效应的研究。     

环境升温过程对常温固化环氧树脂热力学性能的影响

目的提高常温固化环氧树脂体系的高温使用性能。方法采用常温固化剂T31、中温固化剂IPDA以及高温固化剂DDM作为混合固化剂,对E-44型和AG-80型混合环氧树脂体系进行常温固化反应,并分析环境升温过程对固化物热力学性能的影响。通过DMA分析、热变形测量、固化度测试,分别评价室温固化环氧树脂在环境升温过程前后的玻璃化转变温度、热变形量及体系内部的固化反应程度变化,并通过吸水率测试和弯曲强度测试对玻璃纤维布增强常温固化环氧树脂基复合材料的耐湿热性能以及高温条件下的力学性能进行分析。结果环氧树脂常温固化物的tg为85.21℃,经1.5℃/min的平均升温速率加热至90℃之后,该环境升温过程使固化物的固化度增大至92%以上,tg增长为132.06℃的同时热变形温度增大。其复合材料耐湿热性能提高,且100℃时弯曲强度的保持率为65%,对于加热至120℃的环境升温过程,固化物的固化度接近96%,tg增长为144.45℃的同时热变形温度进一步提高,其复合材料耐湿热性能改善程度更加明显,且130℃时弯曲强度保持率仍接近60%。结论常温、中温、高温混合固化剂的合理复配有助于环氧树脂体系在环境升温变化的诱导条件下发生梯度式固化反应,使体系内部的交联固化程度迅速升至较高水平,可以有效提高其玻璃化转变温度,显著改善常温固化环氧树脂体系在高温条件下的热力学性能。     

Development of monitoring technology for airborne particulate matter

Particulate matter suspended in the air has adverse effects onhuman health. Its level of concentration is an important parameter in evaluating the degree of hazard it poses to the atmosphere. Conventional methods used in measuring particulatematter are often filter-based, which indicates some disadvantagesbecause such a base requires labor and time. In this study, to achieve real-time measurements, a new electrical method was developed for measuring PM10 and PM2.5 concentrations. The basicprinciple is to electrically charge particles passing through thePM inlet using a corona charger and measure the currents createdby charged particles to obtain the number concentration of particulate matter. A new type inlet based on the particle cupimpactor configuration was designed and its performance was evaluated. A unipolar diffusion charger was developed and thecharger's efficiency was determined experimentally in terms ofPn, which represents the penetration through the charger,P, times the average charge number acquired by a particle,n, for different particle sizes. The correlation was constructed between the PM10 (or the PM2.5) mass concentrationsand the electrical currents due to particles, which were chargedby the diffusion charger.     

上海市机动车污染实时排放预警系统设计与应用

研究上海市机动车污染的动态排放测算和网格化动态排放清单构建,在实时的交通数据和交通环境监测数据的基础上,结合交通模型、机动车排放清单模型等业务模型和算法,依托大数据存储、可视化和GIS等技术,开发了上海市机动车污染物实时排放预警系统,实现了上海市全市道路的机动车动态排放测算、交通环境政策实施情景模拟和网格化排放清单,更新频率为每30 min一次,包含PM、NOx、CO、SO2、VOCs等污染物和9种车型。系统建成后直接服务于首届中国国际进口博览会,为大气污染排放实时总量跟踪评估、污染源管控措施分析及监测成因分析等提供了有力的实时数据和技术支撑。     

The importance of temperature in assessing iron pipe corrosion in water distribution systems

Temperature is expected to play a significant role in the corrosion of iron pipes in drinking water distribution systems. Temperature impacts many parameters that are critical to pipe corrosion including biological activity, physical properties of the solution, thermodynamic and physical properties of corrosion scale, and chemical rates. Moreover, variations in temperature and temperature gradients may give rise to new corrosion phenomena worthy of consideration by water treatment personnel.     

evaluation of a measurement method for forest vegetation in a large-scale ecological survey

We evaluate a field method for determining species richness andcanopy cover of vascular plants for the Forest Health MonitoringProgram (FHM), an ecological survey of U.S. forests. Measurementsare taken within 12 1-m² quadrats on 1/15 ha plots in FHM.Species richness and cover are determined for four height classes(strata) within each quadrat and aggregated by stratum over the entireplot. We estimated (1) the agreement between experienced trainers andinexperienced technicians who collected the data on this survey(accuracy) and (2) the agreement among the technicians (precision) forresults on species richness and cover from 3 test plots at 3 timeintervals. The methods appear to be highly precise, although somediscrepancies with the values obtained by the trainers were found.Trainers found significantly more species in the ground stratum (0–0.6 m) and measured significantly more cover in the uppermost stratum(>4.9 m). The proportion of variation due to measurement error andtemporal variability was less than 13% for species richness (all strata)and cover (all but one stratum). This indicates that the method issuitable for monitoring changes in species richness and canopy coverfor a large-scale synoptic monitoring project such as FHM.     

A study on the orbit of air temperature movement

In this paper, we describe an air temperature movement by mapping its time series to the polar coordinates: the value of the time series is plotted on the radial coordinate and the time on the angular coordinate. In this way, both the yearly and daily air temperature movements from five different locations of China are used to demonstrate that, in an intuitionistic view, air temperature movement is neither random nor chaotic, but has its own orbit. We then propose an elliptic orbit model for the air temperature movement. Our proposed model provides quite good results when it is applied to the evaluation of yearly air temperature movements in eight locations in various parts of the world, and the evaluation of daily air temperature movements in five locations in Hunan Province of China on December 17, 2005. Results show that our approach provides a concise and helpful model for air temperature analysis.     

夜间建筑施工噪声扰民监测方法探讨

以一家夜间施工工地为例 ,通过对现有夜间建筑施工噪声测量方法及国家和深圳经济特区有关噪声污染定义的分析 ,阐述了夜间施工工地噪声扰民监测方法