散射光下铁(III)-丙酮酸盐配合物还原铬(VI)的研究

研究了在散射光下铁(III)-丙酮酸盐配合物对铬(V I)的光还原反应;考察了溶液pH、铁(III)、丙酮酸钠、铬(V I)浓度对反应的影响;分析了铬(V I)光还原反应的动力学。实验结果表明:铁(III)-丙酮酸盐配合物体系能在较弱的散射光下还原铬(V I)。在铬(V I)浓度为19.2μm o l/L、铁(III)浓度为10.0μm o l/L、丙酮酸钠浓度为240μm o l/L、pH为3.0、光照240m in的条件下,铬(V I)的还原率达到99.7%。从表观动力学方程的反应级数看,铁(III)的级数(0.83)最高,铁(III)浓度是影响铬(V I)光还原反应速率的主要因素,铁(II)是铬(V I)光还原的主要还原剂。     

ARE RURAL RESIDENTS WILLING TO PAY ENOUGH TO IMPROVE DRINKING WATER QUALITY?1

ABSTRACT: The concentrations of iron and sulfate in community water supplies are a concern for a number of areas in southwestern Minnesota. This study used the contingent valuation method to determine how much consumers would be willing to pay to improve their drinking water quality. On average, individuals were willing to pay US$5.25 per month (in 1995 U.S. dollars) to reduce the level of iron and US$4.33 per month to reduce the level of sulfate in their water to the USEPA's secondary standards for drinking water quality. Respondents with negative perceptions of their drinking water quality were willing to pay more to improve water quality. The aggregate annual willingness to pay (WTP) for all consumers in community water systems in southwestern Minnesota that were out of compliance with water quality standards were estimated to be US$2.4 million and US$2.0 million (in 1995 dollars) for reducing the levels of iron and sulfate, respectively. Yet the total WTP of consumers who use small community water systems may not be enough to pay the full cost of providing improved water in those systems. Economies of scale in water treatment and difficulties in financing improvements mean that technical innovation, government assistance, or institutional changes may be needed to improve water quality in these areas.     

供水管网铁释放的影响因素相对重要性分析

供水管网的铁释放问题近年来日益受到关注.影响供水管网铁释放的因素众多,本研究选取了pH、溶解氧(DO)、碱度(Alk)、硬度、氯离子(Cl~-)、硫酸根(SO_4~(2-))、温度(T)和水力停留时间(HRT)这8个影响因素,利用逐步回归和偏相关分析,建立了铁释放的非线性幂指数模型,并用标准化回归系数和偏相关系数比较了这些因素的相对重要性.结果表明,铁释放模型拟合效果良好;用标准化回归系数衡量影响因素相对重要性时,SO_4~(2-)、HRT、Cl~-和T是相对重要的因素,相对重要性排序为SO_4~(2-)≈HRTCl~-T;用偏相关系数衡量时,HRT、SO_4~(2-)、Alk、Cl~-和T是相对重要的因素,排序为HRTSO_4~(2-)AlkCl~-T.综合两种系数的分析结果,HRT、SO_4~(2-)和Cl~-是本研究条件下相对重要的因素,T和Alk的相对重要性视实际情况变动.     

我国工业危险废物的来源、处理及监管对策与建议

通过大量环境统计数据的分析,对我国工业危险废物的产生、综合利用、处置和贮存,从行业来源、区域分布进行了分析和总结。结合我国工业危险废物企业自建设施和政府集中处理设施处理情况,对我国工业危险废物的处理和环保监管对策提出了若干建议。     

Ti/SnO_2-Sb阳极-空气阴极电催化降解染料废水

为解决电化学法处理高盐染料废水存在的能耗大、成本高等问题,分别采用溶胶-凝胶法和辊压法制备Ti/SnO_2-Sb阳极和空气阴极,构建了Ti/SnO_2-Sb阳极-空气阴极双极体系(TSSA-ADC)。甲基橙(MO)作为高盐染料废水的典型污染物,考察了电流强度、MO浓度、电解液浓度和初始p H对TSSA-ADC体系和TSSA单阳极体系降解MO的影响。结果表明:与TSSA单阳极体系相比,TSSA-ADC体系具有更好的抗有机负荷冲击、抗盐分冲击、抗酸碱波动能力,能够维护酸碱平衡防止硬度离子结垢。最佳反应条件为电流强度为0.030 A,电解液浓度为3%,MO浓度为100 mg/L,初始pH=6。以MO去除率达到98%为基准,TSSA-ADC体系比TSSA体系可节能74.26%。     

Shewanella oneidensis MR-1对硫化汞的生物利用性研究

在实验室模拟条件下,研究了铁还原菌奥奈达希瓦式菌Shewanella oneidensis MR-1对固态硫化汞的生物溶解、生物甲基化作用及其影响因素.结果表明,铁还原菌S.oneidensis MR-1在含硫培养基中生长良好,低浓度硫素能够促进其生长,高浓度时细菌生长则受到抑制,这种抑制主要表现在菌株生长曲线迟缓期的延长;铁还原菌S.oneidensis MR-1能够利用固态硫化汞,促进其溶解并迅速进行汞甲基化;在S.oneidensis MR-1的耐硫化物范围内,菌株对硫化汞的生物溶解作用随着硫化钠浓度的增大而增强,但生物甲基化作用只在低浓度硫化钠时受到促进,硫化钠浓度过高时则会受到抑制;此外,弱酸性环境比酸性及中碱性的环境更有利于S.oneidensis MR-1对硫化汞的生物溶解及甲基化.     

零价铁去除废水中的汞

研究了零价铁(zero-valent iron,ZVI)去除废水中Hg2+的动力学特征及其影响因素,初步探讨了ZVI与Hg2+的作用机制.结果表明,ZVI对废水中Hg2+的最佳去除条件:Hg2+的初始浓度为0.10 mg·L-1、pH为5、ZVI用量为0.050 g、温度为25℃,获得Hg2+的去除率为94.5%.ZVI对废水中Hg2+有一个快速的去除过程,可用准一级反应动力学方程描述,速率常数为0.010 min-1.ZVI去除废水中Hg2+的机制主要是氧化还原反应、铁氧化物和氢氧化物的吸附和共沉淀作用,ZVI表面钝化是降低Hg2+去除率的主要原因,其钝化成分主要是FeOOH和Fe2O3-Fe3O4.胡敏酸可与ZVI还原产生的Fe2+、Fe3+结合形成Fe-HA复合物,增加可溶性铁的比例,缓解ZVI的钝化,对细铁氧化物和铁氢氧化物胶体具有稳定作用,增强对废水中Hg2+的吸附作用.     

Modulation-assisted high speed machining of compacted graphite iron (CGI)

The application of controlled, low-frequency modulation (～100 Hz) superimposed onto the cutting process in the feed-direction – modulation-assisted machining (MAM) – is shown to be quite effective in reducing the wear of cubic boron nitride (CBN) tools when machining compacted graphite iron (CGI) at high machining speeds (>500 m/min). The tool life is at least 20 times greater than in conventional machining. This significant reduction in wear is a consequence of the multiple effects realized by MAM, including periodic disruption of the tool–workpiece contact, formation of discrete chips, enhanced fluid action and lower cutting temperatures. The propensity for thermochemical wear of CBN, the principal wear mode at high speeds in CGI machining, is thus reduced. The tool wear in MAM is also found to be smaller at the higher cutting speeds (730 m/min) tested. The feed-direction MAM appears feasible for implementation in industrial machining applications involving high speeds.     

老挝铁矿资源与成矿预测

经资料整理与实地调研:老挝已发现铁矿床(点)42处。重要矿床为万象省(P.Vientiane)万荣(Vangviang)铁矿、川圹省(P.Xiangkhouang)富诺安(Phou.Nhouan)铁矿、万象省(P.Vientiane)帕莱(Pha Lek)铁矿、甘蒙省(P.Khammouan)班农洛(Ban Nonglao)铁矿。重要矿床的矿体呈似层状、脉状产出,矿石质量较好,矿床属接触交代矿床、热液矿床。据地层条件、岩浆岩条件、构造条件、铁矿床(点)的分布情况,老挝划分出琅勃拉邦(Louangphabang)、孟佩(Muang Pek)、桑怒(Xam-Nua)3个成矿预测区。     

活性炭/纳米零价铁复合吸附剂的制备及对砷的去除应用

纳米零价铁在重金属去除领域应用前景广阔。为了大批量、低成本地制备纳米零价铁,本文采用电化学还原法在粒状活性炭表面电沉积纳米零价铁,通过X射线衍射分析对产物的结构进行了表征,并初步探讨了制备的纳米零价铁/活性炭复合吸附剂对模拟地下水中As(III)的去除效果。结果表明,通过自行设计的电沉积装置,成功地在颗粒活性炭上沉积了纳米零价铁颗粒。制备的活性炭/纳米零价铁复合吸附剂对模拟地下水中As(III)的去除效果良好。电化学沉积法制备纳米零价铁,技术可行,成本低廉,在重金属去除领域具有较大的应用潜力。