湿式石灰石-石膏烟气脱硫系统的工艺控制

通过实践提出湿法脱硫系统运行时工艺参数的优化值,重点讨论了浆液pH、石膏相对过饱和度的控制,以实例说明烟气负荷变化时设备运行方式的改变和参数的调整手段。     

基于Monte Carlo法的城市雨水径流污染负荷模拟

为了评价流域雨水径流对受纳水体的污染程度和为城市雨水管理、受纳水体水质控制及规划提供依据,把以物理过程为基础的模拟特征融入到概率模型中,建立了城市雨水径流污染负荷的概率模型,并用Monte Carlo随机抽样法,对长期的径流污染负荷进行了模拟试验,得出流域径流污染负荷的分布特性及其特征值。以某市一小区的TP负荷为例进行了验证,模拟结果与实测结果较为一致。     

常温下内循环厌氧反应器的启动研究

研究了内循环厌氧反应器(IC反应器)在常温下处理葡萄糖配水的启动特性。结果表明:在运行温度为25~35℃的条件下,反应器经70 d启动完成,且IC反应器具有较好的处理效果,反应器内能形成大量的颗粒污泥。启动完成后,进水COD浓度在3 000 mg/L左右时,COD去除率一直保持在95%以上,出水COD浓度维持在200 mg/L左右。当HRT为5.8 h,容积负荷为11.9 kg/(m3.d)时,出水VFA低于200 mg/L,产气量为33 L/d,反应器运行正常。     

海岛非点源污染负荷估算方法研究

基于流域单元思想,提出一种非点源污染负荷估算方法：借助GIS提取模拟河网,识别流域边界,并划分汇水区和子流域,为流域非点源污染的估算提供基础的数据平台.在此基础上,与土地利用专题图叠加,计算各子流域内不同土地利用类型的面积,构建非点源负荷系统,利用各污染排放系数和入海系数,结合多年的降雨量,并引入坡度因子作为限制条件,估算污染负荷总量.结果显示,南长山岛非点源全氮、全磷年负荷量分别为11539kg和2025kg.氮污染中,各污染源强的贡献率依次为居民生活> 大气沉降> 土地利用> 畜禽养殖;磷污染中,各污染源强的贡献率依次为居民生活> 土地利用> 大气沉降> 畜禽养殖.基于此,探讨海岛地区非点源污染排放特征及对水环境质量影响,可为海岛地区污染物总量调控和环境健康发展提供一种技术方法.     

小城镇产业集群主要污染源筛查与影响分析

以郫县安德镇川菜产业园为研究对象,采用等标污染负荷法对污染影响进行了标准化评价。结果发现:川菜产业园主要的工业污染行业为豆制品加工行业,排污量为2 919.94 t/a,占总排污量的96.46%,等标污染负荷为9.83,占总污染负荷的92.83%,其中有6家企业为主要控制对象。对比分析发现,环境污染受企业规模、末端处理方式、废水排放量等多方面因素共同影响。所有污染因子中,BOD对环境的实质污染影响较大。该研究成果将为优化小城镇产业集群的规划、管理和污染物总量控制提供有价值的参考。     

进水有机负荷对三级生物滴滤池脱氮除磷的影响

试验采用三级(好氧/兼氧/好氧)多层组合填料生物滴滤池处理模拟生活污水,探索强化脱氮除磷工艺。考察了在相同水力负荷和布水周期下,改变进水有机负荷对COD、NH_4~+-N、TN和TP去除率的影响,并用扫描电镜和X射线衍射(XRD)对填料进行辅助分析。研究结果表明,三级串联生物滴滤池的组合相比传统的单级或两级生物滴滤池反应器处理效果更好。第1级和第2级生物滴滤池去除COD、NH_4~+-N和TN效果较好,贡献率合计分别为93.0%、91.2%和91.4%。第1级和第3级生物滴滤池除磷效果较好,贡献率合计91.4%。有机负荷为0.328~0.392 kg/(m~3·d)时,系统总体去除效果最好。     

Sensitivity evaluation of the visual,tactile, and auditory detection response task method while driving

Objectives: In this article, we evaluate the sensitivity to cognitive load of 3 versions of the Detection Response Task method (DRT), proposed in ISO Draft Standard DIS-17488.

Methods: We present a user study with 30 participants in which we compared the sensitivity to cognitive load of visual, audio, and tactile DRT in a simulated driving environment. The amount of cognitive load was manipulated with secondary n-back tasks at 2 levels of difficulty (0-back and 1-back). We also explored whether the DRT method is least sensitive to cognitive load when the stimuli and secondary task are of the same modality. For this purpose, we used 3 forms to present the n-back task stimuli: visual, audio, and tactile. Responses to the task were always vocal. The experiment was based on a between-subject design (the DRT modalities) with 2 levels of within-subject design study (modalities and difficulty of the secondary n-back tasks). The participants' primary task in the study was to drive safely, and a second priority was to answer to DRT stimuli and perform secondary tasks.

Results: The results indicate that all 3 versions of the DRT tested were sensitive to detecting the difference in cognitive load between the reference driving period and driving and engaging in the secondary tasks. Only the visual DRT discriminated between the 0-back and 1-back conditions on mean response time. Contrary to expectations, no interaction was observed between DRT modality and the stimuli modality used for presentation of the secondary tasks.

Conclusions: None of the 3 methods of presenting DRT stimuli showed a consistent advantage in sensitivity in differentiating multiple levels of cognitive load if all response times, hit rates, and secondary task performance are considered. If only response time is considered, the visual presentation of the DRT stimulus used in this study showed some advantages. In interpreting these data, it should be noted that the methods of DRT stimulus presentation varied somewhat from the currently proposed draft ISO standard and it is possible that the relative salience level of the visual DRT stimulus influenced the findings. It is further suggested that more than 2 levels of difficulty of the n-back task should be considered for further investigation of the relative sensitivity of different DRT stimuli modalities. Parameters that indicate change in cognitive load (response time, hit rate, task performance) should be analyzed together in assessing the overall impact on the driver and not individually, in order to obtain a fuller insight of the assessed cognitive load.     

山丘地形下近浅埋煤层综采面静动载叠加的矿压显现特征研究

针对近浅埋综采面过山丘地形发生强矿压显现的问题,采用现场监测、理论分析与数值模拟相结合的方法,建立山丘静载应力传递模型和不同岩层赋存特征的沙土型与土石型山丘工作面关键块体结构力学模型,分析山丘地形工作面矿压发生机理。研究表明:山丘静载向工作面传递的垂直应力呈钟形分布,山丘高静载应力易激发弱铰接结构失稳;山丘坡体中关键层的有无导致了土石型和沙土型山丘工作面矿压发生机理的差异性;坡体断裂块的倾斜回转运动是沙土型山丘工作面发生强矿压的主导因素,断裂块不同的倾斜回转方向导致工作面在上坡段矿压显现缓和而下坡段显现剧烈;土石型山丘工作面的矿压显现主要受坡体中关键块体结构稳定状态的控制,工作面在上坡初和坡顶段动载矿压强烈而下坡段后期较缓和。数值计算结果与现场监测和理论分析相符。     

基于FLAC3D的复合煤岩受载破裂数值模拟及试验研究

采用FLAC~(3D)对复合煤岩模型的单轴压缩破裂进行数值模拟及试验,研究复合煤岩受载破裂应力与应变关系变化规律。针对煤样厚度、复合煤岩组合比、煤层参数、顶底板岩性等参数,对复合煤岩模型进行加载仿真研究,仿真及试验结果表明:单一煤样模型随着高度的减小,应力应变曲线整体阶段存在尺寸效应;改变煤岩组合比例时,其抗压强度基本不变,随煤样比例增大,复合煤岩的整体弹性模量减小,整体刚度减小;单一改变复合煤岩的煤样参数时,随煤样弹性模量增大,复合煤岩的弹性模量越强,应力应变曲线峰值点越高,对应应变越小;单一改变顶底板岩性,对复合煤岩模型的应力应变曲线影响不大。试验结果和仿真结果变化趋势一致,表明所建模型具有一定正确性和适用性。     

有关斜管沉淀池的上升流速讨论

文章从理论上了分析斜管沉淀池上升流速对沉淀池处理效果的影响,及原水特性与斜管沉淀池上升流速取值的关系。讨论分析斜管沉淀池设计时,应根据原水特性不同选择不同的斜管沉淀池上升流速。