The potential of vehicle and road infrastructure interventions in fatal bicyclist accidents on Swedish roads—What can in-depth studies tell us?

Abstract

Objective: The objective of this article is to describe the characteristics of fatal crashes with bicyclists on Swedish roads in rural and urban areas and to investigate the potential of bicycle helmets and different vehicle and road infrastructure interventions to prevent them. The study has a comprehensive approach to provide road authorities and vehicle manufacturers with recommendations for future priorities.

Methods: The Swedish Transport Administration’s (STA) in-depth database of fatal crashes was used for case-by-case analysis of fatal cycling accidents (2006–2016) on rural (n?=?82) and urban (n?=?102) roads. The database consists of information from the police, medical journals, autopsy reports, accident analyses performed by STA, and witness statements. The potential of helmet use and various vehicle and road infrastructure safety interventions was determined retrospectively for each case by analyzing the chain of events leading to the fatality. The potential of vehicle safety countermeasures was analyzed based on prognoses on their implementation rates in the Swedish vehicle fleet.

Results: The most common accident scenario on rural roads was that the bicyclist was struck while cycling along the side of the road. On urban roads, the majority of accidents occurred in intersections. Most accidents involved a passenger car, but heavy trucks were also common, especially in urban areas. Most accidents occurred in daylight conditions (73%). Almost half (46%) of nonhelmeted bicyclists would have survived with a helmet. It was assessed that nearly 60% of the fatal accidents could be addressed by advanced vehicle safety technologies, especially autonomous emergency braking with the ability to detect bicyclists. With regard to interventions in the road infrastructure, separated paths for bicyclists and bicycle crossings with speed calming measures were found to have the greatest safety potential. Results indicated that 91% of fatally injured bicyclists could potentially be saved with known techniques. However, it will take a long time for such technologies to be widespread.

Conclusions: The majority of fatally injured bicyclists studied could potentially be saved with known techniques. A speedy implementation of important vehicle safety systems is recommended. A fast introduction of effective interventions in the road infrastructure is also necessary, preferably with a plan for prioritization.     

Selection of failure frequency and its impact on risk assessment – A case study from plot plan optimisation

Facility Siting is an important phase of project development. A critical stage is plot plan optimisation, where significant potential hazards are eliminated due to equipment spacing. In addition to ensuring appropriate compliance with minimum spacing requirements, occupied building studies to achieve compliance with the requirements of API 752 and API 753 could also be undertaken to optimise safety outcomes. The studies are done in three stages, where the first stage is hazard identification, second stage is consequence assessment and the third stage is risk assessment. Third stage assessments are only carried, if the consequence based siting recommendations are not practical to implement.This paper presents the challenges in estimating risk due to process hazards with a focus on selecting right event likelihood data. A comparison is presented on the variation in predicted risk levels based on equipment failure rates and leak frequencies.Case study of a plot plan optimisation study is undertaken with DNVGL Phast Risk and the variation in risk levels up to two orders of magnitude are recorded. Challenges such as adaption of data for local conditions, consistent definitions of failure, sample size of data, applicability of data play a significant role in identifying and correctly quantifying the risk levels. Such challenges and its impact on risk quantification are presented in this paper as well as its impact on facility siting.     

Selection and integration of environmental impacts in the Danish transport infrastructure assessment process

Transport projects have numerous consequences for the environment, society and economy, and thus an EU Directive has stated a number of impacts that need to be assessed prior to any major intervention. This paper is set in a Danish context where the EU requirements have been adopted in the Environmental Impact Assessment (EIA) regulation along with national requirements. In recent years, however, the EIAs have been criticised for an inconsistent inclusion of impacts and unclear assessment process. A selection of EIAs is for this reason reviewed and compared to the EU Directive and corresponding works in Sweden and the UK to identify potential opportunities for improvements. From the literature study, an overview table with all potential relevant impacts for transport projects is set up to assist the EIA process. For the sake of simplicity and transparency, the impacts selected from this table should, however, be further reduced in number to ensure that only the most important impacts are included in the process. To further increase simplicity and transparency in the EIA process, a novel framework for assessing different types of impacts is proposed. In this framework, a comprehensive decision support tool involving stakeholders is in focus. The framework is supplemented with a procedure for generating objectives and presenting results in an appropriate way to the many stakeholders involved. The impacts overview table and the assessment techniques are applied to a case study to illustrate the process, and finally, conclusions and perspectives for future work within the field are set out.     

A hybrid decision-making approach based on FCM and MOORA for occupational health and safety risk analysis

IntroductionWith the development of industries and increased diversity of their associated hazards, the importance of identifying these hazards and controlling the Occupational Health and Safety (OHS) risks has also dramatically augmented. Currently, there is a serious need for a risk management system to identify and prioritize risks with the aim of providing corrective/preventive measures to minimize the negative consequences of OHS risks. In fact, this system can help the protection of employees’ health and reduction of organizational costs. Method: The present study proposes a hybrid decision-making approach based on the Failure Mode and Effect Analysis (FMEA), Fuzzy Cognitive Map (FCM), and Multi-Objective Optimization on the basis of Ratio Analysis (MOORA) for assessing and prioritizing OHS risks. After identifying the risks and determining the values of the risk assessment criteria via the FMEA technique, the attempt is made to determine the weights of criteria based on their causal relationships through FCM and the hybrid learning algorithm. Then, the risk prioritization is carried out using the MOORA method based on the decision matrix (the output of the FMEA) and the weights of the criteria (the output of the FCM). Results: The results from the implementation of the proposed approach in a manufacturing company reveal that the score at issue can overcome some of the drawbacks of the traditional Risk Priority Number (RPN) in the conventional FMEA, including lack of assignment the different relative importance to the assessment criteria, inability to take into account other important management criteria, lack of consideration of causal relationships among criteria, and high dependence of the prioritization on the experts’ opinions, which finally provides a full and distinct risk prioritization.     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

Investigation of multiple domino scenarios caused by fragments

A model of multiple domino scenarios and the risk of the domino effect, which is a sequential chain escalating from the primary unit to the last unit, is presented in this paper. The trajectories of fragments from all units, the ground distribution of projectiles, and the risk of the sequential chain of the domino effect were calculated using Monte Carlo simulations. The results showed that the range affected by the fragments from each tank included the other tanks, meaning that fragments from one tank could hit the other tanks and cause multiple accidents, and that the sequential chain of the domino effect could indeed happen. The distributions of ground impacts showed that tank fragments were projected over long distances, up to 1200 m from the source. The spatial distribution of the kinetic energy at ground impact for tank fragments was also obtained. Moreover, the magnitudes of the probabilities of the primary, secondary, third, and fourth accidents in the domino chain were respectively about 10⁻⁷, 10⁻¹¹, 10⁻¹⁵, and 10⁻¹⁹. These results showed that for neighboring domino effect units in the same accident chain, the risk of the most recent domino effect was 10⁴ times that of the following domino effect.     

城市电力供应系统公共安全风险评估体系及应用

城市电力供应系统与城市公共安全关系紧密，文章分析了导致城市电力供应系统故障或事故的主要风险因素、事故类型及其风险程度，建立了城市电力供应系统公共安全风险评估体系。利用建立的风险评估体系，对某市电力供应系统的安全性进行了风险评估，同时验证了该体系在城市电力供应系统风险评估中的良好适用性。     

Review of LCA studies of solid waste management systems – Part I: Lessons learned and perspectives

The continuously increasing solid waste generation worldwide calls for management strategies that integrate concerns for environmental sustainability. By quantifying environmental impacts of systems, life cycle assessment (LCA) is a tool, which can contribute to answer that call. But how, where and to which extent has it been applied to solid waste management systems (SWMSs) until now, and which lessons can be learnt from the findings of these LCA applications? To address these questions, we performed a critical review of 222 published LCA studies of SWMS. We first analysed the geographic distribution and found that the published studies have primarily been concentrated in Europe with little application in developing countries. In terms of technological coverage, they have largely overlooked application of LCA to waste prevention activities and to relevant waste types apart from household waste, e.g. construction and demolition waste. Waste management practitioners are thus encouraged to abridge these gaps in future applications of LCA. In addition to this contextual analysis, we also evaluated the findings of selected studies of good quality and found that there is little agreement in the conclusions among them. The strong dependence of each SWMS on local conditions, such as waste composition or energy system, prevents a meaningful generalisation of the LCA results as we find it in the waste hierarchy. We therefore recommend stakeholders in solid waste management to regard LCA as a tool, which, by its ability of capturing the local specific conditions in the modelling of environmental impacts and benefits of a SWMS, allows identifying critical problems and proposing improvement options adapted to the local specificities.     

Fuzzy experts on recreational vessels, a risk modelling approach for marine invasions

Understanding risks from the human-mediated spread of non-indigenous species (NIS) is a critical component of marine biosecurity management programmes. Recreational boating is well-recognised as a NIS pathway, especially at a regional scale. Assessment of risks from this pathway is therefore desirable for coastal environments where recreational boating occurs. However, formal or quantitative risk assessment for the recreational vessel pathway is often hampered by lack of data, hence often relies on expert opinion. The use of expert opinion itself is sometimes limited by its inherent vagueness, which can be an important source of uncertainty that reduces the validity and applicability of the assessment. Fuzzy logic, specifically interval type-2 fuzzy logic, is able to model and propagate this type of uncertainty, and is a useful technique in risk assessment where expert opinion is relied upon. The present paper describes the implementation of a NIS fuzzy expert system (FES) for assessing the risk of invasion in marine environments via recreational vessels. The FES was based on expert opinion gathered through systematic elicitation exercises, designed to acknowledge important uncertainty sources (e.g., underspecificity and ambiguity). The FES, using interval type-2 fuzzy logic, calculated an invasion risk value (integrating NIS infection and detection probabilities) for a range of invasion scenarios. These scenarios were defined by all possible combinations of two vessel types (moored and trailered), five vessel components (hull, deck, internal spaces, anchor, fishing gear), two infection modes (fouling, water/sediment retention) and six frequently visited marine habitats (marina, mooring, farm, ramp, wharf, anchorage). Although invasion risk values determined using the FES approach was scenario-specific, general patterns were identified. Moored vessels consistently showed higher invasion risk values than trailered vessels. Invasion risk values were higher for anchorages, moorings and wharves. Similarly, hull-fouling was revealed as the highest infection risk mode after pooling results across all habitats. The NIS fuzzy expert system presented here appears as a valuable prioritising and decision-making tool for NIS research, prevention and control activities. Its easy implementation and wide applicability should encourage the development and application of this type of system as an integral part of biosecurity, and other environmental management plans.     

驾驶员风险认知能力对交通安全的影响

为辨别不同驾驶员风险认知能力对驾驶安全的影响。通过设置13种存在潜在风险的交通情景,引入惩罚用时机制,利用驾驶模拟器,对熟练驾驶员和非熟练驾驶员在风险认知培训前后的风险认知能力进行比较,找出不同驾驶员对风险认知的差异。试验结果显示,熟练驾驶员的风险认知能力比非熟练驾驶员要高,两者在引起交通风险的因素上是不同的,培训后的风险认知能力较之前有很大提高。培训能够拓宽驾驶员对潜在风险的认知程度,更好地将驾驶员的操作技能、知识体系和外在行为衔接在一起,从而减少交通事故的发生。