长江三峡水库气候效应数值模拟

在地形坐标系中建立了一个三维静力平衡的大气-土壤耦合模式,模式详细考虑了复杂地形、植被和水面的热力、动力过程。与其它中、小尺度模式相比其独特之处是：此模式在地表与植被冠层建立的辐射平衡方程和能量平衡方程中,均详细地考虑了坡度、坡向的影响。观测表明,长江三峡江面水温的日变化小于3℃。长江三峡段水流湍急,江水上下交换十分剧烈,各处水深变化较大,使模拟江水的动力、热力过程变得十分困难。所以,在研究中忽略了江水温度的日变化,模式中作为动力、热力外强迫因子,水库建成后的改变仅为水面海拔高度的升高和水面区域的扩大,水面温度是常数。用此模式模拟研究长江三峡建成前后气象要素场的日变化过程,通过计算它们的差别来分析水库的小气候效应。结果表明风、温、湿气象要素场在方圆近10 km范围内均有不同程度的改变,但变化幅度不大。     

MR阻尼器的简化参数模型及其应用

MR阻尼器应用于控制风振、地震等引起的随机振动时需用参数化表达式来描述MR阻尼器简化的力学模型 ,从而更好地揭示MR阻尼器的减振机理。本文采用偏最小二乘法误差估计、Chebyshev多项式拟合建立了MR阻尼器简化模型的参数化表达式 ,并应用于斜拉索振动控制中 ,为合理选择MR阻尼器提供了便捷、可靠的手段     

金岭铁矿加强安全管理的措施与经验

山东金岭铁矿通过建立科学合理的安全管理模式,开创了安全生产的新局面,连续3年实现安全生产,社会和经济效益显著。     

多泥沙河流水质模型研究

针对黄河泥沙含量大、泥沙对河流CODMn浓度影响大的突出特点,运用模拟实验方法,探讨了泥沙对CODMn浓度的影响,揭示了浑水、清水中CODMn浓度与含沙量间的关系.研究表明,黄河浑水中CODMn浓度随含沙量增大呈显著上升趋势,而去除泥沙后清水CODMn浓度测定值随其原含沙量增大呈微上升趋势.依据质量平衡原理,建立了充分考虑泥沙影响的CODMn衰减经验模型.清水中CODMn浓度的变化采用完全混合反应器概念来模拟,浑水中CODMn浓度通过清水中CODMn浓度与泥沙中CODMn浓度之和来量化.模型基本方程的求解采用稳态解析解.模型中的参数通过利用实际监测数据及室内实验结果与优化结合的方法确定.同时,利用实际监测数据对参数和模型进行检验.结果表明,模型结构合理,参数取值可靠,模型精度较好.模型既能揭示汇流区间人为污染对河段水质的影响,又可以反映作为面污染源的黄河泥沙对污染的影响,可作为水质预测的实用工具及规划管理的依据.     

信息量模型在地质灾害调查与区划中的应用研究

以浙江省仙居县地质灾害调查与区划项目为例,在分析当地实际地质情况的基础上结合信息论原理,对仙居县进行了基于多因素分析的地质灾害预测区划。经分析计算．得出的区划结果基本符合仙居县的实际情况。故用信息量模型进行地质灾害区划是可行的。     

个人因素事故致因模型的探讨

从个人因素事故致因模型出发．探讨了潜在危险存在的情况下．个人因素与事故发生之间的联系;分析了不同的个人因素对于潜在危险的感知认识的作用和影响以及由此而决定的工作行为的安全程度;讨论了以控制导致事故发生的个人因素为出发点．用以预防事故发生的对策措施;提出在现代安全科学领域中,不仅要解决职工安全生产技术方面的问题．更要强调职工个人的社会性,在工作之中的成就感,被尊重的程度．这样才能达到充分激励职工、加强安全生产的目的。     

生态示范区建设的模式及其实践的几点思考

就生态示范区建设的重要性、生态示范区建设模式进行探讨,分析了生态示范区建设模式的成功范例,最后提出创建生态示范区的建议。     

Developing and validating a scientific model for exploring safe work practices in interdisciplinary teams

Health research literature on quality and safety in recent years has pointed to a need to explore the characteristics of interdisciplinary team work unique to the health care sector and the particular organization. The literature also has identified a need for scientific models that explore and integrate existing findings concerning team dynamics. In this article, I attempt to address these concerns by developing and validating a scientific model for exploring safe work practices of interdisciplinary OR teams. Specifically, existing health research literature on quality and safety is reviewed to identify and incorporate various team-related aspects into dimensions of the proposed model. To further validate the model, I conduct an ethnographic study of safe work practices within an interdisciplinary OR setting. I find that safe work practices can be viewed as a product of the individual’s and team’s ability to draw on and combine explicit and tacit knowledge repertoires, which again is a product of the particular inner and outer structural conditions of a system. While the findings add their own unique distinctiveness to the scientific model, the findings also compare to the existing aspects and dimensions of the model. I conclude that the fit of the empirical data to the model improves the validity of the model, and also the potential application of the model in ethnographic research within different medical and/or team settings.     

Assessing safety culture in the Spanish nuclear industry through the use of working groups

This paper presents the design and the implementation of a methodology for measuring and improving safety culture at a nuclear power plant (NPP). The study has involved the completion of a pilot project aimed at seeing how to make use of the RADAR logic (Results, Approach, Deployment, Assessment and Review) of the EFQM model as a tool for the self assessment of safety culture in a nuclear power plant. The work was aimed at finding evidence of the safety culture that was in place at the plant and at identifying both the strengths of that culture and any areas in which it could be improved. The score obtained from an analysis of those strengths and areas for improvement has made it possible to prioritise the actions to be taken. The identification of perceptions and evidence, the agreement on the strong points and areas for improvement and the quantification of the safety culture have been performed by groups comprising volunteers who work at the NPP. The advantages of this methodology are assessed in the paper.     

电絮凝技术处理洗车废水试验

采用电絮凝技术处理洗车废水,以保证处理后出水能够循环利用。考察电流密度、初始pH值、NaCl浓度及电解时间等操作因素对COD与浊度去除效果的影响。结果表明,在最佳处理条件下,出水达到生活杂用水水质标准;另外,去除COD过程符合一级动力学模型,去除单位浓度COD产生4.02×10-3kg湿污泥、3.10×10-4kg干污泥。