基于大涡模拟的旋风分离器内流场数值模拟研究

为了研究旋风分离器内流场的运动状况,借助Fluent软件,采用大涡模拟,基于曲线坐标系的SIMPLEC算法,对切向入口的Stairmand旋风分离器内流场进行了三维数值模拟研究。数值结果表明,大涡模拟适合于三维强旋流的流场模拟,分离器内部的流动空间可分为内、外2个流动区域,在不同的流动区域中,气体压力、速度场的分布有较大的差异。而且压力分布与速度分布不是绝对的轴对称分布。数值模拟结果对其设计优化研究有一定的应用价值。     

大型梯级水库对河流生态流量的影响——以金沙江下游梯级为例

大型梯级水库通常具有较大的调节库容,水库运行使坝下河道自然的流量过程受到较大扰动,一些具有重要生态意义的流量组的特征被改变,如洪水、高流量脉动、低流量和极端低流量。基于BRAIN等提出的河流生态流量影响研究理论,结合金沙江屏山断面的水文与河流生态的关系,选取水平年组对高流量脉动和极端低流量组的判别参数进行率定,确定自然条件下屏山断面生态流量组指标值。模拟金沙江下游梯级建成后的逐日流量过程,求得各生态流量组指标值并与自然条件下的指标值进行对比,分析金沙江下游“乌东德-白鹤滩-溪洛渡-向家坝”梯级水库建成后可能对屏山断面生态流量过程的影响。研究结果表明：建库后屏山断面将可能出现“极端低流量消失、低流量提高、高流量脉动散化、洪水基本保持”的变化特点.     

旅游发展价值取向与制度变革：美国国家公园体系的启示

通过对旅游发展的价值取向与管理体制分析发现,美国国家公园体系让国民享受到保护较好的遗产资源和舒适生态的游憩环境,国家公园提供的国民精神教育与实在的公益性服务提高了国民的凝聚力。相比而言,我国国家级保护区体系缺乏统一协调的发展理念、管理部门职能交叉、法律基础薄弱、管理及维护经费无稳定保障、公共服务意识缺失。因而,我国必须改变保护区内以经济利益为核心的旅游发展价值取向,建议对现有制度作如下调整：严格规范准入机制,重新梳理国家级保护区名录;完善现有立法,切实保护各类具有国家意义的遗产资源;逐步推进大部门体制改革,形成统一化管理的国家级保护区体系;启动淘汰机制限制保护区的数量扩张,将中央财政集中到确需保护的保护地;推出原住民资助计划,推进文化保护与社会公平;提高保护区体系从业人员素质,为各保护区建立具有科学性和教育性的解说系统,发挥国家级保护区体系对国民精神教育的重大作用.     

化工园区应急管理模式研究

在化工园区特点和危险性分析的基础上,建立"风险防控、应急队伍、应急平台、应急组织、应急预案、运行机制"的化工园区应急管理模式;探讨加强化工园区应急管理的对策措施;提出以重大危险源普查与监控、区域风险评价和安全规划为重点,构建风险防控与管理体系;增强包括公安消防特勤队、特种工程抢险队、医疗救护队在内的化工园区应急救援队伍的处置能力;依托园区现行管理体制完善应急组织体制及其运行机制;完善化工园区应急预案体系等。     

化工园区安全风险容量探讨

探讨并提出化工园区安全风险容量的内涵,从量化风险的角度论述区域安全风险容量;以个人风险、社会风险和潜在生命损失值作为化工园区风险容量分析的指标,并给出风险计算的模型和风险标准;对园区内企业生产规模、运输量与安全风险容量的关系进行讨论,认为企业生产规模的扩大可能不增加固定危险源的风险,但直接增加运输风险;给出了化工园区的现状及规划新建项目的安全容量的具体确定程序;以某化工园区为应用实例对安全风险容量进行分析和说明。     

单跑楼梯井内火灾过程的数值模拟

针对单跑楼梯井内的火灾过程,采用大涡模拟方法,通过改变单跑楼梯井顶层门的面积,探讨了门面积的改变对楼梯井内火灾过程中空气卷吸量、排烟量、楼梯井内平均氧气浓度以及楼梯井内外压差的影响,分析了火灾烟气流动的动力学特征。研究结果表明,随着单跑楼梯井门开口面积的增加,空气卷吸量和排烟量均增加,井内平均氧气浓度增加而井内外压差逐渐降低。计算结果显示,在火灾场景中,当单跑楼梯井顶层门面积较小时,以上物理量对门高度的变化更为敏感。     

Measurement Diagnostics by Analysis of Last Digits

Though measurement instruments and methods have their natural precision limits, long term monitoring, which is so importantfor environmental studies, requires to set up and maintaincertain standards regarding precision. The elementaryrequirement is to produce measurements with a prescribed numberof valid digits. If the technology further develops and allowsto increase the number of valid digits, the change should bedocumented. In this paper we discuss a simple procedure for validity assessment of the last digits of data in a data base.It may be useful for both calibration control of an instrumentas well as for preliminary data analysis in scientific studies.The procedure utilizes the assumption that, under normalconditions, the last digits of the observed data can usually beconsidered as uniformly distributed random numbers. Failures ordeliberate changes in the observation mechanism can be detectedif particular digits occur more frequently than the others. Thedecision about proper representations of the last digits is doneby means of the familiar chi-square statistics.     

Three-Dimensional Modeling of an Urban Park and Trees by Combined Airborne and Portable On-Ground Scanning LIDAR Remote Sensing

In this study, we confirmed the utility of airborne and portable on-ground scanning light detection and ranging (LIDARs) for three-dimensional visualization of an urban park and quantification of biophysical variables of trees in the park. The digital canopy height model (DCHM) and digital terrain model generated from airborne scanning LIDAR data provided precise images of the ground surface and individual tree canopies. The heights of 166 coniferous and broadleaf trees of 11 species in the park were estimated from the DCHM images with slight underestimation (mean error = −0.14 m, RMSE = 0.30 m). Portable on-ground scanning LIDAR provided images of individual trees with detailed features. Tree height and trunk diameter were estimated to be within 0.31 m and 1 cm, respectively, from the on-ground LIDAR images. We combined airborne and on-ground LIDAR images to overcome blind regions and created a complete three-dimensional model of three standing trees. The model allowed not only visual assessment from all viewpoints but also quantitative estimation of canopy volume, trunk volume, and canopy cross-sectional area.     

全新型生态工业园区的工业共生链网结构研究--新疆石河子国家生态工业(造纸)园区的设计分析

本文以新疆石河子国家生态工业(造纸)园区的设计为例．运用产业生态学理论，深入系统地分析了生态工业园区的系统构成、工业共生关系以及生态工业链网结构．为全新型生态工业园区的设计及其运行提出了切实可行的建议。     

Adaptation of Nitraria sphaerocarpa to wind-blown sand environments at the edge of a desert oasis

This study addresses the adaptation of Nitraria sphaervcarpa to blown sand at the edge of a desert oasis with regard to the aspects of soil seed banks, seedlings, and population. Horizontally, the total number of seeds per unit area decreased from the shrub canopy center to intershrub areas, and most seeds were found under shrub canopies. Vertically, the highest proportion of seeds was found at depths of 5-10 cm. The emergence percentage, seedling mass, and seedling height, which were significantly affected by both burial depth and seed size, were highest at the optimal burial depth of 2 cm, and decreased with increasing burial depth in each seed size-class. Although seedling mass was usually greatest for large seeds and least for small seeds at each burial depth, little difference was observed in seedling height at shallow burial depths of 0-3 cm. The population shows a patchy and discontinuous distribution pattern. Population height increases with increasing sand depth. Also the density increases with increasing depth of sand in the desert; however, there is a steady decrease when the depth of sand is more than 100 cm. This result indicates that the depth of sand that is most suitable for the growth of Nitraria sphaervcarpa is 100 cm. The size of the population is significantly correlated with the sand depth, which increases with increasing depth in the desert.