用差示分光光度法测定高浓度皮革废水中铬的方法探讨

介绍了应用差示分光光度法直接测定高浓度皮革废水中Cr的方法，通过与原实验方法分析结果的对比，获得了满意的结果，能基本满足环境监测的要求。     

对火电厂烟气脱硫设计总平面布置的探讨

火电厂烟气脱硫工程往往是在场地或其他条件受到诸多限制的情况下进行的，设计中总平面布置的作用显得尤其突出。以几个电厂脱硫工程的设计为例，探讨如何充分利用已有务件，协调脱硫与整个厂区总平面布置的关系，以使设计合理，经济。     

基于模糊模式识别的模糊综合评价在高层建筑火灾危险评价中的应用

针对高层建筑火灾危险的特点,建立了高层建筑火灾危险评价的指标体系,并应用层次分析法确定了其权重。根据高层建筑火灾危险评价系统具有多因素、多层次的特点,采用模糊综合评价方法;针对模糊综合评价的不足之处,提出把权广义距离之和最小模糊模式识别运用到模糊综合评价当中,建立了基于模糊模式识别的模糊综合评价模型;该评价模型避免了单因素矩阵的确定和模糊算子的选择问题,用安全状态特征值来表征最终的评价结果,能使评价结果更加准确,可操作性强。通过对陕西某高层建筑火灾危险评价实例证明,该模型具有较好的应用价值,为日常的安全管理和性能化防火设计提供了有用依据。     

利用高温废气治理焦化酚氰污水项目实践

阐述了利用焦炉、窑炉、电厂等高温废气处理焦化污水的理论及工业实践,该工艺具有投资省、运行费用低的突出优点.     

气浮+生物接触氧化工艺处理食品加工废水

通过气浮 生物接触氧化工艺处理速冻食品加工废水的实验、设计和工程运行,结果表明:废水COD去除率能达到97%以上,使得最终出水的COD＜100mg/l.该工艺对冲击负荷有较强的适应性.     

ACCURACY OF LAKE AND STREAM TEMPERATURES ESTIMATED FROM THERMAL INFRARED IMAGES1

Emitted thermal infrared radiation (TIR, λ= 8 to 14 μm) can be used to measure surface water temperatures (top approximately 100 μm). This study evaluates the accuracy of stream (50 to 500 m wide) and lake (300 to 5,000 m wide) radiant temperatures (15 to 22°C) derived from airborne (MASTER, 5 to 15 m) and satellite (ASTER 90 m, Landsat ETM+ 60 m) TIR images. Applied atmospheric compensations changed water temperatures by ?0.2 to +2.0°C. Atmospheric compensation depended primarily on atmospheric water vapor and temperature, sensor viewing geometry, and water temperature. Agreement between multiple TIR bands (MASTER ‐ 10 bands, ASTER ‐ 5 bands) provided an independent check on recovered temperatures. Compensations improved agreement between image and in situ surface temperatures (from 2.0 to 1.1°C average deviation); however, compensations did not improve agreement between river image temperatures and loggers installed at the stream bed (from 0.6 to 1.6°C average deviation). Analysis of field temperatures suggests that vertical thermal stratification may have caused a systematic difference between instream gage temperatures and corrected image temperatures. As a result, agreement between image temperatures and instream temperatures did not imply that accurate TIR temperatures were recovered. Based on these analyses, practical accuracies for corrected TIR lake and stream surface temperatures are around 1°C.     

页岩气加砂压裂高压管汇失效爆裂风险 控制措施研究与实践

随着页岩气平台井工厂化压裂施工启动,在大排量、高压力、长时间施工条件下,高压管汇失效爆裂大幅增加。为减少高压管汇在压裂过程中失效爆裂风险,运用故障假设、因果分析法从人的因素、物的因素、技术工艺、生产管理、工作环境5个方面分析事故的原因,提出了提升采购产品质量、修订完善高压管汇使用技术规范和管理制度、实施专业化管理、应用大数据管理高压管汇、优化现场地面高压管汇流程分配布局设计与联接工艺等高压管汇失效爆裂风险预防控制措施和失效后应急安全防护措施,建立了生命周期全过程、专业化的高压管汇失效爆裂防控与应急防护体系,实现风险可防受控。为页岩气压裂作业的安全提供了参考。     

Societal implications of sustainable energy action plans: from energy modelling to stakeholder learning

This article investigates the potential impact of sustainable energy action plans (SEAPs) on local development through a two-step methodology involving participatory planning and quantitative analysis. The first phase relies on a participatory system mapping (PSM) approach and generates a causal structure at the basis of the urban model. In the second phase, we transform the qualitative map into a system dynamic model which evaluates the effect of the SEAP on social, economic and environmental indicators. This methodology was applied to the case of Cascina Municipality (Italy). Through scenario analysis, we show that some indirect feedback can harm the achievement of the 20% emission reduction target. This process allows the local authority and stakeholders to evaluate the impact of emission reduction policies on CO₂ emissions and local development, thereby generating collective learning on the systemic implications of the plan. We show that this method can enhance the ambition of emission mitigation efforts by small towns.     

Effects of particle thermal characteristics on flame microstructures during dust explosions of three long-chain monobasic alcohols in a half-closed chamber

To reveal clearly the effects of particle thermal characteristics on flame microstructures during organic dust explosions, three long-chain monobasic alcohols, solid at room temperature and similar in physical-chemical properties, were chosen to conduct experiments in a half-closed chamber. In the experiments, the dust materials were dispersed into the chamber by air to form dust clouds and the hybrids were ignited by an electrical spark. A high-speed optical schlieren system was used to record the flame propagation behaviors. A fine thermocouple and an ion current probe were respectively used to measure the flame temperature profile and the reaction behaviors of the combustion zone. Based on the experimental results, combustion behaviors and flame microstructures in dust clouds with different thermal characteristics were analyzed in detail. As a result, it was found that the dust flame surfaces were completely covered by cellular structures that significantly increased the flame frontal areas. Flame propagated more quickly and the number of the cellular cells increased as increasing the volatility of the particles. On the contrary, maximum temperature and the thickness of the preheated zone decreased as increasing the volatility of the particles. According to the ion current profile, the particles in the preheat zone were pyrolyzed to intermediate radicals and the radicals' fraction in the higher volatile dust flame was higher than that in the lower volatile dust flame.