利用粉煤灰处理含碱污水的试验研究

为了探讨火电厂除灰水中的粉煤灰（含炉渣）对炼油厂含碱污水中石油类、ＣＯＤ(ｃｒ)等污染物的吸附处理效果,根据某单位现场情况,将炼油厂含碱污水送入火电厂除灰沟→经充分混合排入储灰场→并经长时间沉降分离的流程进行模拟试验,结果表明：由于粉煤灰的吸附作用,显著降低了炼油厂含碱污水中的石油类、ＣＯＤ(ｃｒ)、挥发酚、碳化匕物等污染物。     

Influences of Magnesium <Emphasis Type="Italic">tri-</Emphasis>Silicate on the Physical,Mechanical, and Degradable Properties of Ultraviolet (UV) Radiation Cured Plain Board Surface

A series of formulations were prepared with different percentages of oligomer, epoxy diacrylate (EA-1020 ), monomer, 1,6 Hexane diol diacrylate,(HDDA) and different percentages of filler (Magnesium tri-silicate, Mg₂Si₃O₈). Irgacure 369 [2-Benzyl-2-dimethyl-amine-1 (4-morpholinophenyl) butanone-1] was used in the formulations as photoinitiator. Ultraviolet (UV) cured thin polymer films were prepared from these formulating solutions on clean glass plates. Pendulum hardness (PH), gel content and macro scratch hardness (MSH) of the UV cured films were studied. One percent Mg₂Si₃O₈ containing formulation showed the premium properties. The substrates (plain board) were coated by these formulating solutions and cured under the same UV lamp at different intensities of radiation. Various properties of the coated surface such as PH, gloss, adhesion, abrasion and MSH were investigated. The base coat containing 1% Mg₂Si₃O₈ and top coat containing 48% HDDA produced the best performance among all the formulations inspected. The degradable properties in different weathering conditions on PH, gloss, adhesion, abrasion and MSH were measured. The surface cured with the optimized formulation (E) again yielded the minimum loss of the properties.     

Influence of the oxide content on the ignition energies of aluminium powders

Some results of determination of ignition energies for an aluminium powder with various oxide contents are presented. Common use of processes like high-speed cutting produce explosive dust clouds, so that we focused this study on hazard of metallic powders. An industrial aluminium powder has been used for this work. An original process, based on the principle of electrochemical anodisation, has been developed to increase, under control, the oxide coating of particles.

The sensitivity study to spark ignition was performed in an Hartmann explosion tube of 1.3L. The Langlie test method was applied to evaluate the energies leading to a probability of ignition of 50% (E₅₀) of the selected samples. The results confirm that the ignition energies increase with the oxide content of the powder.     

THE USE OF MAGNESIUM CARBONATE IN CHLOROPHYLL DETERMINATIONS1

Abstract: Chlorophyll analyses of both laboratory cultures and natural aquatic samples were unaffected by the use of magnesium carbonate. Equal volumes of the samples (at various pH values) were pipetted onto 0.45 micrometer filters with and without magnesium carbonate. Chlorophyll concentrations were determined for each filtered sample and those frozen for specified times. In all samples tested there was no difference either in the retention of algae or in the stability of chlorophyll over the time period and pH range tested.     

Experimental investigation of the performance of modified expanded graphite powder doped with zinc borate in extinguishing sodium fires

Sodium is the main cooling medium in the circuit of fourth-generation nuclear reactors, and its leakage constitutes a severe fire hazard because of its high chemical activity. In this study, expandable graphite (EG), which is a traditional sodium fire-extinguishing agent, was modified with zinc borate (ZB) as an intercalator, and the modified EG_ZB was characterized. Moreover, the effectiveness of the modified EG_ZB in extinguishing sodium fires was tested using a self-developed fire-extinguishing experimental device. This study's results indicated that EG, EG_ZB had a smaller particle size, higher thermal stability, higher fire-extinguishing speed, and lower powder mass consumption than EG. During the fire-extinguishing process, ZnO decomposed by ZB captured free radicals and inhibited the combustion reaction. Furthermore, B₂O₃ was adsorbed on the surface of the EG layer, which strengthened covering and asphyxiation. The findings of this study provide crucial information for effectively controlling fires caused by active metals and metallo-organic compounds.     

牡蛎壳粉和石灰改良酸性水稻土对磷有效性、形态和酶活性的影响

我国南方粮食主产区土壤酸化治理是提升耕地地力促进粮食增产的重要内容,目的是探究酸化土壤改良剂牡蛎壳粉和石灰对水稻土酸度、磷有效性和形态以及酶活性和相关功能基因的影响.盆栽试验设计2种改良剂的3个施用量（0.05%、0.10%和0.15%）,以水稻为试验作物.结果表明：①牡蛎壳粉和石灰均显著提高土壤pH,降低土壤交换性酸,且改良效果随着改良剂用量增加而提高,相同用量下石灰对土壤酸性的改良效果高于牡蛎壳粉;② 4种有效磷提取剂提取的土壤有效磷测定结果表明,牡蛎壳粉和石灰显著提高H₂SO₄-P、Bray-1 P和Olsen-P含量,其中Olsen-P含量随改良剂用量的增加而提高.③土壤中不同形态无机磷含量表现为：Fe-P>Al-P>Ca-P,石灰和牡蛎壳粉显著提高Al-P和Fe-P含量,分别提高26.3%~37.4%和7.9%~23.7%;0.15%改良剂显著增加Ca-P含量;④石灰和牡蛎壳粉对土壤DHA、ALP、IPP活性和phoD基因拷贝数具有提高作用,而对土壤ACP活性、phoC和pqqC拷贝数表现为降低;⑤改良剂（0.10%和0.15%）显著提高水稻产量,0.15%用量的石灰和牡蛎壳粉分别提高水稻产量34.2%和46.8%,但对秸秆生物量无显著影响.相关分析表明,土壤无机磷和有效磷含量与pH和ALP活性呈显著正相关,改良剂通过消除土壤酸化和提高土壤磷酸酶活性来改善土壤磷营养状况,这对促进作物产量具有积极作用.     

用碳化法从制碱废渣一次盐泥中制取轻质氧化镁的研究

本研究是用制碱废渣一次盐泥作原料，采用二氧化碳碳化法制取轻质氧化镁。同时分析了提取轻质氧化镁后的残渣用于制造水泥或其它胶凝材料的原料的可行性。     

超疏水表面在提高镁合金耐蚀性能上的研究进展

总结和讨论了超疏水表面提高镁合金耐蚀性能的制备方法。采用电化学测试方法研究了超疏水表面的抗腐蚀行为。总结了在镁合金上制备抗腐蚀性超疏水表面的最新进展,提出了超疏水表面提高镁合金耐蚀性能的机理。镁合金上制备超疏水表面的方法较多,但是能进行大规模生产的较少,且制备的超疏水表面耐久性、机械稳定性较差。     

温度对镁合金牺牲阳极材料电化学行为的影响研究

目的研究温度对常用镁合金阳极材料MIC、AZ31、AZ63电化学行为的影响。方法根据GB/T 17848—1999,采用四天加速试验法,在25～70℃的人造海水介质中进行阳极电化学性能评价,并观察腐蚀后阳极的宏观腐蚀形貌。采用极化曲线测试技术,研究温度对加速试验前后阳极的极化行为影响。结果随着温度的升高,三种镁阳极的局部腐蚀明显加剧,溶解状态逐渐变得不均匀。随着温度的上升,三种镁阳极的实际电容量和电流效率呈小幅增加趋势,温度的影响不显著。极化曲线显示,镁阳极表现出活化溶解特征,温度升高明显促进了镁阳极的阴极过程,自腐蚀速率逐渐增加。结论在腐蚀初期,温度升高明显促进了镁合金阳极的腐蚀过程,但对镁阳极的电化学性能影响不显著,这可能与后期腐蚀产物生成以及表面状态的变化有关。     

回收法氧化镁湿法烟气脱硫机理和工艺基础研究

以氧化镁浆液作为吸收液,对空气与SO₂混合气的鼓泡吸收做了全过程的实验观察.测试分析表明,在高效而稳定的脱硫过程中,吸收液的酸化是由HSO₃^-所致;酸化趋势与SO₂水解规律相一致,由初期高pH值下SO₃^2-为主的缓变到低pH值下HSO₃^-为主的剧变;吸收液温度对脱硫率的影响不敏感;MgSO₃相对高的溶解度和易氧化性及MgSO₄良好的水溶性保持了MgO脱硫的高效率(>98%)和高利用率.燃煤烟气脱硫工业试验确认了MgSO₄经吸收液循环可提浓至实验温度(40～50℃)下的饱和浓度而不产生有害影响,脱硫率因脱硫活性物质的富集反而提高,从而显示出回收工艺的技术经济可行性.