新型MIL-100(Fe)基MOFs材料的制备及其对Sr2+的吸附

采用水热法和溶剂热法制备了金属有机骨架材料——MIL-100(Fe)和MIL-100(Fe)-DMA.利用FTIR、XRD、SEM、XPS和N₂吸附/脱附对材料结构进行了表征.通过静态吸附实验,探究了初始Sr²⁺浓度、吸附时间、溶液pH值和不同共存阳离子对材料吸附性能的影响,研究了两种材料对Sr²⁺吸附过程的吸附动力学和吸附等温线模型.表征结果表明:两种材料基本骨架一致,吸附Sr²⁺对材料骨架影响均可忽略;虽然MIL-100(Fe)-DMA比表面积小于MIL-100(Fe),但由于晶粒尺寸小,堆积形成的介孔结构更有利于Sr²⁺的扩散.吸附实验结果表明:随着反应时间和初始Sr²⁺浓度的增加,两种材料对Sr²⁺的吸附量先迅速增大再逐渐达到平衡;随着pH值的增大,两种材料对Sr²⁺的吸附量增大,且碱性条件下吸附效果好;两种材料吸附过程均符合准二级动力学模型、颗粒内扩散模型和Langmuir吸附等温模型;采用三价铁盐作为铁源以及DMA作为有机溶剂可提高MIL-100(Fe)材料对Sr²⁺的吸附效果.     

城市燃气管网的地震紧急处置系统研究

燃气管网的地震破坏有时会导致火灾、爆炸等严重的次生灾害。城市中的燃气管网系统若能具备地震紧急处置功能,在地震来临时及时采取自动关闭燃气供应阀门等紧急处置措施,可以避免或减少此类次生灾害的发生。介绍了普遍用于燃气管网日常调度管理的SCADA系统的组成与工作原理,探讨了在SCADA系统中加入地震紧急处置功能的可行性,并基于ArcGIS地理软件,通过VBA二次开发编制了燃气管网的地震紧急处置模拟程序,为燃气管网地震紧急处置系统的实现提供了一定依据。     

Energy efficacy used to score organic refuse pretreatment processes for hydrogen anaerobic production

The production of hydrogen through Anaerobic Digestion (AD) has been investigated to verify the efficacy of several pretreatment processes. Three types of waste with different carbon structures have been tested to obtain an extensive representation of the behavior of the materials present in Organic Waste (OW). The following types of waste were selected: Sweet Product Residue (SPR), i.e., confectionary residue removed from the market after the expiration date, Organic Waste Market (OWM) refuse from a local fruit and vegetable market, and Coffee Seed Skin (CSS) waste from a coffee production plant. Several pretreatment processes have been applied, including physical, chemical, thermal, and ultrasonic processes and a combination of these processes. Two methods have been used for the SPR to remove the packaging, manual (SPR) and mechanical (SPRex). A pilot plant that is able to extrude the refuse to 200 atm was utilized. Two parameters have been used to score the different pretreatment processes: efficiency (ξ), which takes into account the amount of energy produced in the form of hydrogen compared with the available energy embedded in the refuse, and efficacy (η), which compares the efficiency obtained using the pretreated refuse with that obtained using the untreated refuse. The best result obtained for the SPR was the basic pretreatment, with η = 6.4, whereas the thermal basic pretreatment gave the highest value, η = 17.0 for SPRex. The best result for the OWM was obtained through a combination of basic/thermal pretreatments with η = 9.9; lastly, the CSS residue with ultrasonic pretreatment produced the highest quantity of hydrogen, η = 5.2.     

Book Reviews

Books reviewed:
Thomas Drabek, Disaster-induced Employee Evacuation
Hugh Brammer, Agricultural Disaster Management in Bangladesh
Boris Porfiriev, Disaster Planning and Emergency Management in Russia
Patrick Bracken and Celia Petty, eds, Rethinking the Trauma of War
R. Cohen and F. M. Deng, eds, The Forsaken People: Case Studies of the Internally Displaced
Tom Trier and Lars Funch Hansen, eds, Conflict and Forced Displacement in the Caucasus: Perspectives, Challenges and Responses     

一种导电混凝土的制备及其电阻率测量

本文综述了导电混凝土的发展以及应用情况,提出了用导电混凝土作为接地材料的设想,并选择氧化铁粉作为骨料,添加适量碳粉配制了一种导电混凝土来验证。通过改变不同的配比制作导电混凝土模型,用四电极法测量其电阻率,得出碳粉比例对其电阻率的影响。     

典型污染稻田水分管理对水稻镉累积的影响

为探讨不同成土母质镉污染稻田土壤进行水分管理对水稻镉吸收累积的影响,以南方典型成土母质花岗岩、板页岩和紫色砂页岩发育的3种水稻土为对象,通过盆栽试验对比分析了淹水和干湿交替2种水分管理模式下,土壤pH值、DTPA提取态重金属、水稻根表铁膜以及不同部位重金属含量等的差异.结果表明,长期淹水处理使花岗岩、板页岩和紫色砂页岩...     

A transportation network assessment tool for hazardous material cargo routing: Weighing exposure health risks,proximity to vulnerable areas,delay costs and trucking expenses

The inherent risks associated with accidental releases of hazardous materials during transport have drawn attention and concerns in the recent decades. The aim of this study is to propose a tool for evaluation and comparison of the transportation networks which can be used to assess the routing options between origins and destinations of the cargos for their suitability for transporting hazardous material cargos by tanker trucks and to identify routes which provide lower accidental release risks, lower public exposure risks, and offer economical benefits. Each route segment of transportation networks were evaluated using specific criteria which included health risk and cost of delay in case of an accidental release of materials, trucking cost and proximity to vulnerable areas. Since, the health impact of hazardous materials differ depending on the characteristics of the material being transported as well as release quantities and atmospheric conditions; this paper aimed in providing a tool that can be used to estimate the impact radius (for health risks) after accidental release of hazardous materials by taking into account different atmospheric conditions based on the meteorological data and solar elevation angle. The Gaussian air dispersion model paired with ArcGIS using Python programming were employed to estimate the health risk impact zones by considering the meteorological data, and accordingly to analyze road segments for cost impacts (delay and trucking costs), and the proximity to vulnerable areas. The route assessment tool was demonstrated with a case study. The results of this study can efficiently aid decision makers for transportation of hazardous materials.     

氢安全研究现状及面临的挑战

氢能具有储运便捷、来源多样、洁净环保等突出优点,许多国家把发展氢能作为重要的能源战略。氢安全是氢能大规模商业化应用的重要保障。在分析国内外氢安全领域近年来最新研究进展的基础上,依次从氢泄漏与扩散、氢燃烧与爆炸、氢与金属材料相容性及氢风险评价等方面,系统总结了国内外氢安全研究面临的挑战,并对我国氢安全的发展提出了建议。     

75t/h燃煤锅炉汞迁移转化规律研究

通过对2台75 t/h循环流化床锅炉烟气中汞排放浓度、燃煤和其他固体副产物中的汞含量进行测试,分析了燃煤大气汞的排放因子,并建立了燃煤汞的质量平衡。结果表明:燃煤锅炉中,大部分汞主要存在于烟气和脱硫副产物中,燃烧后进入炉渣、飞灰中的汞含量较少,低于5%。燃煤汞排放去向与脱硫除尘控制技术有关,不同控制技术协同除汞的效果差异较大,而单质汞是燃煤锅炉汞污染防治的重点和难点。     

复合生物阴极型微生物燃料电池处理废水及同步产电性能

为研究生物阴极在MFC（微生物燃料电池）中的应用,分别以粒径为2~4 mm的颗粒活性炭和粒径为2~4、4~8、8~12 mm的颗粒石墨为阴极基质材料,构建升流复合生物阴极型单室MFC,研究阴极基质材料的种类和粒径对MFC的产电性能和净水效能的影响.结果表明:当阳极基质材料为2~4 mm粒径的颗粒活性炭时,燃料电池中利用玻璃纤维取代离子交换膜,阴极基质材料为选用4~8 mm粒径颗粒石墨的反应柱产电量最大,为534 mV（外电阻为1 000 Ω）,最大功率密度达到631.6 mW/m3,库伦效率为3.82%;阴极的pH越低越有利于阴极的产电反应;不同阴极基质材料的MFC对COD_Cr去除率均在80%左右,TN、NH₄+-N及TP的去除率最高可分别达到79%、93%和34%.研究显示,阴极基质材料的种类和粒径对MFC的产电性影响较大,但对其净水效能的影响不大.