钢铁工业发展循环经济要解决的关键问题

作为经济发展的重要基础产业,钢铁工业在我国国民经济建设中发挥了不可替代的作用。针对钢铁工业发展过程中存在的矛盾和问题,提出发展循环经济,建设资源节约型、环境友好型钢铁工业重点要解决的几个问题。     

美国污染物排放标准对制定我国锡工业污染物排放标准的启示

在分析美国污染物排放标准体系和排放标准法制化管理的基础上,提出我国锡工业污染物排放标准制定中应注意的事项。并指出我国污染物排放标准不适合用标准化管理,应借鉴美国的经验,走法制化管理的道路,通过健全的法律机制,保障锡工业污染物排放标准的制定和实施。     

甲胺生产废水中甲醇的资源化研究

根据甲胺生产废水中各有机物沸点的差异,利用盐酸作为掩蔽剂,通过正交试验和单因素优化试验,对蒸馏法回收甲胺生产废水中甲醇的工艺条件进行优化,表明:在保温温度85℃,保温时间180min,掩蔽剂比(酸(∶氨+胺))1.1:1条件下,甲醇的回收率在80%以上,剩余的氨氮维持在0.4g/L,COD去除率约30%,掩蔽效率在97%以上,出水氯离子浓度为190～195mg/L,pH值6.94～6.99;余液中的混胺盐和铵盐通过蒸发结晶可制得高效氮肥。因此用蒸馏法回收甲醇具有良好的效果,实现了甲胺生产废水中甲醇的资源化。     

Natech guide words: A new approach to assess and manage natech risk to ensure business continuity

The risk posed by natural hazards to the technological systems is known as Natech risk. It is different from the more widely known and studied risk posed by such sites to the environment and society. Though currently, available risk assessment techniques recognize Natech, the specific qualitative technique for Natech risk assessment and reduction has not yet been developed. After analyzing past data of Natech accidents, relevant guide words have been suggested in this study. These guide words will help anticipate Natech risk and visualize the Natech scenario. Once the Natech risk is identified, corresponding risk reduction measures can be taken to avoid possible Natech accidents and consequences.     

Screening for a new Streptomyces strain capable of e cient keratin degradation

Keratinous wastes could be degraded by some microorganisms in nature. Native human foot skin （NHFS） was used as sole nitrogen source to screen microorganisms with keratin-degrading capability. From approximately 200 strains, a strain of Streptomyces sp. strain No. 16 was found to possess the strongest keratinolytic activity, and the total activity in the culture was 110 KU/ml with specific activity of 2870 KU/mg protein （KU： keratinase unit）. Substrate specificity test indicated that the crude keratinase could degrade keratin azure, human hair, cock feathers and collagen. The optimal pH of the crude keratinase ranged from 7.5 to 10 and the temperature ranged from 40℃ to 55℃. Metal chelating agent ethylenediamine tetraacetic acid obviously stimulated the keratinolytic activity but suppressed the proteolytic activity. To our knowledge, this is the first report on specific induction of keratinases by NHFS from an actinomycete. Moreover, excellent characteristics of its crude keratinase may lead to the potential application in waste treatment and recovery, poultry and leather industry, medicine, and cosmetic development.     

中国水泥工业CO2产生机理及减排途径研究

根据水泥生产的基本原理和工艺特点,推导出煤燃烧和石灰质原料煅烧时CO2排放因子分别为2.38 t·t-1和0.527 t·t-1;采用水泥工业CO2排放数学模型计算2001-2008年中国水泥工业CO2排放量,并分析了不同的生产技术水平和产品品种结构对CO2,排放量的影响.结果表明:中国水泥工业CO2排放量与单位产品的...     

Redesign of a component based on ecodesign practices: environmental impact and cost reduction achievements

This paper focuses on ecodesign and its application in the footwear industry aiming to identify how the ecodesign can be applied to the redesign of a shoe component in order to minimize the environmental impact and simultaneously reduce costs of production and assembling. The factors that influence the use of ecodesign, the benefits and the difficulties were also investigated. A longitudinal case study was developed in a company that produces shoe stiffeners. The process of ecodesign implementation and the practices of ecodesign considered during the product redesign were analyzed. A cost reduction of about 10% was observed (in relation to the use of natural fibers and polymers in its composition-31% of biomass and 69% of fossil material). Toxic materials were completely eliminated and a reduction of energy consumption was also noticed (during the injection process). The main contributions of this study are: ecodesign constructs to be further researched the conjoint analysis of technological ability and market potential in a redesign project, and the requirements to gain managerial support for a redesign project.     

Integrating carbon footprint into supply chain management: the case of Hyundai Motor Company (HMC) in the automobile industry

The purpose of this paper is to improve our understanding of carbon footprint within the context of automobile supply chain management. The case study approach is employed as a research method. Primary data were collected through site visits and extensive interviews with HMC’s corporate and plant management. First, identification and measurement of direct and indirect carbon footprint is critical for mitigating supply chain risks. Second, setting the system boundary of measurement is another important issue to integrate the issue of carbon footprint into supply chain management. Third, developing a map of product carbon footprint facilitates identification and measurement of carbon emissions across the supply chain. Companies today operate in a carbon-constrained world. In particular, the automobile industry is under pressure to take a close look at its product carbon footprint. Managing the downstream consequences of the use of its products and inputs from upstream suppliers is critical for developing carbon risk-mitigated supply chain management. This paper is of benefit to academics and managers by providing a new way to integrate carbon emissions in supply chain management. Since climate change and carbon footprint present challenges to many industries, increasing our understanding of how to integrate carbon footprint in supply chain management is necessary, but has seen little research in the automobile industry.     

Improving the environmental performance of machine-tools: influence of technology and throughput on the electrical energy consumption of a press-brake

Machine-tools have been identified as one of the main energy-using products to be analyzed in an Ecodesign perspective, targeting the reduction of their environmental impact. Following this, machine-tool manufacturers are committed to anticipate eminent regulations and are looking for guidelines to improve their products on an effective and low-cost manner. This paper describes part of the energy consumption study followed in the frame of the Ecodesign of a commercial press-brake. All-hydraulic and all-electric commercially available systems, of different capacities and working in real production scenarios, have been included. From this study, a preliminary version of an LCI dataset for the bending process is proposed, structured in technology, machine capacity and usage mode categories, and using the bending cycle as the reference unit. The energy consumption per category was estimated based on a specific process energy model built as a function of the referred parameters. The contribution of the respective machine-tool structure to the environmental impact of the machining process is to be included, targeting the completion of such machining unit process dataset. The full LCA of an all-hydraulic system revealed the significant contribution of the machine-tool structure to the global life-cycle environmental impact of the machine (about 40%), while electricity during use phase contributes with about 46% to the total impact. This contradicts the general results published for other metal and non-metal forming processes, and is understood to be related with the discrete loading character of such forming processes here discussed.     

Expert views on environmental impacts and their measurementin the forest industry

The paper argues that corporate environmental management should be based on significant environmental aspects that result in significant environmental impacts. The Finnish forest industry has substantially reduced its emissions but, being heavy industry, it still causes significant environmental impacts. This paper presents expert views on environmental impacts and their measurement. They were gathered through semi-structured theme interviews. The most frequently mentioned environmental impacts and significant environmental impacts related to water, energy and air. Positive environmental impacts resulted from recycling, forest industry products and use of energy. Traditional emission measurement was considered a well-measured issue. The target subjects of the measurement and especially environmental impact measurement require improvement. The contribution of this research is concerned with the development of measurement and two issues arising from the research are emphasised. First, environmental impact measurement should be further developed. Second, the measurement of the production chain that is physically outside the boundaries of forest industry mills should also be developed.