利用铜矿尾砂研制低强度可控性填料

利用铜矿尾砂、粉煤灰、水泥以及加气剂等,混合搅拌成泥浆体,振动成型,制备出低强度可控性填料(CLSM).试验表明:以水泥12.9％、铜矿尾砂(细集料)22.6％、加气剂3.2％、粉煤灰12.9％等工业废弃物,加水48.4％,固液比控制在(14～15):(15～16)之间,制得的CLSM制品,抗压强度0.35～2.00 ...     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注.处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点.Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果.     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

锂电池正极材料Li2FeS2的充放电机理与热稳定性

随着移动电子设备的飞速发展,锂电池作为新型的能源载体也取得了巨大的进步。与嵌入式氧化物正极材料相比,Li2FeS2不仅具有理想的循环性能,而且其理论容量达到400mAh／g,约为嵌入式氧化物正极材料的2倍。因此,本文从晶体结构、电化学性能、充放电机制、充放电过程中的离子电导率变化以及热稳定性等方面对Li2FeS2正极材料进行了详细的阐述。     

中国铝生命周期能耗与碳排放的情景分析及减排对策

铝工业是高能耗高排放工业,探索铝工业的节能减排路径有助于我国实现《巴黎协定》中的温室气体减排承诺.采用物质流分析和生命周期评价方法,基于存量水平、技术水平和能源结构设置了15种情景,研究了我国铝工业1990～2100年的能耗和碳排放量,探索不同路径下的节能减排潜力.我国铝在用存量将在2040～2050年达到峰值(4.6...     

Characteristics of sewage sludge and distribution of heavy metal in plants with amendment of sewage sludge

In order to better understand land application of sewage sludge, the characterization of heavy metals and organic pollutants were investigated in three different sewage sludges in Shanghai City, China. It was found that the total concentrations of Cd in all of sewage sludge and total concentrations of Zn in Jinshan sewage sludge, as well as those ofZn, Cu, and Ni in Taopu sludge are higher than Chinese regulation limit of pollutants for sludge to be used in agriculture. Leachability of rig in all of studied samples and that of Cd in Taopu sewage sludge exceed the limit values of waste solid extraction standard in China legislation. Based on the characteristics for three kinds of sewage sludge, a pot experiment was conducted to investigate the effect of soil amended with Quyang sewage sludge on the accumulation of heavy metalo.by Begonia semperfloreas-hybr; Ophiopogon japonicas （L.F.） Ker-Gaw; Loropetalum chindense-var, rubrum; Dendranthema morifolium; Viola tricolor; A ntirrhinum majas; Buxas radicans Sieb; Viburnum macrocephalum; Osmanthas fragrans Lour; Cinnamomum camphora siebold and Ligustrum lucidum ait. Results showed that 8 species of plant survived in the amended soil, and moreover they flourished as well as those cultivated in the control soil. The heavy metal concentration in plants varied with species, As, Pb, Cd and Cr concentration being the highest in the four herbaceous species studied, particularly in the roots of D. morifolium. These plants, however, did not show accumulator of As, Pb, Cd and Cr. The highest concentration of Ni and Hg was found in the roots ofD. morifolium, followed by the leaves ofB. semperflorens-hybr. Levels of Zn and Cu were much higher in D. morifolium than in the other plant species. D. morifolium accumulated Ni, Hg, Cu and Zn, which may contribute to the decrease of heavy metal contents in the amended soil. Treatment with sewage sludge did not significantly affect the uptake of heavy metals by the L. chindense-var, rubrum, however, it significantly affected the uptake of heavy metals by D. morifolium.     

侧向风速作用下聚氨酯泡沫双火源火蔓延研究

为探究环境风作用下逆向双点火源聚氨酯泡沫火蔓延及融合行为,开展多组对照实验并从材料传热机理角度分析侧向风速对火蔓延行为中火羽流形态、质量损失和辐射热流场等特征参数的影响。结果表明:风速与上述参数之间存在非线性关系。环境风效应使火焰被拉长且敷贴于预热区表面,增大预热区面积和热反馈;侧向风速的增加对FPU板材质量损失的影响逐渐弱化,且板材的熔滴率与风速呈正相关;无论侧向风是否存在,两侧逆向火焰融合后均达到整个蔓延过程中的峰值温度;风速的存在限制了火焰温度与辐射热通量峰值,也缩短了温度和辐射峰值出现的时间。     

屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果,需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试,探究人体在不同环境温度下体表温度的变化,得出胸部、背部及额头为热量最高部位,并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型,对不同环境中的屏蔽服冷却效果展开研究,分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇,均可帮助人体降低体温,提高舒适度。     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料,采用正交试验优化材料配比、开展膨胀力研究,并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4,其具备优良的流动性、强度及致密性,造浆量达2 100 mL/kg;PC-CAS基材料具有显著的膨胀性,其膨胀力随时间先增大而后趋于稳定,并且该膨胀力随着径向约束的提高而增大;相比于FP材料,PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙;该材料产生的膨胀力可压密封孔段围岩、提高封孔质量,并为后期“二次注浆”提供保压条件。工业试验结果表明,采用PC-CAS基材料进行封孔可显著改善抽采效果,将原有平均浓度10.11%提升至20.08%。     

Pool evaporation: Experimental tests at medium-scale with gasoline

Pool evaporation is a major source of flammable vapour clouds. Predicting the evaporation rate of a liquid hydrocarbon pool is therefore a key issue of dispersion modelling for safety concerns. This paper presents small- and medium-scale experiments of pool evaporation carried out with liquid hydrocarbons (pentane, heptane), hydrocarbon “gasoline-like” mixtures and gasoline. Liquid mass loss was measured and the evaporation rate deduced with its evolution in time. Other observations are highlighted, regarding the evolution of liquid temperatures, mixture compositions, and scale effects like the influence of pool length on surface evaporation rate. Comparisons with well-known correlations are then shown. The authors finally suggest a new semi-empirical correlation with a set of parameters fitted on the performed experiments.