Ti3C2纳米层状材料对废水中Cr（Ⅵ）的光催化去除性能

以Ti₃AlC₂为原料,采用HF刻蚀工艺制备出12种Ti₃C₂纳米层状材料,对其形貌进行了表征,并考察了以其作为光催化剂对废水中Cr（Ⅵ）的处理效果。实验结果表明：HF体积分数为80%、刻蚀时间为48 h时得到的MX-80-48的形貌较好;MX-80-48具有类似石墨烯的二维层状结构,纳米层厚度约20~50 nm,孔径2~10 nm,比表面积14.8 m²/g,在400~700 nm可见光范围内表现出强烈的吸光性;当Cr（Ⅵ）的初始质量浓度为40.00 mg/L、MX-80-48投加量为200 mg/L、pH=2、反应时间4 h（暗反应1 h+光照3 h）时,Cr（Ⅵ）去除率可达100%。     

SMT法插标分析沉积物中磷的地球化学形态

SMT法是一种较为通用的沉积物磷地球化学形态分析方法,但分析结果的准确性和重现性成为制约其进一步应用的关键.本研究以我国沉积物标准样品GSD-12为标样,在详细研究该标样的SMT法提取的磷的各个地球化学形态含量的基础上,提出了插标法控制沉积物中磷地球化学形态的准确性和可比性.在对比了手工分析,Skalar仪器分析及ICP-MS仪器分析的结果之后,针对SMT法操作中存在的问题进行了探讨,提出了操作过程中的注意事项,提出了GSD-12中总磷(TP)、无机磷(IP)、有机磷(OP)、盐酸提取磷(HCl-P)和氢氧化钠提取磷(NaOH-P)等含量分别为(156±5),(77±2),(39±3),(41±2),(42±2)mg/kg,并将该标样用于太湖沉积物中磷形态测定的质量控制,取得了较为满意的结果.     

基于国内水泥生产现状的碳排放因子测算

水泥生产过程中碳排放因子的测算是计算水泥碳排放量的基础,为了准确测算我国水泥行业熟料煅烧阶段碳酸盐矿物分解释放CO2的碳排放因子,就需要对水泥生产线上相关样品做成分测定和综合分析.通过对国内近百条代表性较强的水泥生产线上的生料、熟料、水泥、石灰石、燃煤等样品进行钙、镁、烧失量、碳酸盐等化学成分的定量分析,并考虑新型干法窑和立窑两种生产工艺类型的差别,分析测算了基于国内水泥生产的工艺碳排放因子.结果表明:生料碳酸盐法测算碳排放因子的结果较熟料法的结果低约10kgCO2/tcl;不同窑型的碳排放因子存在明显差异,新型干法窑的碳排放因子多集中在500~520kgCO2/tcl,立窑碳排放因子多集中在480~500kgCO2/tcl;多数熟料含有少量碳酸盐.生料碳酸盐法不涉及燃煤灰分的化学成分,可以规避燃煤灰分成分的影响,测算碳排放因子采用生料碳酸盐法较准确,并且应基于不同窑型,同时考虑碳酸盐分解率问题.     

A transportation network assessment tool for hazardous material cargo routing: Weighing exposure health risks,proximity to vulnerable areas,delay costs and trucking expenses

The inherent risks associated with accidental releases of hazardous materials during transport have drawn attention and concerns in the recent decades. The aim of this study is to propose a tool for evaluation and comparison of the transportation networks which can be used to assess the routing options between origins and destinations of the cargos for their suitability for transporting hazardous material cargos by tanker trucks and to identify routes which provide lower accidental release risks, lower public exposure risks, and offer economical benefits. Each route segment of transportation networks were evaluated using specific criteria which included health risk and cost of delay in case of an accidental release of materials, trucking cost and proximity to vulnerable areas. Since, the health impact of hazardous materials differ depending on the characteristics of the material being transported as well as release quantities and atmospheric conditions; this paper aimed in providing a tool that can be used to estimate the impact radius (for health risks) after accidental release of hazardous materials by taking into account different atmospheric conditions based on the meteorological data and solar elevation angle. The Gaussian air dispersion model paired with ArcGIS using Python programming were employed to estimate the health risk impact zones by considering the meteorological data, and accordingly to analyze road segments for cost impacts (delay and trucking costs), and the proximity to vulnerable areas. The route assessment tool was demonstrated with a case study. The results of this study can efficiently aid decision makers for transportation of hazardous materials.     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

Environmental assessment of garden waste management in the Municipality of Aarhus, Denmark

An environmental assessment of six scenarios for handling of garden waste in the Municipality of Aarhus (Denmark) was performed from a life cycle perspective by means of the LCA-model EASEWASTE. In the first (baseline) scenario, the current garden waste management system based on windrow composting was assessed, while in the other five scenarios alternative solutions including incineration and home composting of fractions of the garden waste were evaluated. The environmental profile (normalised to Person Equivalent, PE) of the current garden waste management in Aarhus is in the order of −6 to 8 mPE Mg⁻¹ ww for the non-toxic categories and up to 100 mPE Mg⁻¹ ww for the toxic categories. The potential impacts on non-toxic categories are much smaller than what is found for other fractions of municipal solid waste. Incineration (up to 35% of the garden waste) and home composting (up to 18% of the garden waste) seem from an environmental point of view suitable for diverting waste away from the composting facility in order to increase its capacity. In particular the incineration of woody parts of the garden waste improved the environmental profile of the garden waste management significantly.     

电极材料对电解法处理循环式准好氧垃圾填埋场渗滤液效果的影响研究

分别用3种不同材料电极（不锈钢、Ti／Pt和Ti／RuO2-IrO2）作阳极、石墨电极作阴极在同一条件下分别对循环式准好氧填埋垃圾场渗滤液进行电解处理对比研究。研究结果表明，随着电解时间的变化，渗滤液中的COD、BOD5、BOD5／COD、重金属离子浓度、色度和pH值均会发生改变。当电解时间为10—20min时，用上述3种电极作阳极电解均会出现渗滤液COD、BOD5、BOD5／COD增大的现象；当电解时间为30—40min时，用Ti／RuO2-IrO2或Ti／Pt电极作阳极电解均可使渗滤液的色度降为0；当电解时间为120min时，分别用3种电极作阳极电解都可使渗滤液中的COD、BOD5和重金属得到有效的去除，其中用Ti／RuO2-IrO2电极作阳极电解对COD、BOD5的去除效果最好：用Ti／Pt电极作阳极电解对Pb^2＋的去除效果最好。     

二次电池电极材料环境影响计算系统

以生命周期评价理论为基础,建立了电极材料电化学性能与环境影响的内在量化关联关系分析方法。基于Java语言,设计和编写了二次电池电极材料环境影响综合计算系统,协调考虑了二次电池的循环特性、电化学特征等,实现了环境影响评价过程中对材料质量需求的便捷计算,进而实现了整个评价操作过程的综合化、软件化和信息化,提高了评价效率。选用LiFePO_4/C,LiFe_(0.98)Ti_(0.02)PO_4/C,LiFe_(0.98)Mn_(0.02)PO_4/C和FeF_3(H_2O)_3/C 4种正极材料基于此系统进行了实例应用。     

生化防护材料的探讨

本文详述了生化防护材料的种类、性能特点,与防护服配件的协调、使用耐久性能以及成本等问题,得出了生化防护材料选用及设计的一般性结论。