RISK ASSESSMENT METHODOLOGY FOR KARST AQUIFERS: (2) SOLUTE-TRANSPORT MODELING

Ground-water flow and solute-transport simulation modeling are major components of most exposure and risk assessments of contaminated aquifers. Model simulations provide information on the spatial and temporal distributions of contaminants in subsurface media but are difficult to apply to karst aquifers in which conduit flow is important. Ground-water flow and solute transport in karst conduits typically display rapid-flow velocities, turbulent-flow regimes, concentrated pollutant-mass discharge, and exhibit open-channel or closed-conduit flow. Conventional ground-water models, dependent on the applicability of Darcy`s law, are inappropriate when applied to karst aquifers because of the (1) nonapplicability of Darcian-flow parameters, (2) typically nonlaminar flow regime, and (3) inability to locate the karst conduits through which most flow and contaminant transport occurs. Surface-water flow and solute-transport models conditioned on a set of parameters determined empirically from quantitative ground-water tracing studies may be effectively used to render fate-and-transport values of contaminants in karst conduits. Hydraulic-flow and geometric parameters developed in a companion paper were used in the surface-water model, TOXI5, to simulate hypothetical slug and continuous-source releases of ethylbenzene in a karst conduit. TOXI5 simulation results showed considerable improvement for predicted ethylbenzene-transport rates and concentrations over qualitative tracing and analytical ground-water model results. Ethylbenzene concentrations predicted by TOXI5 simulations were evaluated in exposure and risk assessment models.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

Modeling rhizofiltration: heavy-metal uptake by plant roots

The discovery of phytoaccumulation potential of plant species has led to its application for remediation of heavy-metal-contaminated soil and wastewater, which is termed as phytoextraction/rhizofiltration. For prediction, analysis, planning and cost-effective design of such systems, mathematical models not only are used as a screening tool but also provide optimal parameters like harvesting time, irrigation schedule, etc. Several laboratory and field scale studies have been carried out in the past, and mathematical expressions have been developed by various researchers for different phenomena like metal adsorption in soil, plant root growth with time, moisture and metal uptake by plant root, moisture movement in unsaturated zone, soil moisture relationship, etc. The complete design of any such phytoremediation program would require the knowledge of behavior of heavy-metal movement in soil, water and plant root system. In this paper, a model for simulating heavy-metal dynamics in soil, water and plant root system is developed and discussed. The governing non-linear partial differential equation is solved numerically by implicit finite difference method using Picard's iterative technique, and the formulation has been illustrated using a characteristic example. The source code is written in MATLAB.     

博斯腾湖水质矿化度模型及预测研究

根据博斯腾湖１９８５～１９９５年水质监测数据和出入湖水量等水文数据观测值，采用水质扩散模型和盐量平衡关系推导出博斯腾湖大湖区（简称博湖）水质矿化度模型，并预测了几种情况下博湖水质矿化度及近几年变化趋势，分析了影响博湖水质矿化度的主要因素，为博湖的近期和远期环境保护规划、环境管理等提供科学依据．     

哈密地区环境中^220Rn子体α潜能浓度所致居民剂量估算

用ＳｔｒａｎｄｅｎＥ．推荐的测量方法对哈密地区环境空气中２２０Ｒｎ子体α潜能浓度测量结果表明，室内、外平均值分别为５６．１和１０．２（×１０－７Ｊ·ｍ－３）。室内外２２０Ｒｎ／２２２Ｒｎ子体α潜能浓度比值分别为０．８４和０３２。２２０Ｒｎ子体所致居民有效剂量当量为２２８μＳｖ·ａ－１（集体有效剂量当量为０．９×０２ｍａｎ·Ｓｖ）。     

车载巡测在区域射频电磁环境质量监测与表征中的应用分析

对北京中央电视塔周围25 km²区域电磁环境质量分别进行了射频的网格法手工监测和车载巡测自动监测，通过SPSS软件等对两种监测方法获取的数据进行了统计对比分析，发现两组数据在总体水平及数值分布特征上较为接近，因此车载巡测监测可以替代网格法监测。以车载巡测数据为基础，绘制了实测数据的道路电磁地图，利用插值法绘制了区域电磁地图，对区域电磁环境质量进行了直观表征。从回应公众关注和城市电磁规划出发，建议今后可利用车载巡测监测加强时域和频域的监测。     

2017年上半年北京市及周边地区空气质量特征分析

依托北京市、廊坊市和保定市高密度的地面空气质量监测、气象要素监测以及PM_2.5化学组分监测和后向轨迹分析等手段，对2017年上半年三地的空气质量进行分析。研究发现：三地中北京市空气质量较好，保定市较差。分污染物来看，保定市SO₂浓度水平明显高于廊坊市和北京市，颗粒物PM₁₀和PM_2.5也呈现保定市最高、北京市最低的规律。从污染物日变化来看，CO、SO₂、NO₂、PM₁₀和PM_2.5呈双峰型分布，O₃呈单峰型分布。从区域整体分布规律来看，PM_2.5和SO₂呈现明显的"南高北低"特征。PM_2.5化学组分分析结果表明：1—4月燃煤对该区域空气质量的影响较大，5—6月机动车排放的影响更为凸显。后向轨迹分析结果表明：在2017年上半年到达北京市的气流中有24%来自于北京市南部，且这些气流多为低空传输，表明区域传输对于北京市空气质量具有一定的影响。     

Test of a Modelling System for Estimating Nitrogen Leaching – A Pilot Study in a Small Agricultural Catchment

Nitrogen leaching is a world-wide concern for the quality of ground- and surfacewater. Measures to abate this is still limited by a lack of understanding mechanisms behind all factors describing the leaching process, time lags between countermeasures and improvement in waterquality and spatial distribution of nitrogen leaching. The purpose of this study was to do an initial test of the SOILNDB model system which is built on the existing mechanistic SOIL and SOILN models and an automatic parameterization procedure for use of simplified input data. The test was done by simulating nitrogen leaching from each of the 150 fields in a small catchment during a three-year study period. The simulated mean root-zone nitrogen leaching rate from all the fields in the catchment was compared to measurements of nitrogen flow in the stream draining the catchment and showed good agreement in between-year dynamics.     

灰色系统GM（1,1）模型在城市地下水总硬度预测中的应用

应用灰色系统GM(1,1)模型,对地下水中总硬度的变化作了预测.检验结果表明,该模型精度较高,是一种较好的预测方法.