城市道路交通事故地点文字表述方法研究

法律文书和交通安全分析要求事故地点记录准确、规范。为规范事故地点记录,在总结国外事故地点记录的点-线法、无规范格式法、线性参照系法、经纬度坐标法基础上,结合国内城市事故定位工作的需求,提出基于线性参照系的"五要素"事故地点文字表述方法。针对城市复杂道路网络,在道路分类的基础上,结合现场记录要求定义和说明"五要素"(事故所在道路、路侧、参照点、方位、距离),最后提出基于"五要素"的文字组合表述方法和事故地点记录实施方案。事故地点"五要素"记录法可供各地在改进事故地点记录时借鉴以提高事故数据的规范性。     

提高废旧塑料再生产品品质的预处理技术

废旧塑料是一种很有价值的可回收利用资源,经过再生可制取高品质塑材制品。但目前因塑料种类、颜色等原因,难有统一、合适的预处理技术,从而导致废旧塑料回收率低和塑材产品品质低等问题。针对废旧塑料的分选、破碎、清洗预处理技术影响塑材产品品质因素进行研究,重点考察破碎料粒度与氯乙烯(VCM)含量对再生塑料物化性质的多因素影响,实验结果表明,PVC型材产品杂质粒子数≤12个/900cm2,优于国标GB5761-1993相应的SG3型号优等品要求的16个/900cm2,且水循环利用率大于90%,环保效益好,具有极大的推广价值。     

Passenger effects on teenage driving and opportunities for reducing the risks of such travel

OBJECTIVES: To review the research evidence concerning the effects of passengers on teenage driving and crash involvement, and to explore ways to reduce negative effects. METHODS: Review of the international literature on these topics. RESULTS: Passenger presence increases crash risk for teenage drivers, especially when the passengers are other teenagers and especially when they are male. Female passengers do not have the same effects. Teenagers are more susceptible to peer influences than adults. The combination of passenger-induced distraction and driving inexperience can disrupt driving behavior, and there is evidence that teenage driver risk taking increases in vehicles with multiple teenagers. Possible ways to reduce the resulting crash problem include altering the in-vehicle behavior of teenagers or influencing their selection of travel partners. Legal restrictions on passengers with teenage drivers have been found effective in reducing the crash problem. Parental monitoring of teenage driving behavior, and programs aimed at teenagers themselves, could be other options but their efficacy is unproven. It currently is unknown why female passengers have a different effect than males or if that might offer clues about future interventions. CONCLUSIONS: Despite passenger restrictions in the majority of states, 42% of 16- and 17-year-old drivers in fatal crashes in 2005 were transporting teenagers with no adults in the vehicle; 61% of teenage passenger deaths (1,222 in 2005) occurred in vehicles driven by other teenagers. Wider application of passenger restrictions is indicated. IMPACT ON INDUSTRY: Ways to make passenger restrictions more effective are needed, and other techniques for reducing this major problem need development and testing.     

Constrained Laboratory vs. Unconstrained Steering-Induced Rollover Crash Tests

Objective: The goal of this study was to evaluate how well an in-laboratory rollover crash test methodology that constrains vehicle motion can reproduce the dynamics of unconstrained full-scale steering-induced rollover crash tests in sand.

Methods: Data from previously-published unconstrained steering-induced rollover crash tests using a full-size pickup and mid-sized sedan were analyzed to determine vehicle-to-ground impact conditions and kinematic response of the vehicles throughout the tests. Then, a pair of replicate vehicles were prepared to match the inertial properties of the steering-induced test vehicles and configured to record dynamic roof structure deformations and kinematic response.

Results: Both vehicles experienced greater increases in roll-axis angular velocities in the unconstrained tests than in the constrained tests; however, the increases that occurred during the trailing side roof interaction were nearly identical between tests for both vehicles. Both vehicles experienced linear accelerations in the constrained tests that were similar to those in the unconstrained tests, but the pickup, in particular, had accelerations that were matched in magnitude, timing, and duration very closely between the two test types. Deformations in the truck test were higher in the constrained than the unconstrained, and deformations in the sedan were greater in the unconstrained than the constrained as a result of constraints of the test fixture, and differences in impact velocity for the trailing side.

Conclusions: The results of the current study suggest that in-laboratory rollover tests can be used to simulate the injury-causing portions of unconstrained rollover crashes. To date, such a demonstration has not yet been published in the open literature. This study did, however, show that road surface can affect vehicle response in a way that may not be able to be mimicked in the laboratory. Lastly, this study showed that configuring the in-laboratory tests to match the leading-side touchdown conditions could result in differences in the trailing side impact conditions.     

Evaluating the Effect of a Mechanical Adjunct to Improve the Installation of Child Restraint Systems to Vehicles

Objectives: We explored if an alternative CRS design that utilized a mechanical adjunct to amplify the force applied to the adult seat belt (intervention CRS) results in more accurate and secure attachment between the CRS and the vehicle compared to similar CRS models that use LATCH or the existing adult seat belt. We conducted three separate studies to address this question and additionally explored: (1) the contribution of prior CRS installation experience (Study 1), (2) the value-added of CRS labeling (Study 2), and (3) paper-based vs. video instructions (Study 3).

Methods: In Studies 1 and 2 we assessed a forward facing combination CRS design (intervention CRS) compared to a commercially available LATCH equipped model (control CRS) and in Study 3 we conducted a similar study using a convertible model of both the intervention and control CRS. Participants installed both CRS in a contemporary minivan and could choose which type of attachment to use for the control CRS (LATCH or seat belt); order of installation was counter-balanced. Evaluators systematically examined installations for accuracy and security.

Results: Study 1: A greater proportion of participants in both the experienced and inexperienced groups was able to securely install the intervention CRS compared to the control CRS: (45% vs. 16%, p =.0001 for experienced) and (37% vs. 6%, p =.003 for inexperienced). No differences between the CRS were observed for accuracy of installation in either user group. Study 2: A greater proportion of participants were able to securely install the enhanced intervention CRS compared to the control CRS: (62% vs. 9%, p =.001). The intervention CRS demonstrated reduced installation accuracy: (30% vs. 61%, p =.001). Study 3: A greater proportion of participants was able to securely install the intervention CRS compared to the control CRS: 79% vs. 66% p =.03, but this effect was smaller than in the previous studies. Participants were less likely to achieve an accurate installation with the intervention CRS compared to the control CRS: 54% vs. 79%, p =.004. Common accuracy errors in each study included twisting or misrouting the seatbelt when installing the intervention CRS.

Conclusions: Our results suggest that novel CRS designs that utilize mechanical advantage to facilitate attachment of the CRS to the vehicle result in a tighter installation compared to LATCH equipped models, but an increase in accuracy errors occurred.     

Feasibility Study of Airbag Concept Applicable to Motorcycles Without Sufficient Reaction Structure

Objectives: An airbag system for motorcycle applications was developed and marketed in 2006 followed by many research projects on the system. In the airbag system, the bag should be supported during the kinetic energy–absorbing period of a rider in a collision. The previously developed system employed a configuration in which motorcycle structures support the airbag, such as a gauge unit and/or a steering structure. The supporting structure functions to receive the reaction force to hold the airbag during a crash to properly absorb the rider's kinetic energy. However, the previous system requires a larger area for this reaction structure and is applicable only to the motorcycles that can provide that area. To overcome this limitation, we propose an airbag system employing another concept. In this concept, the airbag does not use its vehicle structures as a reaction structure but uses the structures of an opposing vehicle, such as doors and/or pillars of an opposing vehicle. In this project, we aim to verify the effectiveness of the proposed system when installed in a motorcycle that cannot provide a larger area for the reaction structure.

Methods: In the system with this concept, it is assumed that the occupant protection performance is largely affected depending on impact configurations. Accordingly, full-scale motorcycle-to-car crash tests using 125 cm³ scooter-type models with and without the proposed system were conducted in various impact configurations. The 7 impact configurations specified in ISO 13232 were selected as the test configurations. Injury variables and injury indices of head, neck, chest, and abdomen were evaluated with the motorcyclist dummy.

Results: Injury variables and indices obtained from the crash tests with the airbag were compared to those of the baseline tests. In 2 impact configurations, the airbags were supported by the side structures of the opposing vehicle and performed to reduce the injury variable of head and/or chest compared to that of the baseline test.

Conclusion: Through the crash tests, beneficial protection effects of the airbag system were confirmed in particular impact configurations. No significant risk for the occupant due to the airbag was observed in the conducted crash tests. It was concluded that the proposed airbag system has feasibility to reduce rider injury in a collision of a motorcycle without sufficient reaction structure.     

校车儿童安全气囊安全性仿真分析

为提高校车乘员约束系统在正面碰撞中对儿童乘员的保护效果,提出一种新型主动式校车儿童安全气囊。运用多刚体动力学分析软件MADYMO建立包括地板、前后排座椅、安全带与第5百分位女性假人在内的校车乘员正面碰撞仿真模型,通过台车试验结果验证模型的准确性。在此基础上,建立主动式安全气囊模型,研究其对12岁和6岁乘员的保护效果。用正交试验方法,分析气囊设计参数,针对12岁乘员进行气囊优化。结果表明:头部气囊的厚度及排气孔大小对乘员伤害影响最大。与原始约束系统相比,经优化后的气囊使12岁乘员的头部、胸部和颈部伤害分别下降84.5%,19%和84.3%,同时加装气囊对6岁儿童也有一定的保护效果。     

A conceptual framework to understand the role of built environment on traffic safety

IntroductionMany U.S. cities have adopted the Vision Zero strategy with the specific goal of eliminating traffic-related deaths and injuries. To achieve this ambitious goal, safety professionals have increasingly called for the development of a safe systems approach to traffic safety. This approach calls for examining the macrolevel risk factors that may lead road users to engage in errors that result in crashes. This study explores the relationship between built environment variables and crash frequency, paying specific attention to the environmental mediating factors, such as traffic exposure, traffic conflicts, and network-level speed characteristics. Methods: Three years (2011–2013) of crash data from Mecklenburg County, North Carolina, were used to model crash frequency on surface streets as a function of built environment variables at the census block group level. Separate models were developed for total and KAB crashes (i.e., crashes resulting in fatalities (K), incapacitating injuries (A), or non-incapacitating injuries (B)) using the conditional autoregressive modeling approach to account for unobserved heterogeneity and spatial autocorrelation present in data. Results: Built environment variables that are found to have positive associations with both total and KAB crash frequencies include population, vehicle miles traveled, big box stores, intersections, and bus stops. On the other hand, the number of total and KAB crashes tend to be lower in census block groups with a higher proportion of two-lane roads and a higher proportion of roads with posted speed limits of 35 mph or less. Conclusions: This study demonstrates the plausible mechanism of how the built environment influences traffic safety. The variables found to be significant are all policy-relevant variables that can be manipulated to improve traffic safety. Practical Applications: The study findings will shape transportation planning and policy level decisions in designing the built environment for safer travels.     

Alcohol policy and fatal alcohol-related crashes in Finland 2000–2016

Objective: The purpose of this study was to explore the relationship between annual alcohol consumption per capita/alcohol price index and the number of alcohol-related fatal motor vehicle accidents (AFMVAs). We were particularly interested in whether a tax reduction in 2004 increased the number of alcohol-related accidents.

Method: The data consisted of all fatal motor vehicle accidents (FMVAs) during the years 2000–2016 obtained from a database maintained by the Finnish Crash Data Institute (OTI). The data included all fatally injured drivers. We compared the OTI data to official statistics on annual alcohol consumption and the alcohol price index.

Results: There were 3,447 fatally injured drivers, of which 25% (n = 869) were intoxicated (blood alcohol concentration [BAC] ≥ 0.05%). After the reduction of the alcohol tax in 2004, the alcohol consumption rose 12.4% from 2003 to 2005 and AFMVAs rose 38%. There was a strong correlation (r = 0.7000, P < .018) between the recorded consumption of alcohol and the number of AFMVAs. There was a strong negative correlation between AFMVAs and the combined (retail + restaurant sales) alcohol price index (r = ?0.7863, P = .0005). A linear mixed-effects model showed that a 1-L increase in total alcohol consumption per capita per year increases AFMVAs by 10.6 and a one-unit increase in the price index decreases AFMVAs by 1.8 per year.

Conclusions: The correlation between alcohol consumption and alcohol-related crashes should be considered when making political decisions regarding alcohol price and availability. Any further liberalization of the alcohol policy would likely lead to an increase in alcohol-related fatal motor vehicle accidents. Similar consequences are likely to occur with drugs. Alcohol price policy is an effective way to improve road safety, but other measures taken to prevent FMVAs also seem to reduce the prevalence of AFMVAs.