硫化物标准溶液的配制及其稳定性研究

采用在碱性条件下加入乙酸锌－乙酸钠溶液形成硫化锌沉淀的形式配制硫化物标准溶液,可使其稳定保存。溶液酸度、水中溶解氧、痕量重金属离子存在、乙酸锌－乙酸钠纯度及光照射等因素,对硫化物标准溶液的稳定性有较大影响。实验结果表明：采用去离子除氧水、控制ｐＨ＝１０－１２、对乙酸锌－乙酸钠进行提纯等方法配制的硫化物标准使用液,室温下至少可稳定保存２个月,浓度基本不变。     

利用含铜蚀刻废液生产碱式碳酸铜

介绍了利用含铜蚀刻废液生产碱式碳酸铜的生产工艺、技术特点、工艺流程和产品质量。以碳酸钠作蚀刻废液的除杂剂,对其进行除杂前处理,控制反应液的pH为3．5～4．0、反应液中碳酸钠的浓度为0．02～0．03mol／L。可除去其中大部分杂质。用碳酸钠与含铜溶液中的铜进行合成反应,控制反应温度为70～80℃、pH为8～9、碳酸钠和含铜溶液中铜的浓度均为1mol／L,反应生成碱式碳酸铜,此产品中铜的质量分数为56％,产品质量优于木材防腐用碱式碳酸铜国内外同类产品。     

Ni/Fe/Cu氧化物的催化臭氧化作用研究

以吐氏酸的臭氧氧化为例,研究了过渡金属镍、铁、铜单组分和不同配比双组分氧化物的催化作用,附着沉淀法制备的Ｎｉ－Ｆｅ（１：４）和Ｎｉ－Ｃｕ（４：１）催化剂的臭氧利用率分别比γ－Ａｌ２Ｏ３载体提高了２８．９％和２４．３％,金属氧化催化臭氧化能显著改善吐氏酸溶液的可生化性,当溴氧消耗量为０．２５－０．３５ｇ／Ｌ时,ＢＯＤ５／ＣＯＤ达到最大值０．２８。     

基于环境监测的矿井通风三维仿真辅助决策系统设计

为优化金属矿山矿井通风系统及辅助决策设计,弥补常用矿井通风仿真解算软件在环境监测、实时解算和辅助决策方面的不足,基于矿井通风理论、环境监测、计算机与通信技术开发矿井通风三维仿真辅助决策系统。提出通过利用实时监测到的井下通风环境参数（风量、风速等）和已存储在系统数据库里的巷道参数,实现对矿井通风网络实时解算,并将其应用到山金阿尔哈达矿井通风系统中。结果表明:矿井通风三维仿真辅助决策系统同步实现了山金阿尔哈达矿井通风系统的环境监测、风网实时解算和三维仿真模拟,提高了其矿井通风管理水平,为矿井通风系统改造优化设计和矿井向深部中段延伸时的通风系统设计提供辅助决策依据。     

Dynamic simulation and performance prediction of free displacer Stirling engines

ABSTRACT

In this study, a Stirling engine with a free-displacer and a kinematically controlled power piston was proposed and analyzed from thermodynamic and dynamic points of view. The analysis intended to reveal the dynamic behaviors of moving components of the engine as well as predicting global thermal performance of it. A dynamic-thermodynamic mathematical model of the engine involving the isothermal gas pressure equation and motion equations of the displacer, power piston and crankshaft was developed. For the solution of the dynamic-thermodynamic model equations, and simulation of the engine’s running, a computer program was prepared in FORTRAN language. By considering a hot-end temperature of 1,000 K and a cold-end temperature of 350 K, dimensions of mechanic, volumetric and thermal components of the engine were quantified interactively. Variations of engine speed, engine power, displacer stroke, and engine torque were examined with respect to the spring constant, displacer mass, displacer damping constant and external load and, results were graphically presented. In comparison with engines having free-piston and kinematically driven displacer, the thermodynamic performance of the free-displacer engine was found to be lower. The engine was found to be able to work at constant speed and power. The values of the displacer mass and spring constant were optimized as 1,500 g and 1,30,000 N/s, respectively and the global speed of the engine was determined to be 47.75 Hz for these values. The effective and the indicated work of the engine were determined to be 113 and 126 J, respectively.     

Incorporating inherent safety during the conceptual process design stage: A literature review

This paper reviews principal concepts, tools, and metrics for risk management and Inherently Safer Design (ISD) during the conceptual stage of process design. Even though there has been a profusion of papers regarding ISD, the targeted audience has typically been safety engineers, not process engineers. Thus, the goal of this paper is to enable process engineers to use all the available design degrees of freedom to mitigate risk early enough in the design process. Mainly, this paper analyzes ISD and inherent safety assessment tools (ISATs) from the perspective of inclusion in conceptual process design. The paper also highlights the need to consider safety as a major component of process sustainability. In this paper, 73 ISATs were selected, and these tools were categorized into three groups: hazard-based inherent safety assessment tools (H-ISATs) for 22 tools, risk-based inherent safety assessment tools (R-ISATs) for 33 tools, and cost-optimal inherent safety assessment tools (CO-ISATs) for 18 tools. This paper also introduces an integrated framework for coordinating the conventional process design workflow with safety analysis at various levels of detail.     

碱性蚀刻废液的再生回用与铜回收技术

介绍了一种革取技术,可在生产过程中处理印制线路板生产的碱性蚀刻废液,使之脱铜后再生,实现碱性蚀刻废液的循环使用;运用反革取技术使苹取剂复活循环使用;反革取提取到的硫酸铜经电解为电解铜,电解液可循环使用。     

Sorption of hazardous metals from single and multi-element solutions by saltbush biomass in batch and continuous mode: interference of calcium and magnesium in batch mode

Batch studies were performed to determine the interference of calcium (Ca) and magnesium (Mg) on the sorption of Cu(II), Cd(II), Cr(III), Cr(VI), Pb(II), and Zn(II) [from CuSO(4), K(2)Cr(2)O(7), Pb(NO(3))(2), Cr(NO(3))(3), ZnCl(2), and Cd(NO(3))(2)] by saltbush (Atriplex canescens) biomass. The results demonstrated that Ca and Mg at concentrations of at least 20 times higher than the concentration of most of the target metals did not interfere with the metal binding. The data show that the batch binding capacity from a multimetal solution at pH 5.0 was (micromol/g) about 260 for Cr(III) and Pb, and about 117, 54, and 49 for Cu, Zn, and Cd, respectively. The use of 0.1M HCl allowed the recovery of 85-100% of the bound Cu, Cr(III), and Pb, and more than 37% of the bound Cd and Zn. The column binding capacity for Pb was about 49 micromol/g from both the single and multimetal solutions, while it was, respectively about 35 and 23 micromol/g for Cr(III). The binding capacity for Cu and Zn from the single and multimetal column experiments was 35 micromol/g and less than 10 micromol/g, respectively. The stripping data from the single column experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and Zn, 90% and 74% of the bound Pb and Cr(VI), respectively, and less than 25% of the bound Cd and Cr(III), while the stripping from the multimetal experiment showed that 0.1M HCl allowed the recovery of all the bound Cu and about 74%, 54%, 43%, and 40% of the bound Pb, Zn, Cd, and Cr(III), respectively.     

水溶开采岩盐矿环境影响评价重点与污染防治措施探讨

随着科技进步和经济发展,地下卤水和岩盐矿床逐步得到开发利用,该类矿床开采引起的环境影响日益受到关注。本文在分析水溶开采岩盐矿钻探工艺和采输工程基础上,重点分析了岩盐矿水溶开采项目环境影响评价中的污染源及源强,着重阐述了重点污染源的环境影响。并针对特征环境影响因素提出了指导性的环境防护措施。     

Analytical solution to evaluate salt precipitation during CO2 injection in saline aquifers

Carbon dioxide sequestration in deep saline aquifers is a means of reducing anthropogenic atmospheric emissions of CO₂. Among various mechanisms, CO₂ can be trapped in saline aquifers by dissolution in the formation water. Vaporization of water occurs along with the dissolution of CO₂. Vaporization can cause salt precipitation, which reduces porosity and impairs permeability of the reservoir in the vicinity of the wellbore, and can lead to reduction in injectivity. The amount of salt precipitation and the region in which it occurs may be important in CO₂ storage operations if salt precipitation significantly reduces injectivity. Here we develop an analytical model, as a simple and efficient tool to predict the amount of salt precipitation over time and space. This model is particularly useful at high injection velocities, when viscous forces dominate.First, we develop a model which treats the vaporization of water and dissolution of CO₂ in radial geometry. Next, the model is used to predict salt precipitation. The combined model is then extended to evaluate the effect of salt precipitation on permeability in terms of a time-dependent skin factor. Finally, the analytical model is corroborated by application to a specific problem with an available numerical solution, where a close agreement between the solutions is observed. We use the results to examine the effect of assumptions and approximations made in the development of the analytical solution. For cases studied, salt saturation was a few percent. The loss in injectivity depends on the degree of reduction of formation permeability with increased salt saturation. For permeability-reduction models considered in this work, the loss in injectivity was not severe. However, one limitation of the model is that it neglects capillary and gravity forces, and these forces might increase salt precipitation at the bottom of formation particularly when injection rate is low.