纳米Al_2O_3固定化红平红球菌菌球的制备及其对苯酚的降解

以海藻酸铝为主要包埋材料、纳米Al_2O_3为添加剂,包埋固定红平红球菌,制得纳米Al_2O_3固定化红平红球菌菌球,并将其用于苯酚的降解。表征结果显示:菌球内部包含丰富的菌丝体;内部孔径以中孔居多。实验结果表明:菌球的最优制备方案为0.05 g纳米Al_2O_3加入3 m L海藻酸钠溶液中、海藻酸钠质量分数6%、微生物包埋量0.5 m L/m L(以海藻酸钠溶液计)、Al_2(SO_4)_3质量分数3%;在初始苯酚质量浓度为400 mg/L、反应时间为24h、菌球加入量为8 g/L、反应p H为8.0、反应温度为30℃的条件下,菌球首次使用时可使苯酚完全降解,使用5次后的苯酚降解率仍达93%以上,具有良好的循环使用性。     

CeO2负载型双金属Pd/Fe催化还原四氯化碳的实验研究

实验采用共沉淀法制得CeO_2负载型双金属Pd/Fe催化剂,并对催化剂的结构特征进行了X射线衍射(XRD)和扫描电子显微镜(SEM)分析.使用负载型双金属催化剂对四氯化碳进行还原脱氯研究,探究了温度、溶液初始pH值、催化剂投加量及不同钯载率对四氯化碳脱氯的影响;对比了不同催化剂包括纳米零价铁、纳米钯铁双金属和CeO_2负载型双金属Pd/Fe对四氯化碳的脱氯效果.实验结果表明负载型双金属催化剂在温度为40℃,溶液初始pH为6.5,催化剂投加量为0.4 g·L-1,钯载率为0.5%的条件下,对初始浓度为5 mg·L-1的四氯化碳的去除率高达99.88%.在相同的反应条件下,纳米零价铁和纳米钯铁双金属对四氯化碳的脱氯率分别为58.25%、87.94%.此外,对四氯化碳的脱氯机制进行了探讨.     

改良剂对根际土壤-水稻系统中镉运移的影响

稻田镉(Cd)污染治理是我国目前农田重金属污染治理的重点和难点.铁的氧化还原过程对Cd在土壤-水稻系统中的运移发挥着极其重要的作用.从铁循环调控入手,研发阻控稻米Cd累积的钝化技术及产品,势必能为农田重金属污染治理提供新的解决途径.本研究以自主研发的改良剂为对象,通过野外田间试验,研究改良剂对Cd从根际土壤向根表铁膜迁移及在水稻不同组织器官间转运的影响,探索铁循环影响Cd在根际土壤-水稻系统中运移的机制.结果表明,改良剂施用促进了根际土壤中铁硫化物的形成,其与Cd共沉淀显著减少了分蘖期、拔节期和灌浆期根际土壤中乙酸铵浸提态Cd(NH4AcCd)的含量;成熟期排水烤田致使铁硫化物被氧化,其对Cd的释放显著增大了根际土壤中NH4Ac-Cd的含量;铁硫化物形成减弱了Fe(Ⅱ)从根际土壤向根表的迁移能力,铁膜中铁(DCB-Fe)的含量随之减小,铁膜对Cd的吸附能力减弱导致分蘖期和灌浆期铁膜中Cd(DCB-Cd)的含量显著减小;改良剂施用有效减弱了根系对Cd的转运能力,增大了拔节期、灌浆期和成熟期Cd在根系的分布比例,而减少了拔节期、灌浆期和成熟期Cd在茎叶、以及成熟期Cd在糙米中的分布比例.本研究成果将为后期改良剂的研发及应用提供理论依据,对解决稻田Cd污染治理难题具有重要意义.     

新型MIL-100(Fe)基MOFs材料的制备及其对Sr2+的吸附

采用水热法和溶剂热法制备了金属有机骨架材料——MIL-100(Fe)和MIL-100(Fe)-DMA.利用FTIR、XRD、SEM、XPS和N₂吸附/脱附对材料结构进行了表征.通过静态吸附实验,探究了初始Sr²⁺浓度、吸附时间、溶液pH值和不同共存阳离子对材料吸附性能的影响,研究了两种材料对Sr²⁺吸附过程的吸附动力学和吸附等温线模型.表征结果表明:两种材料基本骨架一致,吸附Sr²⁺对材料骨架影响均可忽略;虽然MIL-100(Fe)-DMA比表面积小于MIL-100(Fe),但由于晶粒尺寸小,堆积形成的介孔结构更有利于Sr²⁺的扩散.吸附实验结果表明:随着反应时间和初始Sr²⁺浓度的增加,两种材料对Sr²⁺的吸附量先迅速增大再逐渐达到平衡;随着pH值的增大,两种材料对Sr²⁺的吸附量增大,且碱性条件下吸附效果好;两种材料吸附过程均符合准二级动力学模型、颗粒内扩散模型和Langmuir吸附等温模型;采用三价铁盐作为铁源以及DMA作为有机溶剂可提高MIL-100(Fe)材料对Sr²⁺的吸附效果.     

Fe3O4纳米磁性微粒对全氟辛烷磺酸盐的吸附

采用共沉淀法合成Fe3O4纳米磁性颗粒,用透射电子显微镜(TEM)、X射线衍射仪(XRD)以及振动样品磁强计(VSM)对Fe3O4纳米磁性颗粒的粒径、形貌和磁性进行表征并研究Fe3O4纳米磁性微粒对全氟辛磺酸盐的吸附。结果表明:在PFOS初始浓度4 mg/L,pH为3,反应时间24 h,Fe3O4纳米磁性微粒投加量1.25 g/L,对全氟辛磺酸盐去除率达到90%。Fe3O4纳米磁性微粒对PFOS的吸附符合Freundlich吸附方程。     

农业生态与土壤环境中铁元素的关系

论述了铁元素的地球化学特征及其分布 ,与铁元素有关的主要作物分类、作物与铁元素的关系以及影响铁元素有效态的因素 ,铁肥的种类和施用方法与效果     

Removal of Alachlor from Water by Catalyzed Ozonation in the Presence of Fe2+, Mn2+, and Humic Substances

Abstract

The effects of Fe(II), Mn(II) and humic substances on the catalyzed ozonation of alachlor, an endocrine disruptor were investigated. Results revealed that small amounts of Fe(II), Mn(II), and humic substances could enhance the ozonation of alachlor, but larger amounts of them would retard the oxidation. These results were successfully identified by an electron paramagnetic resonance (EPR) spectroscopy/spin-trapping method that could quantify hydroxyl radicals. The production of hydroxyl radicals was obviously increased with the increasing of Fe(II) concentration, which contributed to enhance ozonation at low concentrations. But the excess Fe(II) consumed some of the radicals when it was added at a higher concentration (1.5 mg/L). However, no obvious radicals were observed when a different amount of Mn(II) was used, and the catalytic ozonation of alachlor by Mn(II) mainly followed the mechanism of “active sites created on the surface of MnO₂.” The radical pathway was followed when alachlor was ozonated with different concentrations of humic substances because of its radical initiating, promoting, and inhibiting effects.     

Experimental and DFT insights into nitrogen and sulfur co-doped carbon nanotubes for effective desulfurization of liquid phases: Equilibrium & kinetic study

• Synthesis of NS-CNTS is used in a high desulfurization performance. • Synthesizing NS-CNT is considered as a novel adsorbent from low-cost precursors. • A high sulfur removal capacity for NS-CNT is attained compared with recent works. Herein, nitrogen and sulfur co-doped carbon nanotubes (NS-CNT) adsorbents were synthesized via the chemical vapor deposition technique at 1000°C by employing the camphor, urea and sulfur trioxide pyridine. In this study, desulfurization of two types of mercaptans (dibenzothiophene (DBT) and tertiary butyl mercaptan (TBM) as nonlinear and linear forms of mercaptan) was studied. In this regard, a maximum capacity of NS-CNT was obtained as 106.9 and 79.4 mg/g and also the removal efficiencies of 98.6% and 88.3% were achieved after 4 h at 298K and 0.9 g of NS-CNT for DBT and TBM, respectively. Characterization of the NS-CNTs was carried out through exploiting scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and elemental analysis (CHN). The isotherm equilibrium data could be ascribed to the Freundlich nonlinear regression form and the kinetic data was fitted by nonlinear form of the pseudo second order model. The negative values of ΔS⁰, ΔH⁰ and ΔG⁰ specify that the adsorption of both types of mercaptans was a natural exothermic process with a reduced entropy. Maintenance of more than 96% of the adsorption capacity even after nine cycles suggest the NS-CNT as a superior adsorbent for mercaptans removal in the industry. Density functional theory (DFT) calculations were also performed to peruse the effects of S/N co-doping and carbon monovacancy defects in CNTs toward the adsorption of DBT and TBM.     

Dissimilatory reduction of Fe~III (EDTA) with microorganisms in the system of nitric oxide removal from the flue gas by metal chelate absorption

IntroductionThecombustionoffossilfuelsgeneratesSO2 andNOxpollutantswhichcauseairpollutionandacidrain .Existingfluegasdesulfurization(FGD)scrubbersinvolvelimestoneprocesses,whichareefficientforcontrollingSO2 emission ,butareincapableofremovingalmostwater i…     

板料拉深成形润滑模式研究

对板料拉深成形中的两种常用润滑模式进行了研究 ,并按膜厚尺寸对这两种润滑模式进行分类。在分析其润滑机理的基础上提出一种复合润滑模式 ,这种润滑模式使液体润滑剂和微米级粉体两种润滑介质的优势互相补充。实验证明 ,具有很好的润滑效果。另外 ,提出纳米微粒添加剂在板料润滑中的应用前景