Experimental investigation of the e ect of flow turbulence and sediment transport patterns on the adsorption of cadmium ions onto sediment particles

The mechanism of flow turbulence,sediment supply conditions,and sediment transport patterns that affect the adsorption of cadmiumions onto sediment particles in natural waters are experimentally simulated and studied both in batch reactors and in a turbulencesimulation tank.By changing the agitation conditions,the sediment transport in batch reactors can be categorized into bottom sediment-dominated sediment and suspended sediment-dominated sediment.It is found that the adsorption rate of bottom sediment is much lessthan that of suspended sediment,but the sediment transport pattern does not affect the final(equilibrium)concentration of dissolvedcadmium.This result indicates that the parameters of an adsorption isotherm are the same regardless of the sediment transport pattern.Inthe turbulence simulation tank,the turbulence is generated by harmonic grid-stirred motions,and the turbulence intensity is quantifiedin terms of eddy diffusivity,which is equal to 9.84F(F is the harmonic vibration frequency)and is comparable to natural surfacewater conditions.When the turbulence intensity of flow is low and sediment particles stay as bottom sediment,the adsorption rateis significantly low,and the adsorption quantity compared with that of suspended sediment is negligible in the 6 h duration of theexperiment.This result greatly favors the simplification of the numerical modeling of heavy metal pollutant transformation in naturalrivers.When the turbulence intensity is high but bottom sediment persists,the rate and extent of descent of the dissolved cadmiumconcentration in the tank noticeably increase,and the time that is required to reach adsorption equilibrium also increases considerablydue to the continuous exchange that occurs between the suspended sediment and the bottom sediment.A comparison of the results ofthe experiments in the batch reactor and those in the turbulence simulation tank reveals that the adsorption ability of the sediment,andin particular the adsorption rate,is greatly over-estimated in the batch reactor.     

基于ARDL方法分析福建省资源利用与经济增长关系

运用物质流分析方法以及最新发展的自回归分布滞后模型(ARDL),对福建省1990~2008年资源利用和实际GDP二者关系进行检验和分析.采用了物质流分析指标中直接物质投入来表征区域资源利用量.ARDL边界检验结果表明,资源利用和经济增长间存在稳定的长期均衡关系.进一步通过ARDL模型揭示了区域经济增长对资源利用长期弹性系数,其值约为0.73,通过误差修正模型揭示了短期弹性系数,表明了经济增长到资源利用的长期格兰杰因果关系.对福建省经济增长和资源保护战略提出了政策建议.这一研究思路和方法具有普适性,可以适用于其他地区关于资源利用和经济增长的问题的讨论和研究.     

连续流动氢化物发生原子荧光法测定水中硒

文章介绍连续流动一氢化物发生一原子荧光测定水中硒的方法,研究了盐酸浓度、硼氢化钾浓度、灯电流、光电倍增管负高压、泵速、载气和屏蔽气流量等对测定硒的影响,找出测定水中硒最佳条件,在最佳条件下,校准曲线相关系数为0.9999.方法检出限为0.0095μg/L,方法的测量范围为0.038-300μg/L,回收率在91.8%-...     

扬水曝气器曝气室提水性能模型应用研究

文章根据扬水曝气器曝气室的流体特性,在曝气室内气-液两相流体所受推动力和曳力平衡条件下,建立了一维两相流提水性能模型,并应用于同温层曝气器流体运动特性的模拟预测。结果表明:模型对同温层曝气器上升段气含率的估计值与实测值之间的误差限为±10%,对流体表观上升速度的误差限为±20%。这说明提水性能模型对同温层曝气器的流体特性模拟具有很强的适用性。     

有关斜管沉淀池的上升流速讨论

文章从理论上了分析斜管沉淀池上升流速对沉淀池处理效果的影响,及原水特性与斜管沉淀池上升流速取值的关系。讨论分析斜管沉淀池设计时,应根据原水特性不同选择不同的斜管沉淀池上升流速。     

Fouling distribution in forward osmosis membrane process

Fouling behavior along the length of membrane module was systematically investigated by performing simple modeling and lab-scale experiments of forward osmosis （FO） membrane process. The flux distribution model developed in this study showed a good agreement with experimental results, validating the robustness of the model. This model demonstrated, as expected, that the permeate flux decreased along the membrane channel due to decreasing osmotic pressure differential across the FO membrane. A series of fouling experiments were conducted under the draw and feed solutions at various recoveries simulated by the model. The simulated fouling experiments revealed that higher organic （alginate） fouling and thus more flux decline were observed at the last section of a membrane channel, as foulants in feed solution became more concentrated. Furthermore, the water flux in FO process declined more severely as the recovery increased due to more foulants transported to membrane surface with elevated solute concentrations at higher recovery, which created favorable solution environments for organic adsorption. The fouling reversibility also decreased at the last section of the membrane channel, suggesting that fouling distribution on FO membrane along the module should be carefully examined to improve overall cleaning efficiency. Lastly, it was found that such fouling distribution observed with co-current flow operation became less pronounced in counter- current flow operation of FO membrane process.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.     

多介质土壤滤层系统(MSL)与潜流式人工湿地技术处理海水养殖废水的效能比较

为探索经济可行的海水养殖废水处理技术,选取南美白对虾海水养殖废水,对比研究了多介质土壤滤层(multi-soillayer,MSL)系统和4种不同植物配置潜流式人工湿地(大米草型、芦苇型、香蒲型和无植物型)在400 L·(m2·d)-1水力负荷下的废水处理效果.结果表明,MSL对化学需氧量(COD)、总磷(TP)、总氮(TN)、氨氮(NH+4-N)和硝态氮(NO-3-N)的平均去除率分别为80.38%±2.14%、68.14%±3.51%、40.79%±3.10%、42.68%±2.90%和54.19%±5.15%,均高于其他4种不同植物配置的潜流式人工湿地的处理效果.4种人工湿地系统对各污染物的去除率从高到低依次为:大米草型>芦苇型>香蒲型>无植物型.     

金山湖闸坝型水体表层沉积物重金属分布特征及生态风险评价

采集金山湖闸坝型水体表层沉积物,经HNO3-HF-HClO4消解后,通过电感耦合等离子质谱法(ICP)测定沉积物As、Cu、Pb、Cd、Zn、Cr等6种重金属含量,通过富集系数、地累积指数法、潜在生态风险评价以及溯源分析等对沉积物重金属的分布特征进行综合评价.结果表明:1金山湖表层沉积物As、Pb、Cu、Zn、Cr、Cd的平均值分别为23.22、26.20、24.42、143.12、245.30、0.67 mg·kg-1,其中,Pb、Cu含量低于土壤环境质量标准一、二级标准,Zn、Cr含量介于土壤环境质量标准一级标准与二级标准之间,As、Cd含量均超过土壤环境质量标准一、二级标准;从空间分布来看,Pb和Zn在北固山广场的1号样点形成最高值,As、Cu、Cr、Cd的含量分别在镇润洲码头附近的12号样点、运粮河河口区域的3号样点、湖中靠近征润州岛的14号样点、春江潮与解放路泵站之间往湖中心处的7号样点处出现最高值.2富集系数表现为As>Cr>Cd>Pb>Zn>Cu,表明金山湖表层沉积物中As的富集量最大,Cu最小.3根据地累积指数判断,金山湖未受Cu的污染,Pb、Zn、Cd则为轻度污染,As、Cr表现为偏中度污染;46种重金属的单项潜在生态危害系数表现顺序为Cd>As>Cr>Pb>Cu>Zn,其中,Cr、Pb、Cu、Zn均为轻微生态危害程度,As和Cd处于中等生态危害程度;从全湖分布看,北固湾广场附近(1号样点)、春江潮与解放路泵站之间靠近岸边区域(6号样)、春江潮与解放路泵站之间往湖中心处(7号样点)以及镇润洲码头附近(12号样点)样点的潜在生态危害为中等,其余采样点均为轻微潜在生态危害;5主成分分析结果表明,金山湖沉积物重金属的差异除了受到各样点沉积物环境背景值的影响外,还与各采样点周围人为活动、外源污水排放等有密切关系.6本次研究中发现闸坝对金山湖沉积物重金属分布的影响不明确,该部分内容尚需进行长时间尺度的研究.     

北京典型道路交通环境机动车黑碳排放与浓度特征研究

本研究对2009年北京市典型道路(北四环中路西段)进行实际交通流监测和调研,分析了总车流量、车型构成和平均速度的日变化规律.应用北京机动车排放因子模型(EMBEV模型)和颗粒物黑碳排放的研究数据,计算该路段的黑碳平均排放因子和排放强度.根据同期观测的气象数据,应用AERMOD模型对道路黑碳排放进行了扩散模拟,并根据城市背景站点和道路边站点的监测数据对模拟结果进行了验证.研究表明,该路段黑碳平均排放因子与重型柴油车在总车流中所占比例呈现出极强的相关性,由于北京市实行货车区域限行制度,日间时段总车流的平均黑碳排放因子为(9.3±1.2)mg·km-1·veh-1,而夜间时段上升至(29.5±11.1)mg·km-1·veh-1.全天时均黑碳排放强度为17.9~115.3g·km-1·h-1,其中早(7:00—9:00)晚(17:00—19:00)高峰时段的黑碳排放强度分别为(106.1±13.0)g·km-1·h-1和(102.6±6.2)g·km-1·h-1.基于同期监测数据验证,AERMOD模型的模拟效果较好.模拟时段的道路黑碳排放对道路边监测点的平均浓度贡献为(2.8±3.5)μg·m-3.由于局地气象条件差异,日间和夜间的机动车排放对道路边黑碳的模拟浓度存在显著差异.日间时段,小型客车排放对道路边站点的黑碳浓度贡献最高,达(1.07±1.57)μg·m-3;其次为公交车,达(0.58±0.85)μg·m-3.夜间时段货车比例明显上升,其黑碳排放占主导地位,贡献浓度(2.44±2.31)μg·m-3.