Ni2+对2-氯酚厌氧降解系统的影响

针对重金属对难降解有毒有机物厌氧降解的影响问题,采用间歇试验法研究Ni2 对2-氯酚(2-CP)厌氧降解系统的影响规律.结果表明,当ρ(Ni2 )＜5 mg/L时,Ni2 对2-CP厌氧降解表现出轻度促进,当ρ(Ni2 )为5～500 mg/L,Ni2 以抑制作用为主,抑制作用随ρ(Ni2 )的增加而增强.Ni2 对原基质及关键中间产物苯酚和苯甲酸的抑制程度表现为:苯酚＞苯甲酸＞2-CP;ρ(Ni2 )低时的驯化能有效提高厌氧污泥对Ni2 毒性的耐受性能,300 mg/L Ni2 对2-CP降解的抑制从驯化前的65%降至驯化后的21%.Ni2 对2-CP厌氧降解的抑制作用与污泥中Ni的截留量之间存在正相关关系.抑制浓度CIP值和方程αC=[1-(I/I*)m]/[1 (I/I*)n)]能较好地表征厌氧生物处理过程受抑制程度.     

双冲击泡沫水浴除尘器在钢铁联合企业双燃料锅炉上的应用

结合工程实例介绍了双冲击泡沫水浴除尘器的应用领域、结构特点、处理效果及其现实意义和发展前景。     

我国现阶段应采取的节水措施

文中提及我国现阶段节水工作要从提高新水资源利用率入手，在进行节水宣传教育的同时，建立能动的节水机制，充分利用宝贵的降水资源，发挥可利用新水资源最大的效率，为我国未来经济社会的发展创造有利的条件。     

甲硫醚废气制取二甲基亚砜技术研究

选择双氧水作氧化剂，将具有恶臭气味的涕灭威生产的副产物甲硫醚氧化成无臭的二甲基亚砜。通过实验，优化了工艺条件，减少了安全隐患，提高了二甲基亚砜的产率，消除了恶臭污染。     

细密沟槽铝合金挤压件模具的改进

对细密沟槽铝合金挤压件的结构进行了分析,研究和探讨了该类冷挤压件的成形过程。通过对挤压过程中金属的流动,以及模具的受力分析和模具结构的改进,解决了该类零件在挤压过程中上模的断齿问题。     

混凝法在滇池蓝藻暴发期净水除藻的可行性研究

采用精制硫酸铝为混凝剂,L93^4正交法安排滇池蓝藻暴发期混凝沉降除藻除净水工艺实验。结果表明,混凝剂种类、水样pH值对蓝藻去除率有很大影响。研究确定了混凝剂除藻最佳操作条件,为混凝法去除蓝藻的工业化提供了理论和实际操作依据。     

控制系统在污水处理中的应用

介绍了污水控制系统的工艺流程、系统配置和软件设计，并对由PLC和上位机组成的自动控制系统的主要功能进行了说明。上位机通过组态软件设计承担监控和管理任务，下位机通过编程软件实现实时数据采集和自动控制功能。     

常压塔塔顶腐蚀关键参量相关性分析与预测

预测常压塔顶回流罐切水的关键离子浓度可以为常压塔顶系统工艺防腐提供技术指导。收集了某炼厂2014-2016年常压装置的生产实时工艺参数、原料及产品采样数据、水质分析化验参数,采用线性插值方法对不同时间尺度的数据进行补全。通过线性相关性分析获得了影响常压塔顶回流罐切水总铁离子浓度、pH的主要因素,并基于深度学习、支持向量机回归、粒子群优化方法建立了腐蚀关键参量预测模型。结果表明,pH值和总铁离子浓度的相关因素大部分重叠,与原料性质及产品馏出温度较强相关;建立的回归模型预测精度高,在训练集和预测集上,总铁离子浓度预测值与测量值最大偏差分别为4. 4%和9. 8%,pH值预测值与测量值最大偏差分别为0. 9%和1. 1%。     

板材成形新技术及其发展趋势(Ⅱ)

介绍了多点成形技术、激光成形技术、冲压智能化技术、成形过程的计算机仿真技术等几种柔性化程度高的板材成形新技术及其发展趋势     

Influence of new town development on the urban heat island - The case of the Bundang area

Five new towns have been developed around the Seoul metropolitan area since 1996. However, these new towns generate lots of traffic and related problems in the areas including those new towns and Seoul as a result of increases in population and a lack of ecological-self-sufficiency. Currently, construction of another new town is under deliberation, and what should be a major consider is the notion that the new town be located within a wide, green zone. Many studies have revealed that green space can play an important role in improving urban eco-meteorological capability and air quality. In order to analyze the urban heat island which will be created by the new urban development, and to investigate the local thermal environment and its negative effects caused by a change of land use type and urbanization, Landsat TM images were used for extraction of urban surface temperature according to changes of land use over the last 15 years. These data are analyzed together with digital land use and topographic information. As a study result, it was found the urban heat island of the study area from 198.5 to 1999 rapidly developed which showed a difference of mean temperature above 2.0. Before the Bundang new town construction the temperature of the residential area was the same as a forest, but during the new town construction in 1991 analysis revealed the creation of an urban heat island. The temperature of a forest whose size is over 50% of the investigation area was lowest, and thus the presence of a forest is believed to have a direct cooling effect on the urban environment and its surroundings. The mean temperature of the residential and commercial areas in the study was found to be 4.5 higher than the forest, and therefore this part of land use is believed to be the main factor causing the temperature increase of the urban heat island.