道路车辆电气及电子设备在振动试验中的应力循环和试验设计原则

本文试从振动试验的特点和受试样品承受振动激励的应力循环切入分析,为把握试验方案的拟订提供支持。同时也简要介绍了应力循环的计算方法,供试验人员参考使用。     

Robustness testing of a free-fall triboelectric separation process for plastic waste recovery

Among the separation techniques used in industries, the triboelectric separation of insulating particles using a rotary tube is an effective way employed in the waste recovery of plastic and mineral products. This process, also called free-fall triboelectric separation, is widely used for the sorting of granular mixtures resulting from industrial plastic wastes. Given that the robustness of such a separation process is an important issue, a standard procedure is used for determining the set point and for minimising the process sensitivity of sorting mixed particles of different polymers to changes in the values of some critical factors. The aim of this paper was to analyse the efficiency of the triboelectric separation process of polymers with respect to any slight variation in the values of the most significant factors. Experiments with a sample of high-density polyethylene and polyvinyl chloride plastic granules were carried out on a laboratory experimental bench. Several one-factor-at-a-time experiments, followed by two factorial designs (one composite and the other fractional), were performed based on the following experimental procedure: (1) determination of the variation limits of the input variables; (2) identification of the set point and (3) robustness testing of the process, i.e. testing whether the performance of the system remains high even when the factors vary slightly around the set point.     

采用水解酸化-复合好氧处理制药工业废水的工艺评价

以制药工业综合废水处理为例对其采用的两级水解酸化复合好氧工艺的处理效果进行评估。按常规指标进行评估,该工艺对于制药综合废水的处理效果达到了设计目的,COD去除率可达到78.2%以上,NH+4-N的去除率达到99.3%,出水质量基本满足"污水综合排放标准(GB8978-1996)"二级标准和"辽宁省污水综合排放标准(DB21.1627-2008)";急性毒性的检测表明,经过该工艺处理后出水为低毒性;三维荧光谱分析(EEM)表明,制药综合废水经生物处理后的可溶性有机物中仍然存在难降解物质,建议增加物化处理以提高处理效果;并且制药废水经处理后的出水中的盐度对排入的生态系统存在风险,建议纳入排放标准以加强管理。     

Enhancement of UV and chromate mutagenesis by nickel ions in the Chinese hamster HGPRT Assay †

1. The HGPRT (Hypoxanthine‐Guanine‐Phospho‐Ribosyl‐Transferase) assay with Chinese Hamster V79 cells was used to measure the mutagenic effects of UV irradiation, potassium dichromate and nickel chloride. The agents were tested separately and in the combinations of UV plus nickel and dichromate plus nickel.

2. UV, Cr(VI) and Ni(II) were confirmed to be mutagenic in the V79 cell assay. The combination of UV(5J/m²) and Ni(II) (0.5 mM) caused a mutation rate 11.2 times above that corresponding to the sum of the individual mutation rates of these agents. The combined action of Cr(VI) (0.1 mM) and Ni(II) (0.5 mM) produced a mutation rate 2.8 fold above that corresponding to the sum of the individual rates of the separate agents.

3. The enhancing effect of nickel chloride on the mutagenicity of UV or Cr(VI) is interpreted by an interference of Ni(II) with the repair of DNA lesions.     

气体、粉尘爆炸灾害及其安全技术

对可燃性气体、蒸汽、粉尘的爆炸特性及其抑爆、隔爆安全技术进行了系统的研究 ,并对常见的可燃性气体、蒸汽和粉尘的各种爆炸特性参数和气体抑爆安全技术参数进行了实验测定。根据实验测定结果得到的结论对这种可燃性物质的安全应用具有重要的参考价值     

Evaluation of Material Biodegradability in Real Conditions–Development of a Burial Test and an Analysis Methodology Based on Numerical Vision

This work validated a burial protocol for in situ testing and presents a robust, repeatable and time-saving technique to measure degraded areas in the sample, i.e. an image analysis method. 1440 specimens of degraded samples have been compiled in a data base. To this end, twenty samples presenting different levels of biodegradability (i.e. PHBV/HV, PLA, PCL, PCL-Starch, paper, PE, PE-Starch) were buried at 4 different locations and then disinterred at 4, 6, 9, 12, 18, and 24-month intervals. The biodegradation levels of these samples were determined by computing weight and area loss. Weight loss was measured after careful cleaning, whereas area loss was quantified using image analysis. Image analysis gives reliable information on visual pollution while only requiring a rudimentary and thus quicker cleaning of the samples.     

Surfactant-based oil dispersant toxicity to developing nauplii of Artemia: effects on ATPase enzymatic system

The paper deals with the toxicity of a surfactant-based oil dispersant to the ATPase activities of two naupliar stages of Artemia (instar I & II). Both instars were exposed to sub-lethal and lethal concentrations derived from acute toxicity data. The chosen concentrations were near to LOECs and NOECs. An eightfold difference indicated between the instars was instar-exposure time dependent. The most prominent effects were the inhibition and the stimulation of Na⁺/K⁺-ATPase and Mg²⁺-ATPase activities, respectively. The cause of these effects was related to the dispersant components, the surfactants. The pattern stimulation/inhibition of Mg²⁺-ATPase and Na⁺/K⁺-ATPase activities could be used to indicate toxic stress by surfactant-based oil dispersants since previous studies with other contaminants have shown different ATPase activity patterns.     

A model testing study for the transfer of radioactivity to fruit

This paper compares predictions of the foodchain model SPADE with experimental data for the transfer of (134)Cs and (85)Sr to strawberry plants following acute foliar and soil contamination. The transfer pathways considered in this exercise included direct deposition to fruit, leaf-to-fruit, soil-to-leaf and soil-to-fruit transfers. Following foliar contamination, the difference between predicted and measured radionuclide activity values varied between a factor of 0.5-10 for fruit and 4.5-7 for leaf. Following soil contamination, the difference between predicted and measured values varied between a factor of 3-74 for fruit and 32-44 for leaf. In all cases the difference between measured and predicted values was smaller for (85)Sr than (134)Cs. Measured and predicted activities were higher for leaf than fruit. Both measured and predicted (134)Cs concentrations in fruit and leaf are higher when deposition occurs at ripening than at anthesis. These results confirm the need for more data on fruit, even for Cs and Sr, to support models in predicting the transfer of radionuclides to fruit crops. Ongoing research projects funded by the UK Food Standards Agency aim to provide some data on radionuclide transfer to herbaceous, shrub and tree fruits, which will help improve radiological assessment models in order to provide better protection for consumers.     

THE EFFECT OF DATA INDEPENDENCE IN MODEL CALIBRATION AND MODEL TESTING1

ABSTRACT: With the increased use of models in hydrologic design, there is an immediate need for a comprehensive comparison of hydrologic models, especially those intended for use at ungaged locations (i.e., where measured data are either not available or inadequate for model calibration). But some past comparisons of hydrologic models have used the same data base for both calibration and testing of the different models or implied that the results of model calibration are indicative of the accuracy at ungaged locations. This practice was examined using both the regression equation approach to peak discharge estimation and a unit hydrograph model that was intended for use in urban areas. The results suggested that the lack of data independence in the calibration and testing of regression equations may lead to both biased results and misleading statements about prediction accuracy. Additionally, although split-sample testing is recognized as desirable, the split-samples should be selected using a systematic-random sampling scheme, rather than random sampling, because random sampling with small samples may lead to a testing sample that is not representative of the population. A systematic-random sampling technique should lead to more valid conclusions about model reliability. For models like a unit hydrograph model, which are more complex and for which calibration is a more involved process, data independence is not as critical because the data fitting error variation is not as dominant as the error variation due to the calibration process and the inability of the model structure to conform with data variability.     

REGIONAL DETECTION OF CHANGE IN WATER QUALITY VARIABLES1

ABSTRACT: The detection of change in a hydrologic varaible, particularly water quality, is a current problem. A method is presented for testing whether there has been a shift in the mean of a hydrologic variable based on the well established bivariate normal distribution theory. In this technique, the dependent, or target, and the independent, or control, variables are formed as weighted linear combinations of the mean values at a number of locations in a selected target and control area. The weighting factors are determined based on a mathematical programming technique which minimizes the conditional coefficient of variation thereby minimizing the number of observations required to detect a change of a preselected magnitude in the mean of the target area. The result is a situation where a savings in the number of observations required to detect a change is a consequence of adding more stations: the space-time tradeoff. Two applications of the technique are presented, the first using electrical conductivity (EC) data from two sets of river basins and the second using EC data from a set of basins as the target variable and annual discharge as the control. The results indicate that a significant savings in time can be achieved by using this method.