关于苏州数字环保移动办公系统的研建

文章着眼于信息化飞速发展的今天,阐述了苏州市环保系统无纸化办公的现状及发展趋势。在现有的办公自动化基础上,架构了一个从保证安全性角度出发的移动办公及执法方案,提出了一项建设环保系统高能效的新一代办公模式,为领导决策、应急响应、高效办公提供了一条新思路。     

Myoelectric manifestation of muscle fatigue in repetitive work detected by means of miniaturized sEMG sensors

Upper limb work-related musculoskeletal disorders have a 12-month prevalence ranging from 12 to 41% worldwide and can be partly caused by handling low loads at high frequency. The association between the myoelectric manifestation of elbow flexor muscle fatigue and occupational physical demand has never been investigated. It was hypothesized that an elbow flexor muscle fatigue index could be a valid risk indicator in handling low loads at high frequency. This study aims to measure the myoelectric manifestation of muscle fatigue of the three elbow flexor muscles during the execution of the work tasks in different risk conditions. Fifteen right-handed healthy adults were screened using a movement analysis laboratory consisting of optoelectronic, dynamometer and surface electromyographic systems. The main result indicates that the fatigue index calculated from the brachioradialis is sensitive to the interaction among risk classes, session and gender, and above all it is sensitive to the risk classes.     

Experimental Investigation on the Removal of Toner Particles from Laser-Printed Office Waste Papers

Abstract

In this work the deinking process was simulated in a small high speed blender of about 2 L capacity. The effects of polyethylene (PE) and wax-coated PE on the removal of toner particles in the pulper slurry has been experimentally investigated. The effect of one commercial surfactant (30% anionic, 5% nonionic) on the toner release efficiency was also studied. The average area of toner particles retained on filter papers were determined using an image analysis system that consists of a high-resolution video camera mounted on an optical polarizing microscope, an image software processor, a Pentium PC, and a high-resolution image monitor. The effect of low density PE on toner detachment from laser-printed standard paper was investigated over a concentration range of 0 –200% PE (relative to paper mass). It is found that PE has a certain capabilty of removing (adsorbing) toner particles. In the second phase of this research work, the effect of wax-coated PE was investigated. It was found that wax-coated PE enhances the removal of toner particles beyond that obtained using only PE. Finally, the effect of a commercial surfactant on the release of toner particles have been investigated over a range of surfactant mass percentage (relative to the paper mass).     

Characteristics of the Workforce and Activity Optimization in the Building Industries of Lithuania

The evaluation of human individual characteristics is very important for any ergotechnical system optimization, especially in occupational safety. Investigations were carried out for this purpose. An important classification of ergonomic characteristics for construction workers was prepared. The importance and relevance of the choice of those characteristics as well as their application are presented in the article.     

Physical Strain and Work Ergonomics in Farmers with Disabilities

In agriculture, occupational injuries are common, and several of them lead to permanent physical disability. The objective of this case study was to assess the strain and the ergonomic needs of four farmers (aged 34–49 years) with physical disabilities. A maximal bicycle ergometer test or an arm-crank test was done to assess their maximal heart rate (HR _max) and maximal oxygen consumption (V0_2max). The strain at work was analyzed by measuring heart rate (HR), muscle activity (EMG), and the rating of perceived exertion (RPE). The farmers were interviewed as to possible and impossible work tasks and the ergonomic redesign measures taken to improve the work environment. The work tasks performed were mainly light or moderate work for the cardiorespiratory system according to mean HR (88-102 beats/min), the percentage of HR range (17–31% HRR), and the relative V0₂ (22–46% V0_2max). The mean activity of the trapezius muscles was 0.4-9% of the maximal voluntary contraction (%MVC). All the participants had work tasks they were unable to perform. They had made ergonomie redesign changes mainly to the tractor. This case study showed that some agricultural work tasks were possible for farmers with physical disabilities and that the physical strain associated with these tasks was mainly light or moderate.     

Job Redesign Needs for Aged Workers

The aim of this paper is to explore and present a proposal for redesigning elements of the workplace for agech workers. The method of research was to observe, record, and measure the actions of sitting workers performing assembly operations on electrical products in the Kani Plant Nagoya Works of Mitsubishi Electric Co. (Japan). The evaluation index used in the experiment was obtained by measuring time motion elements, cycle time per product, and motion velocity waves of elderly workers. Those motion characteristics were then compared to the motion characteristics of young workers. The results led to job redesign elements being identified to reduce handling factors of high difficulty for aged workers and to the necessity to consider a coefficient of correction in Method Time Measurement (MTM) according to differences in the manufactured object’s weight.     

Synergism of Ergonomics,Safety, and Quality—A Behavioral Cybernetic Analysis

Abstract

This report extends a control systems or cybernetic model of behavior to the behavior of groups of many individuals—organizations and institutions—operating together with technology as complex sociotechnical (ST) systems. The premise is that the level of quality in performance of a complex ST system is predicated upon the degree to which its organizational design incorporates elements of a closed-loop behavioral control system: control goals and objectives, sensory receptors, sensory feedback, learning and memory, effectors, and sensory feedback control. From a control systems perspective, ergonomics is essential to effective organizational self-regulation. If working conditions are poorly designed, work performance and safety and quality outcomes cannot be closely controlled. Conversely, as shown by field evidence, good design promotes synergism between ergonomics, safety, and quality as a closed-loop consequence of effective employee and organizational self-control of system performance, safety, and quality.     

An Analysis of Work Environments and Operations in Hot and Humid Areas

Crews on tankers traveling and hauling cargo on the lower reaches of the Mississippi River during the hot and humid (H&H) summer season face various occupational safety and ergonomics problems. Evaluation of medical data reveals that a large number of the crewmembers experience job related injuries, diseases, disorders, and exhaustion as a result of adverse environmental conditions (National Institute for Occupational Safety and Health [NIOSH], 1993). The accidents and injuries that occurred were characterized and then analysis was used to recommend constructive remedies and solutions. The results were also used to design and develop better work environments on the tankers and in the general industry. In H&H conditions, the body’s chemical reactions constantly change in order to maintain the best possible reaction to changing environments. This chemical reaction increases blood flow to the skin through sweating. Body metabolism stabilizes body temperature through muscular work and convection, evaporation and radiation remove heat.     

A ventilation cooling shirt worn during office work in a hot climate: cool or not?

The aim of the study was to identify whether a ventilation cooling shirt was effective in reducing heat strain in a hot climate. Eight female volunteers were exposed to heat (38?°C, 45% relative humidity) for 2?h with simulated office work. In the first hour they were in normal summer clothes (total thermal insulation 0.8?clo); in the second hour a ventilation cooling shirt was worn on top. After the shirt was introduced for 1?h, the skin temperatures at the scapula and the chest were significantly reduced (p?<?0.05). The mean skin and core temperatures were not reduced. The subjects felt cooler and more comfortable by wearing the shirt, but the cooling effect was most conspicuous only during the initial 10?min. The cooling efficiency of the ventilation shirt was not very effective under the low physical activity in this hot climate.     

A Comparative Ergonomics Postural Assessment of Potters and Sculptors in the Unorganized Sector in West Bengal,India

Potters and sculptors perform their work in very awkward postures. The purpose of this study was to analyse these postures. The modified Nordic questionnaire was used to analyse musculoskeletal discomfort. Rapid entire body assessment (REBA) and rapid upper limb assessment (RULA) were used to evaluate the subjects’ postures. There were no significant differences between times of discomfort and the group of subjects. However, there were significant differences in discomfort in different body parts. The analysis indicated that various body postures were harmful to the subjects and that there were profound deviations from natural curvature of various body parts due to awkward body postures. Ergonomics intervention was required to improve the quality of life.