Space-time analysis of the changing patterns of population pressure on the ecological environment in China

This paper examines the temporal change and spatial variation of population pressure on the ecological environment in China. We have collected sufficient data from the statistical yearbooks of 31 provincial administrative areas in 1990, 1995, 2000, 2005, and 2010. Using a geographic information system (GIS) and relevant models, we analyzed the trend of the population pressure on ecological environment and the change of the gravity center of ecological environment quality. We conclude that: (1) generally, population pressure on the ecological environment in China was becoming higher during 1990–2010, especially in some areas where the population and environment were in serious imbalance and the ecological environment experienced severe pollution; (2) during a certain period, population pressure on the ecological environment was becoming lower in some areas, but the ecological environment was getting worse; (3) the areas with super-high population pressure on the ecological environment were Beijing, Tianjin, and Shanghai; (4) the gravity center of population pressure on the ecological environment and the center of ecological environment quality move differently during the study time period, but the general trend was similar – both of them were moving from west to east. Based on the analysis, this paper also provides some policy suggestions on the control of ecological environment quality.     

Effect of working time on environmental pressures: empirical evidence from EU-15, 1970–2010

There is growing interest in the correlation between working time and environmental pressures, but prior empirical studies mostly focused on static methodologies. This article used dynamic panel regression approaches to examine and compare the relationship among western, southern, and northern European countries over the period 1970–2010, and proved the existence of strongly significant relationships in all models. Furthermore, this article detected the relationship between working hours and environmental indicators (carbon emission and energy use) at different phases. We contribute to a further understanding of the environmental effects of the working time reduction policy by comparing the differences among various periods and country groups in a system generalized method of moments (GMM) dynamic framework.     

有机化学品不同温度下(过冷)液体蒸气压预测模型的建立与评价

(过冷)液体蒸气压(PL)是评价化学品在环境中分配、迁移和归趋行为的重要参数。PL具有较强的温度依附性。发展一种能够精确预测不同环境温度下化学品PL的方法,有助于填补化学品生态风险评估的大量数据缺失。本研究收集整理了661种有机化合物在不同温度下(200~830 K)共计10 478个log PL值。在此基础上,采用偏最小二乘(PLS)回归和支持向量机(SVM)方法,构建了PL的线性和非线性预测模型。结果表明:2种模型均具有良好的拟合度、稳健性及预测能力,SVM模型的预测性能略高于PLS模型(PLS:R2adj.tra=0.912,RMSEtra=0.477,Q2ext=0.910;SVM:R2adj.tra=0.997,RMSEtra=0.092,Q2ext=0.967)。机理分析表明,温度是影响PL的主要因素,温度越高,蒸气压越大;其次,X1sol也影响PL大小,X1sol用来描述分子间的色散作用,分子间色散力越小,蒸气压越大;此外,化合物的氢键个数、极性和分子构型等因素也影响PL大小。采用Wiliams plot方法表征了PLS模型应用域。所建立的模型可用来预测烷烃、烯烃、醇、酮、羧酸、苯、酚、联苯、卤代芳香烃、含N化合物及含S化合物在不同温度下的PL数据。     

小煤柱巷道围岩变形的力学机理及演化过程研究

为研究小煤柱巷道围岩变形力学机理与演化过程,以石槽村矿某回风巷为研究对象,采用理论分析、FLAC3D数值模拟以及现场实测等方法,分析小煤柱条件下巷道围岩变形的主要影响因素以及表征特点。研究结果表明:侧压系数为巷道围岩变形的主控因素;侧压系数与巷道顶底板位移量呈正比关系,与两帮位移量呈反比关系;回风巷每次受采动影响时,变形可分为巷道稳定阶段、位移分化阶段以及位移加速变化阶段;围岩变形主要发生在一次采动影响时,此时巷道变形呈现明显的不对称,左右两帮的位移量差异明显,巷道的中心位置明显偏移。研究结果可为小煤柱巷道围岩支护提供技术参考。     

Mycological assessment of sediments in Ligurian beaches in the Northwestern Mediterranean: pathogens and opportunistic pathogens

Sediments of five Ligurian beaches in compliance with European Union bathing water regulations were studied based on the characteristics of the fungal assemblage during the tourism season. Among the 179 taxa of filamentous fungi isolated, 120 were opportunistic pathogens, such as Acremonium sp., and the genus Penicillium was also present as the pathogenic species P. citrinum. Furthermore, 5% of the total filamentous fungi belonged to the dermatophyte genus Microsporum, whose species can cause mycoses. Beach sediments showed elevated densities of opportunistic pathogens, of pathogenic filamentous fungi, and of yeasts during the tourism season. Although monitoring of beach sediments for microbiological contamination is not mandatory, and disease transmission from sediments has not yet been demonstrated, our study suggests that beach sediments may act as a reservoir of potential pathogens, including fungi. In addition, the mycoflora displayed high sensitivity to critical environmental situations in the beaches studied. Therefore, the fungal community can be a useful tool for assessing the quality of sandy beaches in terms of sanitary and environmental quality.     

血压监护系统的电路分析和印刷电路板设计

本文介绍了血压监护系统的电路设计,其中前端电路的设计采用差分多级放大电路,达到放大的效果。应用PSpice软件对滤波电路进行了仿真,得到了带通滤波器的通带频率,验证了滤波器设计的可行性。同时本文对血压监护系统印刷电路板中电磁兼容问题进行了研究,对血压监护系统电路板的布局布线规则进行了规划和设计。     

电子信息行业的水环境压力分析

电子信息行业长期以来都被定义为一个“高产值、低能耗”的清洁产业,其水环境压力经常被低估.以长三角电子信息产业集群的核心地区太湖流域为例,对电子信息行业的水资源消耗、废水和主要污染物排放以及危险废弃物的处置等方面进行了评估,发现高度集聚的巨大产能与特定区域水环境容量的矛盾、污染的产业链转移以及处于“微笑”曲线底部引致的环境投入压力是我国电子信息行业水环境压力的主要表现.     

Sewage sludge disintegration by high-pressure homogenization: A sludge disintegration model

High-pressure homogenization (HPH) technology was applied as a pretreatment to disintegrate sewage sludge. The effects of homogenization pressure, homogenization cycle number, and total solid content on sludge disintegration were investigated. The sludge disintegration degree (DDCOD), protein concentration, and polysaccharide concentration increased with the increase of homogenization pressure and homogenization cycle number, and decreased with the increase of sludge total solid (TS) content. The maximum DDCOD of 43.94% was achieved at 80 MPa with four homogenization cycles for a 9.58 g/L TS sludge sample. A HPH sludge disintegration model of DD_COD= kN^aP^b was established by multivariable linear regression to quantify the effects of homogenization parameters. The homogenization cycle exponent a and homogenization pressure exponent b were 0.4763 and 0.7324 respectively, showing that the effect of homogenization pressure (P) was more significant than that of homogenization cycle number (N). The value of the rate constant k decreased with the increase of sludge total solid content. The specific energy consumption increased with the increment of sludge disintegration efficiency. Lower specific energy consumption was required for higher total solid content sludge.     

一种适用于深水压试验的传压隔热装置设计

目的真实高效地进行深水压环境的温度模拟。方法提出一种深水压试验压力加载过程中的恒温实现方法,通过开展基于皮囊的结构设计、密封性设计、导热性研究等工作,设计一种适用于深水压试验的传压隔热装置,对其进行理论分析和仿真计算。结果该装置可以实现液体温度在较长时间内基本恒定,具有良好的传压隔热性能。结论在建立的实验系统上进行了试验研究,实现了深水压环境模拟试验中压力载荷同步条件下液体温度小范围恒定功能,该技术为深水压环境试验的相关技术研究提供了技术储备。     

油田用钨合金镀层腐蚀性能评价研究

目的评价钨合金镀层油管的腐蚀性能。方法利用高压釜模拟高压气井和高含硫气井的腐蚀环境,进行高压高温腐蚀试验,以及标准的氢致开裂(HIC)和硫化氢应力腐蚀试验。采用电子扫描显微镜(SEM)及其能谱仪(EDS)和X射线衍射分析仪(XRD),分析或检测钨合金镀层和基管的腐蚀形貌、腐蚀产物的组成。结果油管表面的钨合金镀层平整而致密,其主要组成元素为W和Ni。高温高压腐蚀试验后,镀层仍然致密平整,腐蚀程度轻微。在60、90、120、140℃试验7天时,镀层和基材的H_2S/CO_2腐蚀速率分别为0.0179、0.0093、0.0102、0.0369 mm/a和1.030、1.272、1.183、0.991 mm/a。试验30天,在120℃时,其H_2S/CO_2腐蚀速率分别为-0.0085、0.1789 mm/a;在160℃时,其CO_2腐蚀速率分别为0.0091、0.8976 mm/a。该钨合金镀层均通过了标准的氢致开裂和硫化氢应力腐蚀试验。结论该钨合金镀层具有很好的耐腐蚀性能。