发酵制药废水二级出水中溶解性有机物特性分析

溶解性有机物（DOM）是发酵制药废水二级生化尾水深度处理工艺的主要去除对象,深入解析废水中DOM的特性是将其有效去除的前提和关键.本研究采集氨基酸类、头孢类、抗生素类、维生素类、阿维菌素类5种发酵制药废水二级出水,通过XAD-8树脂亲疏水性分离、凝胶色谱分子量分级、傅里叶变换红外光谱和三维荧光表征对二级出水中的DOM进行特性分析.结果表明,5种发酵制药废水二级出水的盐度和色度高,废水中有机物浓度高、波动大（48.60~245.40 mg·L^-1）.DOM大多数以疏水性组分为主,分子量分布广泛（210~10000 Da）.二级出水DOM均含有大量的不饱和双键、苯环结构,同时含有—OH、—NH₂和C=O等发色团和助色基团,造成废水色度较高.通过对发酵制药废水二级出水进行EEM-PARAFAC分析确定了4种荧光组分特征峰,包括3种腐殖质类（C1、C3、C4）和1种类蛋白类组分（C2）.发酵制药废水二级出水中DOM主要是以类腐殖质有机物为主（C1、C3）.全方面识别和解析发酵制药废水DOM的组成,可为废水深度处理工艺的优化提供指导.     

An Evaluation of the NIOSH Lifting Equation: A Psychophysical and Biomechanical Investigation

Using the results of psychophysical and biomechanical experiments, NIOSH (National Institute for Occupational Safety and Health) Recommended Weight Limit (RWL), the Lifting Index (LI), the form of the asymmetry multiplier, and the criterion for compression force were investigated. Analysis of the results indicated a significant difference between the NIOSH RWL and the reported Maximum Acceptable Weight of Lift (MAWL). Contrary to the NIOSH lifting equation, the form of the asymmetry multiplier was found to be non-linear. The overall average of peak compression force on the L5/S1 was 3685 N. Fifty-eight percent of all compression forces reported in the biomechanical experiment were found to exceed the suggested 3400 N set by NIOSH guidelines. These results support previous research findings on the validity of NIOSH guidelines.     

Handling Techniques: The Influence of Weight and Height for Experts and Novices

The purpose of this study was to evaluate the influence of the weight of the load (12 kg, 22 kg) and of the height of the grasp (high: 126 cm; middle: 64 cm and 95 cm; low: 33 cm) on the handling techniques adopted by six experienced handlers and six novices having only limited handling experience during a free box-handling task. Each subject had to transfer two sets of 16 boxes from a platform to a four-wheel cart. The observations dealt with the position of the subject at the beginning of transfer and at deposit (position of the back, knees and feet, pelvic orientation, position of the hands), his way of moving during the transfer (position of the feet), and his way of positioning and moving the box during handling (tilt of the box, impulse given to the box, grip change). The results show that the weight and the height of grasp/deposit had an influence on the techniques adopted by expert handlers and novices. Some of these variations are common to both groups but many of them are not, such as the position of the knees, the grips and the position of the box. This study suggests that there is not one method that is suitable for all situations, and that expert handlers may have learned how to adjust their methods to the working environment. A better understanding of the experts’ techniques could help in redesigning efficient training programs.     

基于熵权物元可拓模型的智慧档案馆安全评估

为了评估智慧档案馆的安全状况,预防安全事故发生,通过分析智慧档案馆的安全因素,构建了由8个一级指标、38个二级指标构成的智慧档案馆安全评估指标体系,并将信息熵理论和物元可拓理论有机结合,构建了智慧档案馆安全熵权物元多级可拓评估理论模型。应用该指标体系和理论模型对某档案馆进行了实证研究,得出其安全等级为V级(安全),为该馆针对性地提出了加强安全工作的整改建议。评估结果与实际情况一致,验证了该评估指标体系和评估理论模型的正确性和可靠性。     

浑河沈阳段污水排放口最优规划研究

针对沈阳市经济发展和污染加剧的特点,为合理充分利用浑河水环境容量,节约投资,建立了浑河沈阳段主要排污口最优化模型,并应用分段线性化对该模型进行了线性化,进而确定排污口最优化线性模型,最后通过M atlab软件求解出各排放口的污水允许排放浓度及最低的处理费用。     

Multiobjective optimisation method for life-cycle design of mechanical products

Manufacturing that minimises the exhaustion of natural resources, energy used and deleterious environmental impact is increasingly demanded by societies that seek to protect global environments as much as possible. To achieve this, life-cycle design (LCD) is an essential component of product design scenarios; however, LCD approaches have not been well integrated in optimal design methods that support quantitative decision-making. This study presents a method that yields quantitative solutions through optimisation analysis of a basic product design incorporating life-cycle considerations. We consider two types of optimisation approaches that have different aims, namely, (1) to reduce the use of raw materials and energy consumption and (2) to facilitate the reuse of the product or its parts when it reaches the end of its useful life. We also focus on how the optimisation results differ according to the approach used, from the viewpoint of the 3R concept (Reduce, Reuse and Recycling). Our method obtains optimum solutions by evaluating objectives fitted to each of these two optimisation approaches with respect to the product's life-cycle stages, which are manufacturing, use, maintenance, disposal, reuse and recycling. As an applied example, a simple linear robot model is presented, and Pareto optimum solutions are obtained for the multiobjective optimisation problem whose evaluated objectives are the operating accuracy of the robot and the different life-cycle costs for the two approaches. The characteristics of the evaluated objectives and design variables, as well as the effects of using material characteristics as design parameters, are also examined.     

模糊综合评判法在西部地区高速公路施工现场安全评判中的应用

目前随着高速公路建设的飞速发展,引发了施工现场的安全管理难度剧增,及时、正确地掌握和评判施工现场安全状况是预防和控制安全事故发生的有效途径。但公路施工领域安全评判涉及的因素很多,模糊性大、动态变化复杂是最显著的特性,因素之间互相作用使结果可变性很大,如何对受多种因素制约的事物或对象做出一个总体的评价是目前一个很重要的问题。模糊综合评判法可把定性评价转化为定量评价,能较好地解决模糊的、难以量化的问题。但由于该法使用的评语常带有模糊性,各影响因素的权重通常是专家凭经验给出,从而影响评判结果的客观性。而层次分析法适用于多方案或多目标的决策,可将定性与定量的分析相结合,可以减少评价中因主观性所带来的弊端,使评价结果更可信。本文在研究模糊综合评判法和层次分析法优缺点的基础上,将二者结合起来,建立西部地区高速公路施工现场安全状况评价的模型,利用该模型得出公路施工现场安全状况,为施工现场的安全管理和事故防治提供依据。     

变权综合法在航空公司风险评价中的应用研究

针对民航风险评价中大多数综合评价方法采取常权综合法,当评价指标体系中某些指标出现严重缺陷时,导致最终综合评价值与实际情况不符的现象,将变权综合法应用到民航风险评价中。给出变权综合法风险评价的基本步骤,以航空公司风险评价为例,建立评价指标体系,运用模糊数学知识对底层指标进行赋值,并对其进行标准量化,其次根据变权综合评价法的基本原理及民航行业高风险的特点,选择适合的状态变权公式,计算评价指标体系的状态变权及变权,最后由变权综合法的综合评价公式,计算出系统的风险评价值。通过与常权综合法的计算结果相比较,变权综合法能较好解决民航风险评价中常权综合法存在的问题,同时计算结果也验证了变权综合法的优越性、有效性和实用性。     

基于熵技术的尾矿库安全模糊综合评价体系研究

在以往对尾矿库安全评价时,常常只对尾矿库的地质情况、坝体结构、防洪能力和坝体稳定性等进行安全度计算,然后评价尾矿库安全性,但都未能全面综合地判定尾矿库的安全运行状况。针对尾矿库安全评价具有定性指标多、定量指标少、评价主观性过强、客观性偏弱等特点,建立涵盖坝体稳定性、排洪安全性、输送及排放安全性、监测可靠性、管理全面性为一级指标的尾矿库安全现状评价指标体系。利用信息论中熵的概念计算客观权重的方法,避免人为主观的影响,提出尾矿库安全模糊综合评价模型。应用该模型对陕西省某尾矿库的安全现状进行评价,根据评价结果并结合评价指标的权重探索尾矿库存在的安全隐患,为进一步整改提供理论依据,具有一定的使用价值。     

中国城市绿化评价系统比较分析

城市绿化在城市环境建设中起着至关重要的作用。为衡量城市绿化建设的水平和指导城市规划,有必要建立科学的绿化评价体系。分析和比较了中国现有的4种国家级城市绿化评价体系：国家园林城市标准、全国绿化模范城市标准、国家森林城市标准和国家生态园林城市标准,并从易得性、可比性、简易性、客观性等4个方面对具体的指标进行了分析。4种绿化...