Effects of significant damage of flame gap surfaces in flameproof electrical apparatus on flame gap efficiency

Electrical apparatus for use in the presence of explosive gas atmospheres has to be specially designed to prevent the apparatus from igniting the gas. Flameproof design is one of several options, and one requirement is then that any holes and slits in the enclosure wall be designed to prevent a possible gas explosion inside the enclosure from being transmitted to an explosive gas cloud outside it. Current standards (IEC) require that joint surfaces have a surface roughness of <6.3 μm. Any damaged joint surface has be restored to this quality. The present investigation has demonstrated that flame gap surfaces in flameproof electrical apparatuses can suffer considerable mechanical and corrosive damage before the flame gaps no longer function satisfactorily. In some cases very significant mechanical surface damage in fact improves the gap performance. This indicates that current high costs of repairing and replacing flameproof electrical apparatus in process plants offshore and onshore can be reduced considerably without any increase of the explosion risk.     

急倾斜煤层石门揭煤突出机理数值模拟研究

与其他类型的突出相比,石门揭煤的突出危险性最为严重,对它的突出机理进行研究有助于提高防突工作水平。根据马家沟矿石门揭煤突出后遗留的孔洞形状,采用数值模拟软件对突出过程进行反演分析;再现了马家沟矿石门揭煤突出发生的地质条件及发展过程。结果显示,急倾斜煤层石门揭煤突出过程中,煤体自重应力的作用比较明显;突出发生后,地应力梯度和瓦斯压力梯度均下降,卸压区宽度增大。因此,对于急倾斜煤层石门揭煤,一方面,要采取瓦斯抽放等措施,降低工作面前方煤体的应力和瓦斯压力;另一方面,要采用金属骨架对其上方煤体进行支护,防止该煤体垮落诱导突出。     

实验室煤与瓦斯突出模拟试验回顾及展望

为借鉴国内外煤与瓦斯突出模拟试验研究成果,查阅大量相关文献,进行分析和总结。以人们对煤与瓦斯突出试验研究的深入程度为主线,将实验室煤与瓦斯突出模拟试验的研究历程进行阶段划分。研究表明:20世纪50—60年代,成功诱导了突出,初步考察诸因素对突出的影响;70—90年代,深入探究突出发生的力学判据及突出过程,并提出数十种有关突出机理方面的假说;21世纪初,以组建三维模拟试验台进行试验为特点,大大提高了模拟试验条件与现场的相似度,但在力学加载系统的稳定性和可调性、模型的整体密封性、测试探头的精度等方面仍需改进。     

煤岩瓦斯复合动力灾害机理研究进展与展望

随着我国煤矿快速进入深部开采,煤岩瓦斯复合动力灾害日渐成为威胁深部煤炭安全高效开采的重大灾害,研究其发生机理成为煤矿安全领域新的重大科学问题。本文首先在调研统计的基础上,阐述我国煤岩瓦斯复合动力灾害的发生规律和主要破坏特征,从定性和初步定量研究角度对煤岩瓦斯复合动力灾害机理的研究现状进行综述分析,然后介绍笔者近年来在受载含瓦斯煤岩组合体耦合失稳诱发复合动力灾害机制方面的研究进展,最后展望煤岩瓦斯复合动力灾害机理研究中亟待解决的问题及未来研究方向。     

煤和瓦斯突出过程中瓦斯作用机理的研究

阐述了瓦斯在煤和瓦斯突出过程中所起的作用 ;指出煤层中瓦斯的存在改变了煤岩体的物理力学性质及响应特性 ,使之成为非稳定介质 ;特别强调在瓦斯突出发生时 ,瓦斯膨胀能起了至关重要的作用 ;由于瓦斯的存在 ,加剧了煤体失稳破坏的过程。     

污染土壤电动修复增强方法研究进展

污染土壤电动修复是一项新兴绿色原位修复技术。其原理是在土壤上施加直流电场 ,利用电迁移和电渗去除污染物 ,土壤pH、Zeta电位以及土壤化学性质等因素影响电动修复效果。为了提高修复效率和扩大电动修复应用范围 ,现在已经发展了针对不同类型土壤和污染物的增强修复技术。本文归纳总结了 1995年以来土壤电动修复中常用增强处理效果的 8种方法 ,即酸碱中和法、阳离子选择膜法、电渗析法、络合剂法、表面活性剂法、氧化 还原法、EK 生物联用和LasagnaTM法 ,且对每种方法的典型实验装置、增强原理、方法特点和适用范围等进行了分析和讨论 ,为以后的实验设计提供了有益的参考     

基于链式多重插补的WOA-ELM煤与瓦斯突出预测模型

为了提高缺失数据下煤与瓦斯突出预测准确率,提出1种基于链式支持向量机多重插补(MICE＿SVM)的鲸鱼优化算法(WOA)-极限学习机(ELM)预测模型,以淮南朱集矿区为例,选取5个煤与瓦斯突出影响指标作为模型特征,采用提出的MICE＿SVM算法插补突出事故数据中缺失值,利用WOA优选ELM输入层权值及隐含层阈值,构建煤与瓦斯突出预测模型,将插补后数据用于WOA-ELM模型的训练与测试,并与其他模型的预测效果对比。研究结果表明：MICE＿SVM插补前、后的有突出数据预测准确率分别为83.02%,90.41%,MICE＿SVM显著提高了有突出预测准确率,对无突出和整体的预测准确率提高不明显;数据插补后WOA优化ELM对无突出、有突出和整体的预测准确率分别为97.94%,96.25%,96.48%,较优化前分别提高了5.79%,5.84%,5.55%,数据插补后WOA-ELM为最佳预测模型。     

太湖草型湖区沉积物再悬浮对水体营养盐的影响

再悬浮过程中沉积物对水体营养盐的内源贡献是湖泊,特别是浅水湖泊富营养化研究中的重要问题.采用原位沉积物柱样和原状上覆水的Y型扰动装置,被用来研究常规风情下太湖草型湖区沉积物的再悬浮和沉降过程对水体营养盐负荷的影响.结果表明,小风和中风的再悬浮过程导致水体氨氮和磷酸根磷含量显著下降,单位面积水柱含量最大变化量分别为-0.140 g·m-2和-1.59 mg·m-2;大风条件下,水体氨氮含量下降幅度很小,磷酸盐则出现明显增加趋势,最大增量为0.81mg·m-2.再悬浮过程之后的沉降过程中,中、小风条件的水体氨氮含量变小,大风条件的含量没有明显变化.磷酸根磷含量在中、小风条件下与风浪前差别较小,大风条件的含量则明显增大,最大增量为1.36 mg·m-2.因此,沉积物的再悬浮过程和沉降过程对上覆水体的营养盐动态负荷都产生重要影响.与太湖无植被湖区的研究结果对比说明,水生植物的存在对风浪作用下沉积物与上覆水的物质交换有一定的抑制作用.     

Influence of thermal environment on metallographic structure characteristics of the electric arc bead pattern

Electrical apparatuses are prone to arc, which generally causes a fire, even an explosion hazard, when a flammable gas mixture is present, especially during industrial processes. Terrible fire scenes are challenging for fire investigations. In this work, by performing a simultaneous thermal analysis test we simulated a fire environment and found that as the oxygen concentration decreased, the oxidation/exothermic peak temperature of ‘cause’ bead became higher, but the melting temperature was unaffected. Results indicated that the bead pattern underwent oxidation at approximately 831 °C, melting initiated at approximately 1060 °C, and the pattern then disappeared. The melted pattern grain changes were divided into three critical temperature stages: Approximately 600 °C, the onset temperature at which the melted pattern grains began to be equiaxed; approximately 831 °C, at which the grains were interspersed with oxygen-containing material; and 831–1060 °C, when the grains disappeared, which is a criterion for identifying electrical fires. However, the boundaries remained throughout the thermal environment process. Moreover, the bead pattern demonstrated three metallographic regions: Deep layer (Region I), the intermediate layer (Region Ⅱ), and surface layer (Region Ⅲ). Region I was the most thermally sensitive, in which equiaxed crystals first appeared. Region Ⅲ was the thermal reaction lag zone, in which the typical branching crystals finally disappeared, and Region Ⅱ was intermediate between Regions I and Ⅲ. The results may help fire investigators determine the fire scene temperature stages and provide support for fire evidence extraction.     

长春地震台数字地震仪近震速报震级偏差研究

本次研究选用了长春地震台2000年至2004年近震速报资料,重新测算了数字地震仪近震震级,并以《吉林省地震目录》给出的震级为标准震级,进行了震级偏差统计分析。研究结果表明,随着震中距的变化长春地震台震级偏差变化较大,为使校正值精度提高,我们分段给出了长春台数字化地震仪水平向记录近震震级台站校正值。