改良A~2/O工艺预缺氧池中的脱氮作用和机理

改良A2/O工艺中预缺氧池有较强的脱氮作用,其脱氮作用占整个系统氮去除率的15.11%。通过对预缺氧池氮元素进行物料平衡,分析和证实改良A2/O预缺氧池中可以发生厌氧氨氧化反应,可以有效减少能耗和降低运行成本,这对我国污水厂的改造,提高出水水质,具有积极意义。     

活性污泥法处理甲苯废气吸收液的研究

以甲苯废气吸收液为研究对象,利用活性污泥法降解吸收液中的污染物,研究了吸收液与生活污水混合比,重点分析了反应体系降解中污染物COD、SS、SCOP和甲苯的浓度变化。实验结果表明,当吸收液与生活污水体积比为5:95,曝气量5L/min,连续曝气4h的条件下,COD、SS、SCOP和甲苯的去除率达到77.18%、94.59%、100%和89.47%,甲苯的好氧降解符合准一级动力学方程。     

SBR工艺在城市污水处理厂的应用

以SBR新工艺应用于抚顺市三宝屯污水处理厂为例,介绍了该工艺的主要性能特点、关键技术处理及工程设计思路,探讨了在实际应用中应关注的问题,并提出相应的措施。     

Pollutants removal and simulation model of combined membrane process for wastewater treatment and reuse in submarine cabin for long voyage

A laboratory scale test was conducted in a combined membrane process (CMP) with a capacity of 2.91 m3/d for 240 d to treat the mixed wastewater of humidity condensate, hygiene wastewater and urine in submarine cabin during prolonged voyage. Removal performance of chemical oxygen demand (COD), ammonia nitrogen (NH4 +-N), turbidity and anionic surfactants (LAS) was investigated under di erent conditions. It was observed that the e uent COD, NH4 +-N, turbidity and LAS flocculated in ranges of 0.19–0.85 mg/L, 0.03–0.18 mg/L, 0.0–0.15 NTU and 0.0–0.05 mg/L, respectively in spite of considerable fluctuation in corresponding influent of 2120–5350 mg/L, 79.5–129.3 mg/L, 110–181.1NTU and 4.9–5.4 mg/L. The e uent quality of the CMP could meet the requirements of mechanical water and hygiene water according to the class I water quality standards in China (GB3838-2002). The removal rates of COD, NH4 +-N, turbidity and LAS removed in the MBR were more than 90%, which indicated that biodegradation is indispensable and plays a major role in the wastewater treatment and reuse. A model, built on the back propagation neural network (BPNN) theory, was developed for the simulation of CMP and produced high reliability. The average error of COD and NH4 +-N was 5.14% and 6.20%, respectively, and the root mean squared error of turbidity and LAS was 2.76% and 1.41%, respectively. The results indicated that the model well fitted the laboratory data, and was able to simulate the removal of COD, NH4 +-N, turbidity and LAS. It also suggested that the model proposed could reflect and manage the operation of CMP for the treatment of the mixed wastewaters in submarine.     

气溶胶质谱仪在研究有机气溶胶环境微界面过程中的应用

有机气溶胶非均相和多相反应是复杂的微界面过程,它涉及气体的吸附、扩散、反应和解吸,传统的化学分析仪器不能提供完整实时的微界面过程的化学反应信息.气溶胶质谱仪是近年来发展起来用于实时分析颗粒物化学组分的重要仪器,它弥补了传统化学分析仪器,如GC/MS在实时分析上的不足,为研究有机气溶胶非均相化学反应的微界面过程提供了新的方法.本文旨在介绍气溶胶质谱仪的结构及其在研究有机气溶胶环境微界面过程中的应用.     

海上溢油扩散图像处理的非线性方法研究

针对海上溢油应急处理问题,本文主要对溢油的初级行为--扩散进行探讨.提出了采用溢油扩散图像来预测溢油扩散未来发展趋势的3步非线性处理过程,即图像边缘检测、面积计算和面积预测,对这一过程中应采用的方法进行了分析与比较.并以奥里油在静止海水中扩散为范例,在MATLAB环境下,利用非线性方法对扩散图像进行边缘监测,通过对梯度算子阀值的调整来计算完整的油膜覆盖面积,并将其计算结果进行BP神经网络预测.结果表明:采用Roberts边缘算子可以得到很好的边缘检测结果,采用BP神经网络获得的面积预测结果与实验结果吻合程度较好.     

基于仿真的新建污水处理厂工艺参数调试

基于ASM2D模型建立了上海某新建污水厂倒置AAO流程的数学模型,并采用该厂进、出水设计数据对模型进行校正,其中,ASM2D各组分浓度分布参考文献值.同时,通过仿真计算研究了不同温度下进水流量、污泥回流比、混合液回流比及进水流量分配比对出水总化学需氧量（TCOD）、氨氮（SNH3）、总氮（TN）、总磷（TP）及总悬浮颗粒物（TSS）的影响.结果表明,研究获得的定性和定量两方面结果可供该厂在工艺参数调试中作参考.计算机仿真技术在新建污水厂工艺参数调试中的应用可以减少调试时间,降低调试费用,取得良好的经济效益与环境效益.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

滨海石化项目环境综合风险评估方法研究

研究针对国内目前的研究现状,运用环境风险评价指数法建立滨海石化项目环境风险评估体系,采用层次分析法和熵权法结合的组合赋权法,结合专家咨询法进行指标的修改与完善,运用线性加权组合法对评估体系中指标权重的赋值,并计算滨海石化项目的环境风险等级,确定项目的风险强弱.实例分析表明环境风险管理在环境风险的产生和预防占有十分重要的地位,通过加强和完善环境风险的管理体系,结合环境因素的敏感程度及风险源的产生和影响,能降低环境风险及事故的影响程度.     

A^2O脱氮除磷工艺及其变型工艺比较分析

传统的A2O工艺及其变型工艺,由于工艺流程简单、控制方便、运行费用低等特点,目前仍广泛应用于污水处理的脱氮除磷。对传统的A2O工艺及其变型工艺的原理和特点进行了系统归纳和比较分析。