Developing Mechanism of Rubber-tea-chicken Agro-forestry Model in Tropical Area of China

As a typical tropical agro-forestry ecosystem in Wenchang,Hainan Province,China,rational mechanisms of the rubber-tea-chicken eco-agricultural model were studied with the Solow technological level index,stability indicator,harmonizing coefficient,grey correlation coefficient and production dominance.This study focused on rational hierarchical structure,the limiting factors and optimal strategies of the model development based on model structure,resource conditions and external market demands.Results showed that rational mechanism of the rubber-tea-chicken ecosystem model mainly included technological contributions,leverage function of dominance component(livestock husbandry),stability of the model structure and harmony of its components,the model dominant product’s market demand and government’s supporting policies.The contributions of fund,technology,information and talent resources played an important role in improving sustainability and productivity of the agro-forestry model.     

Detection of tritium sorption on four soil materials

In order to measure groundwater age and design nuclear waste disposal sites, it is important to understand the sorption behavior of tritium on soils. In this study, batch tests were carried out using four soils from China: silty clays from An County and Jiangyou County in Sichuan Province, both of which could be considered candidate sites for Very Low Level Waste disposal; silty sand from Beijing; and loess from Yuci County in Shanxi Province, a typical Chinese loess region. The experimental results indicated that in these soil media, the distribution coefficient of tritium is slightly influenced by adsorption time, water/solid ratio, initial tritium specific activity, pH, and the content of humic and fulvic acids. The average distribution coefficient from all of these influencing factors was about 0.1-0.2 mL/g for the four types of soil samples. This relatively modest sorption of tritium in soils needs to be considered in fate and transport studies of tritium in the environment.     

Inhalation dose assessment of indoor radon progeny using biokinetic and dosimetric modeling and its application to Jordanian population

High indoor radon concentrations in Jordan result in internal exposures of the residents due to the inhalation of radon and its short-lived progeny. It is therefore important to quantify the annual effective dose and further the radiation risk to the radon exposure. This study describes the methodology and the biokinetic and dosimetric models used for calculation of the inhalation doses exposed to radon progeny. The regional depositions of aerosol particles in the human respiratory tract were firstly calculated. For the attached progeny, the activity median aerodynamic diameters of 50 nm, 230 nm and 2500 nm were chosen to represent the nucleation, accumulation and coarse modes of the aerosol particles, respectively. For the unattached progeny, the activity median thermodynamic diameter of 1 nm was chosen to represent the free progeny nuclide in the room air. The biokinetic models developed by the International Commission on Radiological Protection (ICRP) were used to calculate the nuclear transformations of radon progeny in the human body, and then the dosimetric model was applied to estimate the organ equivalent doses and the effective doses with the specific effective energies derived from the mathematical anthropomorphic phantoms. The dose conversion coefficient estimated in this study was 15 mSv WLM⁻¹ which was in the range of the values of 6-20 mSv WLM⁻¹ reported by other investigators. Implementing the average indoor radon concentration in Jordan, the annual effective doses were calculated to be 4.1 mSv y⁻¹ and 0.08 mSv y⁻¹ due to the inhalation of radon progeny and radon gas, respectively. The total annual effective dose estimated for Jordanian population was 4.2 mSv y⁻¹. This high annual effective dose calculated by the dosimetric approach using ICRP biokinetic and dosimetric models resulted in an increase of a factor of two in comparison to the value by epidemiological study. This phenomenon was presented by the ICRP in its new published statement on radon.     

基于变异系数法的安徽省节能减排评价研究

以行政区域为单位进行节能减排评价研究,分析其中的影响因素,便于因地制宜地采取措施开展节能减排工作。本文以安徽省为研究对象,运用变异系数法对节能减排作评价研究。研究表明,节能减排总体成效显著,但减排问题突出,其中污染物排放与产业结构存在密切关系,进一步的关联分析得出影响减排的主要行业因素。据此,提出从调整产业结构、加强科技创新、完善法规政策方面推进节能减排。     

构建湘江流域生态补偿机制的探讨

本文以湘江水质和水文数据为基础,首次结合各地市社会经济发展情况,引入补偿标准系数,以湘江流域所在区域为例进行生态补偿资金测算,提出湘江流域生态补偿机制构建初步设想和存在的主要问题,以期为湘江流域水资源保护提供指导,最终实现湘江流域区域共赢。     

环境试验箱围护结构传热研究

通过对环境试验箱围护结构由高温降至低温时的非稳态传热过程建立物理模型和数学模型,并使用有限容积法及TDMA进行围护结构传热数值计算来分析3种不同降温工况下的围护结构的传热特性,提出了围护结构质量系数概念,用以简化计算其降温时的耗冷量.     

水环境质量评价3种方法的应用对比

从众多水质评价方法中选取单项指数法、加权均值型指数法、模糊数学法进行介绍,并通过运用这3种方法对大汶河某年监测数据的平均值进行评价.经对比分析发现,加权均值型指数法是一种比较实用的水质评价方法,模糊数学法可以作为必要的补充.     

砂土与EPS颗粒混合的轻质土(LSES)临界循环应力比的试验研究

循环荷载下,砂土与EPS颗粒混合的轻质土(LSES)存在临界循环应力比Sth,将割线弹性模量衰减系数δ与循环次数的关系曲线能保持平缓的最大循环应力比定义为Sth,它是结构稳定与破坏两种状态的界限指标,根据动三轴试验结果,认为影响Sth的主要因素有围压、水泥掺量和EPS颗粒含量。一般来说,水泥掺量的增加、围压和EPS颗粒含量的减小均会提高Sth,但由于高围压下的结构重塑,水泥掺量低且EPS颗粒含量高的试样的Sth表现出一些不同的性状。     

Polymer Barrier Films

Many polymers such as polyolefins (polyethylene, polypropylene), poly(vinyl chloride), aliphatic polyamides, poly(ethylene terephthalate), polycarbonate, and others are used as protective barrier films against the mass transport of small molecules of gases, vapors, and liquids (known as diffusates, permeants) in different applications. The barrier properties depend on the polymer characteristics such as solubility, diffusion, permeability, and others, the nature of the fluid, temperature, and other factors. Mainly polymer barrier film application in packaging, construction, and agriculture are discussed.     

Plant/soil concentration ratios for paired field and garden crops, with emphasis on iodine and the role of soil adhesion

In the effort to predict the risks associated with contaminated soils, considerable reliance is placed on plant/soil concentration ratio (CR) values measured at sites other than the contaminated site. This inevitably results in the need to extrapolate among the many soil and plant types. There are few studies that compare CR among plant types that encompass both field and garden crops. Here, CRs for 40 elements were measured for 25 crops from farm and garden sites chosen so the grain crops were in close proximity to the gardens. Special emphasis was placed on iodine (I) because data for this element are sparse. For many elements, there were consistent trends among CRs for the various crop types, with leafy crops > root crops ≥ fruit crops ≈ seed crops. Exceptions included CR values for As, K, Se and Zn which were highest in the seed crops. The correlation of CRs from one plant type to another was evident only when there was a wide range in soil concentrations. In comparing CRs between crop types, it became apparent that the relationships differed for the rare earth elements (REE), which also had very low CR values. The CRs for root and leafy crops of REE converged to a minimum value. This was attributed to soil adhesion, despite the samples being washed, and the average soil adhesion for root crops was 500 mg soil kg⁻¹ dry plant and for leafy crops was 5 g kg⁻¹. Across elements, the log CR was negatively correlated with log Kd (the soil solid/liquid partition coefficient), as expected. Although, this correlation is expected, measures of correlation coefficients suitable for stochastic risk assessment are not frequently reported. The results suggest that r ≈ −0.7 would be appropriate for risk assessment.