送风温度对三个污染源置换通风效果影响研究

对送风温度变化对含三个污染热源置换通风效果的影响进行了实验研究,分析讨论了一定热源强度情况下模拟实验房间温度场和气流组织特性,阐述了送风温度对热舒适性、热力分层高度的影响,并确定出最佳送风温度,研究结果对工程实践具有指导意义。     

三峡库区小型垃圾堆放场生活垃圾的稳定化分析

三峡库区生活垃圾基本采取沿长江干流及支流两岸自然堆放,导致形成大量的小型的垃圾堆放场,采取有效的措施综合治理它们对于三峡库区的环境保护至关重要。分析并判别它们的稳定化状态直接关系到治理措施的有效性和针对性。本文主要通过分析三峡库区三个停止使用4～5年的小型垃圾堆放场不同位置垃圾的有机质、浸出液浓度(COD、TN与TP)和含水率,判别各垃圾样品的稳定化程度,进而确定垃圾堆放场的稳定化程度。     

火电厂人身伤害事故的原因及其预防措施

对永安火电厂历年来人身伤害事故进行了分析 ,并采取了一系列预防措施 ,取得了较好效果。     

洁净室空气洁净度评价的模糊模式识别方法

洁净室空气洁净程度的高低属于模糊概念,将各评价样本实测指标矩阵转变为相对隶属度矩阵,同时将各标准模式指标标准值矩阵转变为指标准相对隶属度矩阵,以全体样本对于各标准模式间的加权广义距离平方和最小建立目标函数,经构造拉格朗日函数,建立了洁净室空气洁净度评价的模糊模式识别模型。斗净室洁净程度评价是一个多目标评价问题,提出了确定指标权重的主、客观结合法,即先建立求解各指标权重的迭代模型并求出指标权重的初始值,然后根据评价的经验,采用重要性语气算子调整各指标的相对隶属度,对初始值进行调整,归一化后得到合理的指标权重值,经计算实例验证,本建立的模式识别方法物理意义明确,评价结果符合实际。     

Compassion fatigue and compassion satisfaction among family physicians in the Republic of Srpska,Bosnia and Herzegovina

Aims. The aim of this study was to examine self-perceived compassion fatigue and compassion satisfaction among family physicians in Bosnia and Herzegovina and describe potential contributing factors. Methods. The cross-sectional study enrolled 120 family physicians. Professional quality of life compassion satisfaction and fatigue version 5 (ProQOL5) was used to assess compassion satisfaction and two components of compassion fatigue, secondary traumatic stress and burnout. The symptoms of chronic fatigue were evaluated using the Chalder fatigue scale. Results. The majority of family physicians had moderate levels of compassion satisfaction (70%), burnout (75%) and secondary traumatic stress (55.8%). Family physicians with higher levels of secondary traumatic stress reported chronic fatigue (p?=?0.001), longer length of service (p?=?0.024) and residency training (p?=?0.041). Chronic fatigue (p?=?0.001), living in a rural environment (p?=?0.033), larger size of practice (p?=?0.006) and high number of patients with chronic disease (p?=?0.001) were associated with a higher risk of burnout. Conclusion. Family physicians with large practices, long years of experience, a high number of chronically ill patients and experiencing chronic fatigue are at risk of developing compassion fatigue. A systematic exploration of compassion fatigue in relation to working conditions might provide an appropriate starting point for the development of preventive interventions.     

Analysis of BIM application relationship with integration degree of construction environment

As the world pays more attention to low-earbon and sustainable development,there’s a growing trend in architecture,engineering and construction fields to construct greener,more energy efficient and more sustainable buildings with the help of building information modeling(BIM).As BIM application becomes popular in industry,more and more scholars and engineers point out that an integrated construction environment is better for BIM’s fully functional capability.This paper illustrates the relationship between BIM application and an integrated construction environment based on case survey data.It is found that even though an integration construction environment is not necessary in BIM application,the statistical results showed that DBB(design-bid-build)and CM(construction management)modes have great differences in BIM’s application implementation scope and implementation deepness,while DB and CM modes do not.     

Design of a novel comfort liner for a motorcycle helmet

Natural fibres are nowadays increasingly being employed for producing protective clothing and sportswear. Due to economic and/or environmental considerations they are replacing synthetic materials. The present work provides an insight into the design and development of a novel comfort liner for a motorcycle helmet. The liner is produced from wool and Tunisian alfa fibre. The plant of the alfa fibre is abundantly available in Tunisia. Furthermore, we describe a design concept for a liner that uses these natural fibres and phase change material to improve sweat absorption and perception of thermal comfort. The raw material, the processes involved and the solution to use the phase change material are analysed. The novel comfort liner can facilitate breathability and evaporative transfer of heat in the safety helmet. In addition, it increases comfort, well-being, and provides an indirect message to use natural fibres for textile support to preserve our environment.     

Sitting Comfort of Ergonomic Office Chairs—Developed Versus Intuitive Evaluation

The sitting comfort of office chairs with different ergonomic layouts (inferior, superior) was examined. Fifty participants were randomly assigned to a 2 × 5 factorial experimental design with 2 different conditions of ergonomic chair layout (inferior or superior) and 5 different conditions of instruction to explore the chair. Four conditions were created to differentiate between various levels of perceptual awareness and processing of chair-related information (guided exploration and developed evaluation). In a 5th condition, participants remained uninstructed (free exploration and intuitive exploration). Under guided exploration, the participants’ perception of sitting comfort was in line with objective differences in the chair layout. Different conditions of guided exploration, however, did not influence the evaluations. Under free exploration, the participants’ perceptions did not match the ergonomic chair layout. In contrast to participants under guided exploration, they even rated the ergonomically inferior office chair more favourably than the ergonomically superior chair.     

Operator dermal exposure and protection provided by personal protective equipment and working coveralls during mixing/loading,application and sprayer cleaning in vineyards

The efficiency of a working coverall combined with personal protective equipment to protect operators against dermal exposure to plant protection products under field conditions was studied. Operators wore a non-certified water-repellent finish polyester/cotton coverall plus a certified gown during the mixing/loading and the cleaning phases. Insecticide foliar application to a vineyard was selected as the exposure scenario. The overall dermal residue levels measured in this study were in the range of data recently collected in Europe. The water-repellent finish working coverall reduced body exposure by a factor of approximately 95%. Wearing a Category III Type 3 partial body gown during mixing/loading and cleaning of the application equipment led to a further protective effect of 98.7%. The combination of a water-repellent finish working coverall and partial body protection during specific tasks provided satisfactory levels of protection and can be considered as suitable protection for the conditions of use studied.     

湿度显示卡在防水试验中的应用

文章介绍了采用湿度显示卡在产品防水试验中的应用。结合IP等级中的防水试验,通过分析产品的防水结构与内部主要安全部件,科学使用与排布湿度显示卡,准确判定进水路径,以此达到对防水试验结果的准确判定与分析。