系统评价天然蛭石吸附氨氮的效果

采用在人工配置含氨氮的污水中投加蛭石的方法,系统研究了天然蛭石吸附污水中氨氮的饱和吸附容量以及蛭石吸附氨氮的等温吸附曲线,探讨了污水的pH值、温度、浓度对氨氮去除率的影响及各影响因子的大小,结果表明,蛭石的饱和吸附量为20 8mg/g;蛭石吸附量在pH2 0～6 0范围内随着pH的增大而增大,最佳pH为4 0～6 0;温度在15～35℃范围内,吸附量随温度的升高减小,氨氮的去除率随着蛭石用量的增加而增加,影响因素的大小顺序为:pH>蛭石的用量>吸附时间>温度。这为蛭石作为一种新型氨氮吸附材料提供了基础参数。     

低浓度臭氧在含钴盐硅胶上的吸附研究

常压下对含钴盐硅胶进行低浓度臭氧的吸附实验，吸附达到饱和后用氮气作为载气加热解吸。结果显示，含钴盐的硅胶对臭氧具有较强的吸附能力；臭氧解吸量随着解吸温度的上升而增加；吸附了臭氧的含钴硅胶粒子在常温(313．15K)下可在60min内不问断解吸出臭氧。     

核桃壳粉对水溶液中Pb2＋的吸附

实验通过间歇吸附方式研究了核桃壳粉对水溶液中Pb^2＋的吸附特性,探讨了核桃壳粉粒径及用量、溶液pH、Pb^2＋初始浓度等参数对吸附的影响,并讨论了吸附过程的热力学和动力学特征。结果表明,核桃壳粉对Pb^2＋吸附的最佳pH为5．0,去除率随吸附剂粒径的减小、用量的增加、Pb^2＋初始浓度的减小而增加。优化实验条件下,0～0．3mm15g／L的吸附剂在298K时,对pH=5的50mL50mg／LPb^2＋溶液的去除率达96．98％。核桃壳粉对Pb^2＋的吸附等温线符合Sips模型,在283、293和303K的最大吸附量分别为18．25、18．27和20．94mg／g。吸附过程是放热的、混乱度减小的自发过程,且符合准二级动力学模型。吸附速率常数随温度升高而减小,在293和303K时分别在90和120min基本达到平衡。结合FTIR和SEM手段发现核桃壳对Pb^2＋的吸附以物理吸附为主,同时包括离子交换、螯合等化学吸附以及颗粒内扩散步骤,是一个复杂的过程。     

Effect of temperature on single and competitive adsorptions of Cu(II) and Zn(II) onto natural clays

This study conducted a combined adsorption-sequential extractionanalysis (CASA), by which five phases (i.e., exchangeable, carbonate, Mn-Oxide, organic, and Fe-Oxide phases) of adsorbed heavy metals were analyzed, to investigate temperature effects on single and competitive adsorptions of Zn(II) and Cu(II) ontonatural clays. In the case of single adsorption of Zn, the exchangeable phase adsorption decreased from 65 to 40%, but thecarbonate phase adsorption increased from 30 to 40%, with an increase in temperature from 15 to 55 °C. However, in itscompetitive adsorption with Cu, Zn was mostly present in the exchangeable phase (over 90%), and with an increase in temperature, the exchangeable phase adsorption decreased only 10%. In the case of Cu, over 50% among the total amount of adsorption was present in the carbonate phase in both cases ofsingle and competitive adsorptions. The carbonate phaseadsorption of Cu increased from 56 to 61% and from 60 to 66% in single and competitive adsorptions, respectively, with atemperature increase. These results show that in the case of Zn,the major mechanism of retention in natural clay soils might beexchangeable phase adsorption, especially in the case of competitive adsorption with Cu. However, in the case of Cu, the major mechanism might be carbonate phase adsorption, which is known to be a more immobile phase than exchangeable phase adsorption. It seems that the adsorption of Zn and Cu onto natural clays is an endothermic reaction, which represents thatthe adsorption equilibrium constants and capacities increase with a temperature increase, with the exception of exchangeablephase adsorption.     

超声前处理强化活性炭吸附活性艳红X-3B染料废水

探究了超声前处理活性艳红X-3B染料废水强化活性炭吸附降解性能及不同超声参数的影响规律,包括超声功率和超声时间。研究结果表明,超声前处理活性艳红X-3B染料废水可通过空化效应使有机大分子裂解为小分子易于被活性炭吸附,同时可强化其到活性炭微孔中传输,提高了活性炭吸附降解性能,最佳超声功率为320 W。浓度越高,所需超声时间越长,当超声达到一定时间后,继续超声不会影响染料分子的吸附。超声前处理虽然不会改变吸附平衡时间,但可有效增加活性炭处理活性艳红X-3B染料废水的饱和吸附量。     

聚天冬氨酸对土壤吸附、解吸汞的机制研究

为揭示土壤中添加聚天冬氨酸(PASP)后其对汞的吸附、解吸过程,探究了不同PASP用量对土壤吸附解吸汞的机制及有机质、pH、汞初始浓度等因素的影响.结果 表明,PASP可显著抑制土壤对汞的吸附,促进土壤对汞的解吸,在PASP用量为300 mg时,其吸附量、解吸量分别是未添加PASP时的0.68、27倍;有机质与PASP...     

活性炭纤维处理甲苯废气试验研究

采用动态吸附试验,研究了进气温度、废气浓度对粘胶基活性炭纤维吸附甲苯过程的影响,分析了活性炭纤维(ACF)的穿透时间、平衡饱和吸附量的变化情况,并用Y-N模型对穿透曲线进行拟合.研究了吸附饱和ACF采用氮气热再生法,确定了温度、流量、再生时间等最佳操作参数,并进行了相关机理的探讨.     

用次磷酸钠废渣制备饲料级磷酸三钙

采用高温煅烧工艺,以工业生产次磷酸钠的废渣为原料,制备饲料级磷酸三钙,并对最佳工艺条件进行探讨。最佳工艺条件：煅烧温度600℃、煅烧时间20min。制得的饲料级磷酸三钙中磷的质量分数为16％～18％,符合Q／YHY01—2003《饲料级磷酸三钙》产品质量企业标准。     

树脂吸附-Fenton试剂氧化法处理水杨醛生产废水

采用树脂吸附-Fenton试剂氧化法处理水杨醛生产废水。XF-01树脂和XF-02树脂静态吸附水杨醛生产废水时,COD去除率均在85％以上,挥发酚去除率均高于90％。XF-02树脂对水杨醛生产废水的处理效果更佳。动态吸附随废水流量增大,吸附出水的COD和挥发酚质量浓度均增加。适宜的废水流量为15BV,树脂的最佳脱附温度为80℃。在连续4批的吸附-脱附实验中,吸附出水的平均COD约为1200mg／L,平均挥发酚质量浓度小于10mg／L。在Fenton试剂氧化中,铁屑和铁粉的催化效果差别很小,都好于FeSO4·7H2O。以铁屑为催化剂、H2O2溶液加入量为1％时,氧化出水的COD小于150mg／L,挥发酚质量浓度小于0．5mg／L。     

分子印迹硅纳米改性氧化石墨烯复合材料的制备及其对双酚A的吸附研究

制备了分子印迹硅纳米-氧化石墨烯复合吸附材料,并研究了复合材料对双酚A(Bisphenol A,BPA)的吸附性能.实验结果表明:复合吸附材料对BPA的吸附在35min内达到吸附平衡,Langmuir等温线模型得出最大吸附容量约为338.3mg/g;相对于BPA的结构类似物,对BPA具有良好的选择吸附性能;在溶液pH接...