YSZ-W复合涂层的制备及抗烧蚀性能研究

目的 在TC4表面制备均匀致密的YSZ-20％(体积分数)W(ZW2)复合涂层,以提高其抗烧蚀性能,并对其在超音速燃流中的烧蚀响应机制进行初步探究.方法 以8YSZ和W粉为原料,采用喷雾干燥-真空烧结工艺制备喷涂用ZW2复合粉末,利用大气等离子喷涂技术(APS)制备ZW2复合涂层,采用超音速火焰冲刷法(SCF)测试涂层...     

航空煤油薄油层燃烧特性实验研究

为研究薄油层燃烧特性,开展航空煤油薄层油池火实验,分析油品燃烧的整个过程、燃烧速率、火焰高度和辐射反馈等参数随时间的变化规律。结果表明:整个薄层燃烧过程除发展、稳定和熄灭阶段外,还存在薄层燃烧衰减阶段。稳定阶段的燃烧速率与初始油层厚度相关,但随着厚度的增加其逐渐趋于稳定;薄层燃烧衰减阶段,燃烧速率会随着实时油层厚度的下降逐渐降低。对比火焰高度的实测值和模型预测值发现,Heskestad模型的预测更接近实际结果;燃烧发展阶段后,火焰辐射反馈基本维持稳定,受初始厚度的影响较小,但辐射透射强度会随着油层厚度的降低而增加,且增速逐渐加快,表明辐射透射在薄层燃烧衰退阶段中起到关键作用。结合辐射透射的变化规律,将辐射反馈分为可吸收和不可吸收2部分,并提出用于预测辐射透射大小的经验模型。     

多孔矿物-聚磷酸铵对甲烷爆炸的协同抑制研究

为探究新型多孔矿物(MTS)-聚磷酸铵(APP)复合粉体对甲烷-空气预混气爆炸的抑制效果,采用20 L球形爆炸装置开展多孔矿物、APP及其复合粉体在不同组成、不同添加浓度条件下的甲烷爆炸抑制试验,并使用热分析仪研究其热解行为.研究结果表明:当粉体添加量为0.100 g/L,多孔矿物与APP质量组成比为1∶3时,复合粉体...     

Suppression of premixed flames with inert particles

Dispersal of inert particles on a flame front is one of the techniques employed to suppress explosions. The current study investigates the influence of micron-sized (75–90 μm) inert (sand) particles on the laminar burning velocity of methane-air premixtures of different equivalence ratios (0.9–1.2) and reactant temperatures (297, 350, 400 K) using a Bunsen-burner type experimental apparatus. When an inert particle interacts with the flame zone, it extracts energy from the flame, thereby acting like a heat sink and hence reducing the flame temperature. Results show that for sand particle size in the range of 75–90 μm, a concentration of 380–520 g/m³ is necessary for extinction of a methane-air flame at ambient temperature. An increase in reactant temperature reduces the heat-sink effect necessitating a higher concentration of sand to extinguish the flame. A mathematical model is developed to generalize the results and make them applicable to a wide range of parameters.     

The quenching of propane deflagrations by crimped ribbon flame arrestors

Experimental studies of deflagration flame quenching by crimped ribbon flame arrestors were performed in a circular ducting with propane-air flammable mixture. The corresponding flameproof velocities were determined systemically. The results showed that the channel length, the expansion ratio and the aperture size must be taken into consideration to predict the performance of the crimped ribbon flame arrestors. To explore the relationship between flameproof velocity and arrestor structure, numerical simulations were carried out. The simulated results showed that with the reduction of the hydraulic diameter of the aperture size, the flameproof velocity is increased, which implies the basic angle must be considered when crimped ribbon flame arrestors are used to quench deflagration flame. In addition, the influence of the expansion ratio is of great significance on the efficiency of flame arrestors. The flameproof velocity can be reduced to be a value related to the expansion ratio. Two empirical formulas were derived to exhibit the relation between the flameproof velocity and the characteristics of the flame arrestor, which can be used to predict the performance of crimped ribbon arrestors.     

火焰原子吸收法测定水中铁的质量控制指标研究

本文研究了火焰原子吸收法测定水中铁的质量控制指标,全国共12个省份的46家实验室参加测定工作,提供了具有全国性指导意义的工作参考数据.研究结果为:标准样品在0.2～4.0mg/L浓度范围内的RSD≤3.0%,RSD'≤10.0%,室间标准偏差≤0.10mg/L;浓度≤2.0mg/L时,RE≤±10.0%,2.0～4.0...     

膨胀型阻燃聚丙烯材料的耐湿热性能研究

聚丙烯(PP)以其优异的力学性能、密度小、质量轻等特点而广泛用于汽车、家电、建筑等行业.但是聚丙烯容易燃烧,其氧指数只有18左右,且燃烧时还会产生大量熔滴,极易传播火焰,这大大限制了其应用.近年来,膨胀型阻燃剂(IFR)在阻燃PP中的应用受到了人们高度的重视.本文主要介绍膨胀型阻燃剂微胶囊制备及其微胶囊在聚丙烯中阻燃性...     

非多溴联苯醚(PBDE)类卤系阻燃剂的生物富集特征

近年来,六溴环十二烷(HBCDs)、四溴双酚A(TBBPA)、双(六氯环戊二烯)环辛烷(DP)、十溴二苯乙烷(DBDPE)、l,2-双(三溴苯氧基)乙烷(BTBPE)、五溴甲苯(PBT)、2,3,4,5,6-五溴乙苯(PBEB)和六溴苯(HBB)等非PBDE类卤系阻燃剂(HFRs)在生物体内的富集及其生态风险已引起人们...     

5种结构障碍物对火焰传播影响的试验研究

为了研究障碍物结构对预混甲烷管道内火焰传播速度和峰值超压的影响,自行设计一套火焰加速系统。在火焰加速管道上安装光电传感器和压力传感器分别测定火焰传播速度和超压,试验中选取5种结构障碍物,即平板、长方体、三棱柱、四棱柱和圆柱,其阻塞比分别为20%,40%和60%3种。研究结果表明:初始阶段障碍物阻碍火焰传播,当火焰越过障碍物后,障碍物能显著加速火焰传播。随着阻塞比增加,相同结构障碍物的火焰传播速度总体上不断增加,而峰值超压先变大后减小。相同阻塞比下,平板、三棱柱对火焰传播速度和超压影响相对较大;长方体居中;圆柱、四棱柱对增加火焰传播速度和超压作用相对较小。较小阻塞比障碍物管道内超压与无障碍物管道中的超压相比显著增加,但此后,管道中超压随阻塞比变化不明显。     

瓦斯爆炸过程中火焰传播的实验与数值模拟研究

为了研究矿井瓦斯爆炸火焰发展过程中结构与参数的动态变化特征,建立小尺寸管道气体爆炸实验平台,结合高速纹影摄影技术,探测了不同浓度的甲烷-空气预混气体火焰在管道内传播的结构变化特性,并得出速度变化特征曲线。同时建立相应的数学模型和物理模型,通过模拟实验研究管道内气体爆炸反应过程中火焰传播速度变化过程,计算图像和实验图像走向趋向一致。