热带海洋大气环境下X70管线钢的缝隙腐蚀行为研究

目的研究X70管线钢在热带海洋大气实海环境下的缝隙腐蚀行为。方法在距离湛江东海岛海岸50m和200 m处分别搭建楔型缝隙模型,安装大气环境Cl-收集装置和自动气象监测站。结果距离海岸越近,风速越大,大气中Cl-沉降速率也越大,X70管线钢缝隙腐蚀越严重。X70管线钢在距离海岸50 m处发生缝隙腐蚀的最大缝宽约为0.96 mm,200 m处最大缝宽约为3.75 mm,50 m处缝隙腐蚀更严重。结论缝隙腐蚀区域形成了氧浓差电池,同时随着缝隙液中Cl-向缝隙内迁移,发生闭塞区电池自催化过程,在二者共同作用下,缝隙腐蚀区域较非缝隙腐蚀区域腐蚀更严重。     

钢渣吸附处理苯酚废水的研究

采用恒温振荡的方法,考察了钢渣粒径、吸附温度、振荡速度、溶液pH值、溶液初始浓度对苯酚去除率的影响。结果表明,在粒径为120~180目、pH=4.0、苯酚溶液浓度在500 mg/L以内、苯酚/钢渣质量比为1∶1 000时吸附效果最好。钢渣对苯酚的吸附能较好地符合Langmuir和Freundlich吸附等温线,线性相关系数分别为0.9971和0.9916,吸附机理为表面吸附。     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.     

Recovery of heavy metals from electroplating sludge and stainless steel pickle waste liquid by ammonia leaching method

１　ＩｎｔｒｏｄｕｃｔｉｏｎＥｌｅｃｔｒｏｐｌａｔｉｎｇｓｌｕｄｇｅ，ｃｏｎｔａｉｎｉｎｇＣｕ，Ｎｉ，Ｚｎ，Ｃｒ，Ｆｅ，ｅｔｃ．，ｉｓｈａｒｍｆｕｌｗａｓｔｅｍａｔｅｒｉａｌｐｒｏｄｕｃｅｄｂｙｇａｌｖａｎｉｚａｔｉｏｎｉｎｄｕｓｔｒｙ．Ｔｈｅｒｅｉｓｓｔｉｌｌｎｏｅｆｆｅｃｔｉｖｅｍｅｔｈｏｄｔｏｒｅｃｏｖｅｒｒｅｓｏｕｒｃｅａｎｄｃｏｎｔｒｏｌｐｏｌｌｕｔｉｏｎｂｏｔｈａｔｈｏｍｅａｎｄａｂｒｏａｄ．Ｔｈｅｍｅｔａｌｓｄｉｓｃａｒｄｅｄｂｙｇａｌｖａｎｉｚａｔｉｏｎｉｎｄｕｓｔｒｙａｍｏｕｎ…     

硫酸盐还原菌对EH40焊接钢海水腐蚀的影响

目的研究无菌和SRB体系中EH40钢焊接接头的母材区、热影响区和焊缝区腐蚀差异。方法利用金相显微镜观察、失重法、电化学测试、扫描电镜和X射线光电子能谱仪等分析手段。结果焊缝区微观组织由块状铁素体(BLF)和魏氏组织(W)组成;热影响区可再分为粗晶区(CGHAZ)和细晶区(FGHAZ)两个区;母材区主要由BLF、AF和少量珠光体组成。在无菌对照体系中,焊缝区腐蚀速率为0.0026 mm/a,混合区次之,为0.0023 mm/a,母材区最小,为0.0019 mm/a。含SRB体系中,各区的腐蚀速率为:焊缝区(0.0037 mm/a)混合区(0.0034 mm/a)母材区(0.0030 mm/a)。热影响区腐蚀产物形貌粗大,点蚀孔也较大。结论焊缝区比母材区容易腐蚀,由此易造成小阳极大阴极加速腐蚀,热影响区容易发生点蚀。SRB能促进三个区域试样腐蚀加速。     

Exposure Programme on Atmospheric Corrosion Effects of Acidifying Pollutants in Tropical and Subtropical Climates

Many national exposure programmes have been performed in tropical and subtropical climates during the last 50 years. However, ambitious programmes involving more than a few countries are scarce. In this paper a recently formed network of test sites is described involving 12 test sites in Asia (India, Vietnam, Thailand, Malaysia and China including Hong Kong) and four test sites in Africa (South Africa, Zambia and Zimbabwe). This effort is part of the 2001–2004 Swedish International Development Agency (SIDA) funded Programme on Regional Air Pollution in Developing Countries (RAPIDC). Corrosion attack after one (2002–2003) year of exposure (carbon steel, zinc, copper, limestone and paint coated steel) are presented together with environmental data (SO₂, NO₂, HNO₃, O₃, particles, amount and pH of precipitation, temperature and relative humidity) for all the test sites. The obtained corrosion values are substantially higher than expected for limestone, higher than expected for carbon steel and lower than expected for zinc compared to values calculated using the best available dose–response functions.     

节能减排 实现钢铁企业可持续发展

通过对钢铁行业消耗水资源及产生污染情况进行分析，阐述了目前钢铁行业为节能减排而采取的管理、技术、污染治理措施，以达到减少废水外排量、降低污染物浓度、降低新水消耗的目的，对钢铁行业废水回用中尚存和潜在的工艺、设计问题进行了讨论，同时提出了通过清洁生产、优化工艺结构来解决问题的措施和建议，确立了企业近期和长期的节能减排任务目标。     

钢铁冶炼渣的综合利用及发展对策

钢铁冶炼渣是钢铁企业开展资源利用的重点，冶炼渣的综合利用途径及利用水平与处理加工技术有密切关系，冶炼渣最多，影响大，易见成效，有利于综合利用工作向纵深发展，本文提出了合理利用建议。     

高气泡表面积通量浮选柱气浮除藻的研究

湖泊、水库等水源的富营养化，使藻类去除成为饮用水生产的重要任务。本研究采用高气泡表面积通量浮选柱气浮除藻，考察了混凝剂、气泡表面积通量和浮选柱高度等因素的影响。试验表明，高气泡表面积通量浮选柱气浮可高效地去除绿藻、硅藻和蓝藻，叶绿素a和藻类去除率达95％以上，比传统浮选柱气浮和沉降作业有较大幅度提高。与普通气浮柱比较，高气泡表面积通量浮选柱增加了气泡与藻的碰撞几率，防止因大表观充气速率造成的紊流和扰动，使气泡／藻结合体有相对静态的浮升环境，避免了气泡／藻结合体在浮升过程中的脱落，实现对藻类的迅速捕集和转移。     

振动法测试预应力拉杆工作内力

预应力拉杆弯曲刚度较小,其振动频率近似于绳索,故可借用绳索振动原理对拉杆轴力进行测定.以某游泳馆拱下预应力拉杆检测为例,应用振动法测试拉杆的工作内力.