钢管混凝土柱耐火性能和抗火设计的特点

简要论述了按ISO－834和GS9978－88规定的标准升温曲线升温作用下钢管混凝土柱耐火性能的特点,分析了影响钢管混凝土柱耐火极限的因素,说明了由于钢管和混凝土的共同工作且核心混凝土具有较好的吸热性能,从而使钢管混凝土柱具有较好的耐火性能。在进行钢管钢混凝土柱的抗火设计时,柱子外围只需进行适当的防火涂料保护,即可达到《高层用民建筑设计防火规范（GB50045－95）》对柱结构所要求的耐火极限。《高层用民建筑设计防火规范（GB50045－95）》中对钢结构柱防火保护层厚度的确定方法不适合于钢管混凝土。     

磁河有机污染物在饱和土壤中迁移转化试验研究

通过静态吸附、静态降解和动态土柱试验,研究了磁河废水中有机污染物在土壤饱水条件下的迁移转化行为.实验结果经线性拟合和参数估算,得到弥散系数D=0.0036m2/d,分配系数K_d=0.19cm3/g,降解系数K=0.68 d-1.表明磁河有机污染物在土壤中有较强的吸附和降解能力.      

消耗臭氧层物质对平流层臭氧的影响预测

采用美国戈达德航天中心的雨云气象卫星臭氧全球网格资料,从中截取中国大陆主体部分(69.375°E～139.375°E、14.5°N～54.5°N)的数据,分析臭氧柱浓度变化的统计特性.结果表明,1979～1998年,大陆主体上空区域的臭氧柱浓度下降趋势明显,青藏高原上空的臭氧柱浓度下降速度较全国水平略快.假定其他缔约国均履行蒙特利尔议定书的前提下,以1980年臭氧柱浓度情形为基准,利用臭氧柱浓度与消耗臭氧层物质浓度之间的关系,预测了中国履行蒙特利尔议定书与不履行两种情形下,2001～2050年中国上空臭氧柱浓度变化情况.结果表明,中国履约受控情形下,2050年大陆主体部分上空的臭氧柱浓度将与其1980年的水平相近;不受控情形下,柱浓度将持续下降,2050年整个大陆主体上空绝大部分地区臭氧柱浓度值均低于240DU.     

多轴差分吸收光谱仪对大气污染物SO2、NO2、O3的立体监测

多轴差分吸收光谱仪（MAX—DOAS）是用来监测大气中痕量气体成分的专用仪器,它能同时自动监测SO2、NO2和03三种污染气体,得到的垂直柱浓度对研究污染物的时空分布特点具有重要意义。分析了2011年5月下旬至2012年4月中旬期间MAX—DOAS在重庆市的测量数据,结果表明：夏季SO2的柱浓度高于其它季节,并在每个季节都出现了峰值：SO2与NO2之间浓度变化趋势相同,且最大小时浓度值都集中在上午;O3垂直柱浓度受气象条件和臭氧前体物的影响呈夏季高、秋冬低的季节性变化;通过多元回归建立了O3柱浓度与气象因素、前体物的关系式。     

Laboratory-scale column study for remediation of TCE-contaminated aquifers using three-section controlled-release potassium permanganate barriers

A laboratory-scale study with a sand column was designed to simulate trichloroethylene(TCE) pollution in the aquifer environment with three-section controlled-release potassium permanganate(CRP) barriers.The main objective of this study was to evaluate the feasibility of CRP barriers in remediation of TCE in aquifers in a long-term and controlled manner.CRP particles with a 1:3 molar ratio of KMnO 4 to stearic acid showed the best controlled-release properties in pure water,and the theoretical release time was 138.5 days.The results of TCE removal in the test column indicated that complete removal efficiency of TCE in a sand column by three-section CRP barriers could be reached within 15 days.The molar ratio of KMnO 4 to TCE in the three-section CRP barriers was 16:1,which was much lower than 82:1 as required when KMnO 4 solution is used directly to achieve complete destruction of TCE.This result revealed that the efficiency of CRP for remediation of TCE was highly improved after encapsulation.     

Growth characteristics of algae during early stages of phytoplankton bloom in Lake Taihu, China

Three treatments, sediment plus lake water (S+W), sterilized sediment plus lake water (SS+W), and sediment plus filtered lake water (S+FW), were recruited to investigate the growth characteristics of algae during pre-bloom and the importance of algal inocula in the water column and sediment. The results showed that in the water column, biomass of all algae increased in all treatments when recruitment was initiated, whereas this tendency differed among treatments with further increment of temperature. The process of algal growth consisted of two stages: Stage I, the onset of recruitment and Stage II, the subsequent growth of algae. Compared with S+W, in Stage I, SS+W significantly increased the biomass of cyanophytes by 178.70%, and decreased the biomass of non-cyanophytes by 43.40%; In Stage II, SS+W notably stimulated the growth of all algae, thus incurring the occurrence of phytoplankton bloom. Further analyses revealed that both metabolic activity and photochemical activity of algae were enhanced in SS+W, which resulted from the releasing of nutrients from sediment. These results suggest that algal growth in Stage II and algal inocula in the water column can be important factors for the formation of phytoplankton bloom. In addition, possible mechanisms promoting algal recruitment and subsequent growth of algae were explored.     

攀钢西昌钢钒有限公司环保信息化建设探索

攀钢集团公司2009年在凉山州西昌市投资建设了攀钢西昌钒钛资源综合利用项目,成立了攀钢西昌钢钒有限公司。项目组成之一的信息化系统建设中,能源环保系统作为一子系统同步配套建设。介绍了能源环保子系统中环保信息化系统设计架构、功能、技术路线等,可作为环保信息化系统设计的借鉴和参考。     

一种钢渣中氯离子的测定方法

利用蒸馏装置蒸出钢渣中的氯离子,使用硝酸汞滴定方法进行滴定,选用两种钢渣,在不同实验室分别进行了分析测定的比较和验证。结果表明:该方法简便易操作,重现性和准确性都比较高,作为钢渣中氯离子的测定是可行的。     

钢铁产业规划环评指标体系与综合评价研究

结合产业规划环评的特点,基于资源环境承载力、循环经济等理念,建立了钢铁产业规划环评指标体系。结合贵州省“十二五”钢铁产业发展规划环评的项目实践,用上述指标体系对该规划进行评价,采用层次分析法-模糊综合评价模型（AHP—FCE）对不同的规划发展模式进行情景分析,并提出规划实施过程中需要重点控制的环节,为产业规划实施提供了决策指导。     

Laser tempering based turning process for efficient machining of hardened AISI 52100 steel

Cost-effective machining of hardened steel components such as a large wind turbine bearing has traditionally posed a significant challenge. This paper presents an approach to machine hardened steel parts efficiently at higher material removal rates and lower tooling cost. The approach involves a two-step process consisting of laser tempering of the hardened workpiece surface followed by conventional machining at higher material removal rates with lower cost ceramic tools to efficiently remove the tempered material. The laser scanning parameters that yield the highest depth of tempered layer are obtained from a kinetic phase change model. Machining experiments are performed to demonstrate the possibility of higher material removal rates and improved tool wear behavior compared to the conventional hard turning process. Tool wear performance, cutting forces, and surface finish of Cubic Boron Nitride (CBN) tools as well as low cost ceramic tools are compared in machining of hardened AISI 52100 steel (~63 HRC). In addition, cutting forces and surface finish are compared for the laser tempering based turning and conventional hard turning processes. Experimental results show the potential benefits of the laser tempering based turning process over the conventional hard turning process.