屏蔽服冷却系统对人体表面温度影响的研究*

为科学有效地论证多种方式组合的冷却屏蔽服在不同环境条件下对人体表面温度控制的效果,需要对冷却系统及人体敏感部位发热量进行客观评估。通过对5名健康男性的高温测试,探究人体在不同环境温度下体表温度的变化,得出胸部、背部及额头为热量最高部位,并构建以“人体-降温屏蔽服-外界环境”为主体的冷却系统数值模型,对不同环境中的屏蔽服冷却效果展开研究,分析穿戴冷却屏蔽服时人体躯干部分的温度分布及影响。结果表明:在屏蔽服中靠近胸部、背部部位引入相变材料和风扇,均可帮助人体降低体温,提高舒适度。     

瓦斯抽采PC-CAS基封孔材料优化及其膨胀作用分析*

为了研制以硅酸盐/铝酸盐水泥、生石灰、生石膏为主的PC-CAS基封孔材料,采用正交试验优化材料配比、开展膨胀力研究,并用扫描电镜观测料-煤胶结形貌。研究结果表明:材料的最优配比为A2B2C4,其具备优良的流动性、强度及致密性,造浆量达2 100 mL/kg;PC-CAS基材料具有显著的膨胀性,其膨胀力随时间先增大而后趋于稳定,并且该膨胀力随着径向约束的提高而增大;相比于FP材料,PC-CAS基材料产生的膨胀力能够显著降低材料-煤岩界面的空隙并在一定程度上压密煤体内部的裂隙;该材料产生的膨胀力可压密封孔段围岩、提高封孔质量,并为后期“二次注浆”提供保压条件。工业试验结果表明,采用PC-CAS基材料进行封孔可显著改善抽采效果,将原有平均浓度10.11%提升至20.08%。     

铁路沿线可燃重气储罐最小隔离区域划分探讨*

为保护铁路线,以某化工厂距离高铁路线最近的丙烯球罐为例,提出丙烯球罐泄漏最小隔离区域划分方法以及2种保护高铁线路方案,利用重气扩散模型和定量风险评价（QRA）软件分别进行丙烯扩散模拟、爆炸模拟,并进行危险与可操作性分析（HAZOP）和保护层分析（LOPA）。结果表明:球罐发生泄漏及火灾爆炸等事故,会给附近铁路线带来严重破坏;丙烯泄漏或球罐因周围其他设备设施或可燃物质着火而温度升高时,保护措施不足;隧道的安全可靠性要高于仅设1道防爆墙,隧道长度需覆盖最小隔离区域的可及范围,在扩散区域内也需设立普通挡墙,在极度危险情况下,需要实施高铁停开等保护措施。     

Explosion suppression of porous materials in a pipe-connected spherical vessel

To study the suppression of different porous materials on the explosion of combustible gas, some experiments were implemented. The porous materials were categorized into three kinds, including six subcategories, and the explosion suppression characteristics of the thin iron hoop, one-layer porous materials, two-layer composite porous materials, and three-layer composite porous materials were studied and analyzed. The results show that a rarefaction wave appears in the spherical vessel during the rapid development stage of combustion explosion. Further, the thin iron hoop could enhance the gas explosion intensity. And the explosion intensity suppression effect of the porous materials is obvious, the best effects of one-layer, two-layer and three-layer porous materials are from Fe–Ni 10 mm/40 PPI, Fe–Ni 10 mm/90 PPI + Al₂O₃ 10 mm/30 PPI, and Al₂O₃ 10 mm/50 PPI + Fe–Ni 10 mm/40 PPI + SiC 20 mm/20 PPI, respectively. According to the surface morphology of the porous materials, the anti-sintering ability of the three categories of porous materials follows the order of Al₂O₃ > SiC > Fe–Ni. Besides, the thickness and pore size of the combined porous material was changed, which has a great influence on the explosion pressure and the explosion intensity.     

Reducing the Effects of Dredged Material Levees on Coastal Marsh Function: Sediment Deposition and Nekton Utilization

Dredged material levees in coastal Louisiana are normally associated with pipeline canals or, more frequently, canals dredged through the wetlands to allow access to drilling locations for mineral extraction. The hydrologic impact on marshes behind the levee is of concern to coastal resource managers because of the potential impact on sediment transport and deposition, and the effect on estuarine organism access to valuable nursery habitat. This study examined the effects of gaps in dredged material levees, compared to continuous levees and natural channel banks, on these two aspects of marsh function. Field studies for sediment deposition were conducted biweekly for a year, and nekton samples were collected in spring and fall. Variation in nekton density among study arears and landscape types was great in part because of the inherent sampling gear issues and in part because of differences in characteristics among areas. Nekton densities were generally greater in natural compared to leveed and gapped landscapes. Differences in landscape type did not explain patterns in sediment deposition. The gaps examined appear to be too restrictive of marsh flooding to provide efficient movements of floodwaters onto the marsh during moderate flooding events. The “trapping” effect of the levees increases sediment deposition during extreme events. Gapping material levees may be an effective method of partially restoring upper marsh connection to nekton, but this method may work best in lower elevation marshes where nekton use is greater.     

利用等离子技术治理再生纤维汽车内衬生产过程中的烟气

利用等离子技术,治理树脂聚合法生产再生纤维汽车内饰材料过程中产生的烟气,对等离子净化装置的结构参数、操作参数进行了优化,并对等离子体净化机理进行了分析。利用等离子技术,能够处理常规工艺设备无法治理的极微细可吸入颗粒物和气溶胶烟气;并可同时净化可吸入颗粒物和气态污染物。该设备结构简单、运行费用极低,可在产生烟气的很多行业和领域推广应用。     

某市给水管网中铁释放现象影响因素与控制对策分析

针对某市管网水中铁浓度的变化规律进行了系统的研究,确定了管垢向管网水中释放出的铁是管网水中铁超标的主要原因.研究中发现铸铁管和镀锌钢管中管垢的主要化学组分为铁.在给水管网中,管网水的溶解氧和余氯浓度低时,对应的管网水中铁释放现象严重,其原因是还原条件使管垢表面的致密钝化层被破坏,造成二价铁的大量释放.根据试验结果提出了给水管网中铁释放和“红水”现象的控制对策.     

滇池流域磷循环系统的物质流分析

研究营养元素在社会经济系统中的物质代谢结构及特征,是有效预防和控制地表水体富营养化的关键性分析技术之一.以滇池流域磷循环为研究案例,运用物质流分析方法建立了2000年流域静态物质流模型(PHOSFAD),并在此基础上识别出流域磷循环系统的总体结构特征,以及资源开采、化工生产、农业种植、畜禽养殖、居民生活等生产和消费部门的物质利用效率特征,为科学防治滇池水体富营养化提供了重要决策依据和参考.     

钙法提钒尾渣的浮选脱硫试验

根据钙法提钒尾渣的矿物特性,采用浮选法分离其中的石膏以实现脱硫,分别考察了矿浆pH、矿浆液固比、捕收剂添加量及浮选中水循环次数等因素对浮选指标的影响,并进行了理论分析,确定了钙法提钒尾渣浮选脱硫的优选工艺参数.试验结果表明,在矿浆pH为7、矿浆液固比为5:1、捕收剂添加量为0.6～0.8 kg/t的条件下,可获得w(S...     

环境监测用氮气中多组分VOCs标准物质的研制

介绍了采用称量法制备瓶装1μmol/mol氮气中42个组分挥发性有机物(VOCs)标准物质的研制方法。建立了选择离子模式,气相色谱-质谱联用的分析方法,对目标组分在气瓶中的长期稳定性进行了考察。所选择的42种目标组分完全满足中国环境保护标准《环境空气挥发性有机物的测定吸附管采样-热脱附/气相色谱-质谱法》(HJ 644—2013)和美国环保署《使用特殊处理的采样罐/气相色谱仪检测环境大气中的挥发性有机物》(EPA TO—14A)这2个方法标准中所规定的环境空气中挥发性有机有害成分的监测要求。将研制的气体标准物质与中国计量科学研究院(NIM)和英国国家物理实验室(NPL)分别进行了比对测试,取得了良好的比对结果与国际等效度。结果表明,1μmol/mol氮气中42种组分VOCs标准物质的有效期为一年,相对扩展不确定度为5.0%(包含因子k=2),并取得国家标准物质证书GBW(E)062231。