南充市空气中可吸入颗粒物污染水平分析

本文在连续1年又5个月同步采样的基础上，测得南充市市辖三城区5个采样监测点环境空气中PM10的浓度及其时空变化进行了分析。结果表明，PM10的日平均浓度范围为0．020～1．030mg／m^3，超标率达38．0％；周日均浓度在0.040～0．520mg／m^3之间，超标率达到了37．8％。空气污染最重为嘉陵城区，其次为高坪城区，再次为石油学院、炼油厂和市府二院。浓度季节变化特征表现为冬季最高，其次为秋季，再次为春季，最轻为夏季。     

层次分析法在工业园区生态影响评价中的应用--攀枝花市高耗能工业园区生态环境影响探讨

目前生态影响评价研究中的评价对象、内容和方法缺乏统一的模式，本文以攀枝花高耗能园区的开发为例，尝试建立一套系统的工业园区开发生态影响评价方法，该方法以层次分析法为基础，将生态系统分解为经济发展、社会进步、环境保护、景观生态保护四个目标子系统，并在此基础上细化评价因子，通过专家打分和矩阵运算确定其权重，再根据适当的评价标准，运用指数法得出评价结果。结果表明该工业园区在建成前后，其生态综合指数由0．552提高到0．794．其级别由三级提高到二级，说明该园区生态系统总的状态得到改善，该工业园区项目开发可行。     

Exploiting Abstract Possibilities: A Critique of the Concept and Practice of Product Patenting

Developments in biotechnology and genomics have moved the issue of patenting scientific and technological inventions toward the center of interest. In particular, the patentability of genes of plants, animals, or humans and of genetically modified (parts of) living organisms has been discussed, and questioned, from various normative perspectives. This paper aims to contribute to this debate. For this purpose, it first explains a number of relevant aspects of the theory and practice of patenting. The focus is on a special and increasingly significant type of patents, namely product patents. The paper provides three general arguments against the concept and practice of product patenting. The first argument briefly considers the claim that patents are legitimate because they promote socially useful innovation. Against this claim, it is argued that product patents may hamper rather than promote such innovation. The second and main argument concludes that product patents are not adequately based on actual technological inventions, as they should be according to the usual criteria of patentability. The principal moral issue is that product patents tend to reward patentees for inventions they have not really made available. The final argument proposes a method for patenting the heat of the sun. Assuming that granting this patent will be generally considered absurd, the argument exposes a further, fundamental problem of the concept and practice of product patenting.     

Environmental assessment of supercritical water oxidation of sewage sludge

Environmental aspects of using supercritical water oxidation (SCWO) to treat sewage sludge were studied using a life cycle assessment (LCA) methodology. The system studied is the first commercial scale SCWO plant for sewage sludge in the world, treating sludge from the municipal wastewater treatment facility in Harlingen, TX, USA. The environmental impacts were evaluated using three specific environmental attributes: global warming potential (GWP), photo-oxidant creation potential (POCP) and resource depletion; as well as two single point indicators: EPS2000 and EcoIndicator99. The LCA results show that for the described process, gas-fired preheating of the sludge is the major contributor to environmental impacts, and emissions from generating electricity for pumping and for oxygen production are also important. Overall, SCWO processing of undigested sewage sludge is an environmentally attractive technology, particularly when heat is recovered from the process. Energy-conserving measures and recovery of excess oxygen from the SCWO process should be considered for improving the sustainability potential.     

MODELING SEDIMENT AND PHOSPHORUS LOSSES IN AN AGRICULTURAL WATERSHED TO MEET TMDLs1

ABSTRACT: This paper studies the effectiveness of alternative farm management strategies at improving water quality to meet Total Maximum Daily Loads (TMDLs) in agricultural watersheds. A spatial process model was calibrated using monthly flow, sediment, and phosphorus (P) losses (1994 to 1996) from Sand Creek watershed in south‐central Minnesota. Statistical evaluation of predicted and observed data gave r² coefficients of 0.75, 0.69, and 0.49 for flow (average 4.1 m³/s), sediment load (average 0.44 ton/ha), and phosphorus load (average 0.97 kg/ha), respectively. The calibrated model was used to evaluate the effects of conservation tillage, conversion of crop land to pasture, and changes in phosphorus fertilizer application rate on pollutant loads. TMDLs were developed for sediment and P losses based on existing water quality standards and guidelines. Observed annual sediment and P losses exceeded these TMDLs by 59 percent and 83 percent, respectively. A combination of increased conservation tillage, reduced application rates of phosphorus fertilizer, and conversion of crop land to pasture could reduce sediment and phosphorus loads by 23 percent and 20 percent of existing loads, respectively. These reductions are much less than needed to meet TMDLs, suggesting that control of sediment using buffer strips and control of point sources of phosphorus are needed for the remaining reductions.     

CHEMISTRY OF COALBED METHANE DISCHARGE WATER INTERACTING WITH SEMI‐ARID EPHEMERAL STREAM CHANNELS1

ABSTRACT: The objective of this study was to examine the chemistry of Coalbed Methane (CBM) discharge water reacting with semi‐arid ephemeral stream channels in the Powder River Basin, Wyoming. The study area consisted of two ephemeral streams: Burger Draw and Sue Draw. These streams are tributaries to the perennial Powder River. Samples were collected bimonthly from three CBM discharge points and seven channel locations in Burger Draw and Sue Draw. Samples were also collected bimonthly from the Powder River above and below the confluence of Burger Draw. Before sample collection, the pH and electrical conductivity (EC) were measured in the field. Samples were transported to the laboratory and analyzed for alkalinity, major cations, and anions. From the measurement of sodium (Na), calcium (Ca), and magnesium (Mg), practical sodium adsorption ratio (SARp) and true sodium adsorption ratio (SARt) were calculated. Results suggest pH and EC of CBM discharge water was 7.1 and 4.3 dS/m, respectively. The CBM discharge water consisted of higher concentrations of sodium and alkalinity compared to other components. The pH of CBM discharge water increased significantly (p = 0.000) in the downstream channel of Burger Draw from 7.1 to 8.84 before it joined with the Powder River. Dissolved calcium concentration of CBM discharge water decreased significantly (p = 0.000) in the downstream channel water. Subsequently, SARp increased approximately from 24 to 29. The SARt also increased significantly (p = 0.001) in the downstream channel water. For instance, SARt of CBM discharge water increased from 32.93 to 45.5 downstream channels after the confluence of Sue Draw with the Burger Draw. The only significant difference in water chemistry above and below the confluence of Burger Draw with the Powder River was pH, which increased from 8.36 to 8.52. The significant increase in SAR values of CBM discharge water in Burger Draw and Sue Draw tributaries suggest a careful monitoring of salinity and sodicity is needed if CBM discharge water is used for irrigation in semi‐arid environments. Results discussed in this study will be useful to downstream water users who depend on water for irrigation.     

ENHANCING FECAL COLIFORM TOTAL MAXIMUM DAILY LOAD MODELS THROUGH BACTERIAL SOURCE TRACKING1

ABSTRACT: Surface water impairment by fecal coliform bacteria is a water quality issue of national scope and importance. In Virginia, more than 400 stream and river segments are on the Commonwealth's 2002 303(d) list because of fecal coliform impairment. Total maximum daily loads (TMDLs) will be developed for most of these listed streams and rivers. Information regarding the major fecal coliform sources that impair surface water quality would enhance the development of effective watershed models and improve TMDLs. Bacterial source tracking (BST) is a recently developed technology for identifying the sources of fecal coliform bacteria and it may be helpful in generating improved TMDLs. Bacterial source tracking was performed, watershed models were developed, and TMDLs were prepared for three streams (Accotink Creek, Christians Creek, and Blacks Run) on Virginia's 303(d) list of impaired waters. Quality assurance of the BST work suggests that these data adequately describe the bacteria sources that are impairing these streams. Initial comparison of simulated bacterial sources with the observed BST data indicated that the fecal coliform sources were represented inaccurately in the initial model simulation. Revised model simulations (based on BST data) appeared to provide a better representation of the sources of fecal coliform bacteria in these three streams. The coupled approach of incorporating BST data into the fecal coliform transport model appears to reduce model uncertainty and should result in an improved TMDL.     

煤矿安全预评价的未确知测度模型及应用

矿井自然灾害的安全预评价涉及不确定因素众多.本文根据未确知数学理论,建立了预评价指标体系、置信度识别准则及评分准则,构造了矿井安全预评价未确知测度模型,并对矿井的各个安全指标进行了定量分析.用上述方法对黄陵二号井自然灾害的评定结果与实际耦合较好,从而为煤矿建设项目的安全预评价开辟了一条新途径.     

基于CAN总线的分布式安全报警系统

CAN总线是一种多主站局部网络 ,支持分布式控制系统或实时控制系统的通信功能 ,具有检错功能强 ,抗干扰 ,传输速率高等优点 ,广泛应用于工业控制领域。笔者以CAN总线技术为基础 ,用单片机和个人计算机组成分布式安全报警系统 ,该系统具有开放性、全分散体系结构、安装维护简单等特点。笔者介绍了该系统的总体构成及其软件和硬件设计。试验结果表明 ,该系统实现了事故现场、住户与住宅小区三者联系的安全报警功能。系统稳定性好 ,实时性强 ,报警准确。     

给水管道振动信号的小波分析及消振研究

某核发电厂部分蒸汽和给水管道振动情况非常严重 ,以致影响到正常的安全生产。笔者从给水管道的测振出发 ,并利用 3层Daubechise对振动信号进行了小波消噪、滤波、重构处理 ,以找到影响管系振动的激励源的主要频域成分。进而利用比较成熟的结构分析软件ANSYS对管系进行了模态分析 ,得到系统的低阶固有频率和振型。根据管道振动的原因 ,在不改变管系主要特征的基础上 ,给出了简单易行的消振措施 ,实际运行情况表明消振方法效果良好。