应用漆酶SUKALacc脱色处理纺织染料

印染废水中含有大量的剩余染料,对生态环境构成了巨大威胁.漆酶能够氧化多种纺织染料使其脱色,在印染废水处理领域具有潜在的应用性.为了开发基于酶技术的印染废水处理工艺,利用商业化的漆酶制剂SUKALaccTM对5种常见纺织染料的脱色能力进行了测试,结果显示,SUKALaccTM对于这些测试的染料均具有脱色效果,脱色效率为14.85％～ 85.97％;此外,还考察了酶制剂浓度、染料浓度、温度和pH等因素对脱色效率的影响,确定了最优的反应条件;利用斜生栅藻(Scenedesmus obliquus)和大型溞(Daphnia magna)分别对酶处理后的染料毒性进行了测试,结果表明,酶制剂处理后的染料毒性减弱.这些实验结果为漆酶制剂实际应用于印染废水处理奠定了坚实基础.     

修复铬污染地下水的可渗透反应墙介质筛选

通过实验研究筛选出一种经济、高效的用于修复铬污染地下水的可渗透反应墙(PRB)介质。实验以铬污染地下水为研究对象,分别对Fe0、Fe0+石英砂和包覆型零价铁填料进行了筛选实验,选取处理效果好且经济可行的包覆型零价铁材料作为PRB反应介质。结果表明,以包覆型零价铁材料作为PRB反应介质,大大提高了铁粉的利用效率,且缓解了系统堵塞严重的问题。以包覆型零价铁材料作为PRB反应介质修复Cr(VI)污染地下水是可行的。     

多介质渗透反应格栅中氨氮的转化与存在形态

在利用渗透反应格栅技术修复地下水氨氮污染过程中,掌握氨氮在不同介质环境中的转化规律及存在形态对多介质渗透反应格栅中各介质作用及氮转化过程的控制十分重要.针对进水氨氮浓度约10 mg/L的模拟地下水,以天然河沙、释氧材料、斜发沸石及海绵铁为反应介质,设计了一套多介质渗透反应格栅模拟氨氮在各介质环境中的转化及归宿.结果表明,在天然河沙层,氨氮优先被河沙吸附固定,但去除量有限(△C＜1.5 mg/L),氨氮主要以离子态溶于模拟地下水.在好氧沸石层,氨氮经沸石吸附及生物硝化协同作用几乎被完全去除,该层出水氨氮浓度低于0.01 mg/L,且氮主要存在形态为硝酸盐氮(C=10～26.6 mg/L).在铁厌氧层,部分硝酸盐氮经海绵铁化学还原和生物反硝化作用,分别被转化为氨氮(△C=2～9.5 mg/L)和氮气(△C＜8 mg/L),其余硝酸盐氮以离子态继续存留于模拟地下水.     

Removal of two cationic dyes from a textile effluent by filtration-adsorption on wood sawdust

BACKGROUND: Wastewater from textile industry contains various contaminants such as dyes, surfactants and heavy metals. Textile dyes have synthetic origin and complex aromatic molecular structures that make them difficult to biodegrade when discharged in the ecosystem. The objective of this study was to examine the decolourisation of textile effluents containing cationic dyes by filtration-adsorption on wood sawdust from two different origins; fir as an example of a conifer tree, and beech as an example of a deciduous one, and to explain the adsorption mechanism. METHODS: The process of dye removal was applied to a synthetic effluent in batch mode. Adsorption experiments were performed by suspending sawdust in the effluent and analyzing the supernatant by spectrophotometry. The effectiveness of the treatment process was evaluated by measuring coloration. RESULTS AND DISCUSSION: Experimental results showed a significant potential for wood sawdust, especially coniferous sawdust, to remove cationic dyes from textile effluents. Adsorption kinetics was influenced by the initial dye concentration, nature and amount of sorbent as well as sorbent particle size. The adsorption followed a pseudo first-order kinetics. For both basic dyes, the Langmuir adsorption equation showed a better fit than the Freundlich equation. CONCLUSION: Filtration-adsorption using an inexpensive and readily available biosorbent provided an attractive alternative treatment for dye removal, and it does not generate any secondary pollution. Recommendations and Perspectives. Laboratory studies provide promising perspectives for the utilization of wood sawdust as renewable adsorbent for reducing pollution while enhancing the reuse of textile effluents. However, the treatment process needs to be applied to the other textile dye classes in order to be used on an industrial scale.     

水溶液中活性艳红KE-3B的臭氧超声联合脱除

采用臭氧/超声联合技术去除模拟废水中的活性艳红KE-3B。臭氧/超声处理前后KE-3B的紫外可见吸收谱没有明显的变化。臭氧/超声联合作用、单独臭氧化和单独超声处理脱除活性艳红KE-3B模拟废水5 min后的去除率分别为97%、73%和5%,表明臭氧/超声联合降解活性染料具有更高的氧化速率。实验研究了pH值、臭氧投加量、超声能量密度、反应温度对超声/臭氧降解活性艳红KE-3B反应速率的影响,在实验研究范围内,随着溶液初始pH的增大,KE-3B的去除率先增大后减小,超声能量密度的改变对KE-3B的去除影响不大,温度升高有利于氧化反应的进行。在溶液初始pH值为9.0,臭氧投加量3.2 g/h,超声能量密度176 W/L,反应温度20℃时,浓度为100 mg/L的活性艳红KE-3B溶液的去除率最高。     

有机絮凝剂对水中染料的絮凝作用探讨

本文在ＰＡＮ－ＤＣＤ对水中活性染料的絮凝脱色研究基础上,用ＩＲ分析以及平衡渗析实验探讨了ＰＡＮ－ＤＣＤ与多种染料的相互作用。     

交联壳聚糖／Cu2O复合颗粒可见光催化脱色活性艳红

利用壳聚糖对金属离子的吸附和螯合作用,通过简单的液相沉淀一还原过程一步原位合成了交联壳聚糖／Cu2O复合粒子。x射线衍射（XRD）和红外（FT—IR）测试结果表明,壳聚糖与Cu2O纳米微粒能有效复合。以活性艳红X-3B溶液为模拟印染废水,采用Langmuir-Hinshelwood假一级方程模拟交联壳聚糖／Cu2O复合粒子光催化脱色反应的动力学行为,从动力学角度系统研究染料初始浓度、反应体系pH、催化剂用量和反应体系气氛等因素对复合粒子可见光催化脱色反应速率的影响。结果表明,当染料溶液浓度较低时,光催化过程可视为假一级反应。降低活性艳红X-3B初始浓度和pH,增加催化剂用量和反应体系的含O2量都可显著增加光解脱色反应速率常数。相同条件下,与纯Cu2O相比,交联壳聚糖／Cu2O复合粒子对X-3B呈现出更好的吸附性和更高的可见光催化活性。     

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.     

土壤环境中活性X-3B红染料的吸附行为及影响因素

对土壤吸附活性X-3B红染料的速率进行了测定,表明可以划分为高速吸附、减速吸附、缓慢吸附和0(平衡)吸附4个阶段;但各土类在各不同的阶段,其吸附速率差异较大.通过对活性X-3B红染料的土壤吸附等温线的研究,发现其吸附行为与Langmuir方程相吻合;在此基础上的计算表明,该染料在土壤上的最大吸附量为:水稻土>红壤>棕壤>褐土.从环境因素的影响而论,模拟结果显示:当土壤有机质较低或气温下降,当土壤处于中性状态或水分过多和过少,均能通过减少其吸附量达到降低活性X-3B红染料在土壤环境中的积累.     

苯或甲苯对粒状铁还原三氯乙烯及其中间产物顺式二氯乙烯的影响

地下水中挥发性氯代烃和石油烃类(主要为苯、甲苯、乙苯和二甲苯,总称为BTEX)混合污染羽可用铁渗透反应格栅(Fe0-PRB)联合厌氧生物降解技术修复;在设计上游Fe0-PRB时,需考虑BTEX存在下是否需增加其厚度.采用柱实验方法研究了苯和甲苯在粒状铁反应系统中吸附平衡后,对粒状铁去除三氯乙烯(TCE)长期运行的影响.结果表明,苯或甲苯(浓度各1～2mg·L-1左右)存在时,TCE(2mg·L-1左右)的去除仍符合准一级反应动力学;苯和甲苯的存在分别使TCE的去除速率平均降低约15.1%和18.5%,而使cis-1,2-DCE的去除速率各提高约4.5%和42.8%.在Fe0-PRB的长期运行中,矿物沉淀的积累仍是影响TCE还原脱氯的主要因素,苯或甲苯对TCE还原脱氯的抑制仅表现在运行初期;无论有无苯和甲苯,TCE的氯代中间产物种类皆相同,其中以顺式二氯乙烯(cis-1,2-DCE)为主,并且各柱中cis-1,2-DCE均首先穿透,出水浓度为2～75μg·L-1,需以cis-1,2-DCE的水力停留时间来确定Fe0-PRB的厚度,因此在设计上游Fe0-PRB时,若仅考虑TCE的修复目标,不考虑cis-1,2-DCE对下游BTEX生物降解的影响,则不需增加Fe0-PRB厚度.