Oxidative treatment of simulated dyehouse effluent by uv and near-UV light assisted Fenton's reagent

UV/Fenton, near-UV-visible/Fenton, dark Fenton, and H₂O₂/UV reactions have been used to treat simulated dyehouse effluents representing wastewater from the textile dyeing and rinsing process. Experiments were carried out in a lab - scale photochemical reactor using concentrations of 0.5–25 mM H₂O₂, 0.04-0.5 mM Fe²⁺-ion and different dilutions of textile wastewater. To assess the extent of mineralization, decolourization kinetics and the effect of different fight sources on treatment efficiency, DOC, optical density at 254 nm and 600 nm wavelength and residual H₂O₂ concentrations were measured during the course of the advanced oxidation reactions. Comparative evaluation of the obtained results revealed that the decolourization rate increased with applied H₂O₂ and Fe²⁺-ion dose as well as the strength of the synthetic textile wastewater. The best results were obtained by the near - UV/visible/Fenton process with a decolourization rate constant of 1.57 min⁻¹, a UV_254nm reduction of 97% and a DOC removal of 41% at relatively low doses of the H₂O₂ oxidant and Fe²⁺-ion catalyst within 60 min treatment time.     

Fenton试剂催化氧化--混凝法处理焦化废水的实验研究

用Fenton试剂结合自制聚硅硫酸铝对焦化废水进行了催化氧化—混凝试验研究 ,选择了最佳的工作条件。结果表明 ,经氧化—混凝处理后废水的COD从 1 1 73mg/L降至 38.2mg/L ,去除率达 96 .7%。研究中还发现 ,Fenton试剂具有将废水的 pH值调节为 2 .5～ 3的特性 ,为该工艺实际处理焦化废水提供了科学依据     

催化氧化法治理钻井废水的研究

钻井废水是油气田开发过程中的一个重要污染源 ,因其具有污染物成分复杂 ,分布广等特点 ,对周围环境有很大的影响。以充30 #的钻井废水为处理对象 ,实验研究了类Fenton试剂催化氧化法处理工艺 ,考察了Fenton试剂投加量、反应条件、反应时间等单因数对处理效果的影响,实验确定了该处理工艺的最佳操作条件为 :H2O2为2500mg/L ,Fe2SO4·7H2O为70mg/L ,pH值为3.5 ,反应时间为80min,氧气的通入量为70min。废水中的主要污染物指标COD的去除率大于80 %     

苏通大桥结构健康状态评估技术研究与应用(3):主梁损伤定位

为提高基于模态参数的损伤识别方法的损伤敏感性和噪声鲁棒性,将多源数据融合技术引入到苏通大桥主梁损伤定位方法中。基于D-S证据理论对模态柔度和模态应变能指标进行数据融合,并以苏通大桥扁平钢箱梁为分析对象,对融合后损伤定位指标的应用效果进行了讨论。结果表明:基于数据融合的损伤定位方法具有较强的损伤敏感性,只需要较少的低阶模态信息就能识别主梁的早期损伤;数据融合后,损伤定位指标可以在较强的噪声环境下准确地识别斜拉桥钢箱梁的损伤,具有较好的工程实用性。     

芬顿试剂氧化对污泥脱水性能的影响

利用芬顿试剂调理污泥,以W_C(污泥滤饼含水率)和CST(毛细吸水时间)作为评价污泥脱水性能的指标,通过分析污泥中各层ρ(EPS)(EPS为胞外聚合物)和上清液中小分子有机物质量浓度来阐明污泥脱水性能的变化. 结果表明:芬顿试剂调理可促进EPS氧化分解,TB-EPS(紧密结合的胞外聚合物)破解转化为LB-EPS(松散结合的胞外聚合物)和S-EPS(上清液层胞外聚合物),大幅降低W_C和CST. 试验中当pH为4,w(H₂O₂)和 w(Fe2+)均为40 mg/g时,ρ(EPS)降低了33.04%,W_C和CST分别降至63.36%和28.7 s. Pearson相关性分析表明,ρ(TB-EPS)与W_C和CST均存在显著的正相关性(P＜0.01),是影响污泥脱水性能的重要因素,而ρ(LB-EPS)和ρ(S-EPS)与污泥脱水性能的相关性较低. 液相色谱分析表明,随着芬顿试剂投加量的增大,EPS等有机物分解程度增大,污泥上清液中小分子有机物种类明显增多,其质量浓度显著升高,ρ(甲酸)和ρ(乙酸)分别由原污泥的52.72、15.99 mg/L升至446.05、522.36 mg/L.      

Application of water extract of slippery elm tree leaves as a natural reagent for selective spectrophotometric determination of trace amounts of molybdenum(VI) in environmental water samples

A novel spectrophotometric method for the determination of molybdenum(VI) by using a natural reagent, water extract of slippery elm tree leaves, is developed. Molybdenum(VI) reacts with this natural reagent to form an orange colored product. The formed product shows maximum absorbance at 418 nm with a molar absorptivity value of 0.57 × 10⁴ L mol^?1 cm^?1, and this method is linear in the 0.4–10 mg L^?1 concentration range. The detection limit value was found to be 0.0350 mg L^?1. The proposed method is simple, clean, low cost, selective, and sensitive. It was applied to the analytic samples with satisfactory results.     

深部条件下的煤岩钻孔喷孔试验研究

为了研究深部条件下的煤岩体动力显现特征规律,运用钻孔喷孔试验系统进行了不同载荷作用下的钻孔喷孔试验,测试并分析比较煤试样在试验过程中的应力、应变、钻屑量、声发射等参数。结果表明:只有当煤样加载压力超过某一临界值后,才会发生钻孔喷孔现象;加载压力越大,煤试件的钻屑量越多,钻孔喷孔次数越多;同时,喷孔时伴随较大煤岩颗粒喷出,钻孔喷孔是一个能量瞬间释放的过程,侧向应力和应变在能量释放瞬间会经历突然减小或经过短暂的增加后骤然减小的过程,与钻孔喷孔事件相对应;声发射事件除在钻孔周围分布比较密集外,每个试件也有呈条带状分布的区域。声发射事件数、振铃数、能量等都随着加载时间的增加而增加,在喷孔阶段更加明显。试验结果有效揭示了钻孔喷孔过程。     

Numerical study on the ozone formation inside street canyons using a chemistry box model

Tropospheric ozone is a secondary air pollutant produced in the presence of nitrogen oxides (NO_x),volatile organic compounds (VOCs),and solar radiation.In an urban environment,ground-level vehicular exhaust is the major anthropogenic source of ozone precursors.In the cases of street canyons,pollutant dilution is weakened by the surrounding buildings that creates localized high concentration of NO_x and VOCs,and thus leads to high potential of ozone formation.By considering the major physical and chemica...     

微波诱导Fenton试剂氧化降解水中对硝基氯苯

采用微波辐射诱导Fenton氧化工艺处理对硝基氯苯模拟废水。考察了H2O2用量、Fe2+用量、溶液pH、微波辐射时间、微波功率对降解效果的影响;比较了微波诱导Fenton氧化法和单纯的Fenton氧化法对对硝基氯苯的去除效果。结果表明,微波辐射不仅可以提高对硝基氯苯的去除效率,还可促进对硝基氯苯的矿质化,大大提高COD去除率,并缩短反应时间。微波诱导Fenton氧化降解对硝基氯苯的适宜工艺条件为:H2O2和Fe2+用量分别为3.0g/L和160mg/L、pH为3、微波功率为800W、微波辐射时间为10min。在此工艺条件下,对硝基氯苯和COD的去除率分别可达98.9%和90.8%。     

太阳光Fenton氧化对含酚废水生物降解影响研究

研究了太阳光Fenton氧化预处理对含酚废水生物降解性的影响及太阳光Fenton氧化-生化法联合工艺对煤气含酚废水的处理效果。结果表明,煤气含酚废水和模拟含酚废水的生物降解性均较差,太阳光Fenton氧化预处理可明显提高含酚废水的生物降解性,随着H2O2投加量的增加,废水的BOD5/COD比值逐渐增大,生物降解性明显增强。煤气含酚废水直接进行生化处理的COD和挥发酚去除率均较低。当太阳光Fenton氧化过程H2O2用量为22.5%理论投加量时,采用太阳光Fenton氧化-生化法联合工艺可使煤气含酚废水的COD由1357mg/L降低至104mg/L,挥发酚由198.2mg/L降低至0.47mg/L,COD和挥发酚均达到国家二级排放标准。