摩托车后轮毂压铸模设计

摩托车后轮毂压铸模具精度要求高 ,且结构复杂。为满足铸件的技术要求 ,要合理选用压铸设备 ,合理地设计模具结构。分析了摩托车后轮毂的结构特点 ,介绍了摩托车后轮毂压铸模的结构 ,并详细说明了模具浇注系统、溢流系统、冷却系统、推出机构的设计。     

The effect of extending graduated driver licensing to older novice drivers in Indiana

Introduction: Graduated driver licensing (GDL) systems have been shown to reduce rates of crashes, injuries, and deaths of young novice drivers. However, approximately one in three new drivers in the United States obtain their first driver’s license at age 18 or older, and thus are exempt from most or all provisions of GDL in most states. Method: In July 2015, the state of Indiana updated its GDL program, extending its restrictions on driving at night and on carrying passengers during the first 6 months of independent driving, previously only applicable to new drivers younger than 18, to all newly-licensed drivers younger than 21 years of age. The current study examined monthly rates of crashes per licensed driver under the affected conditions (driving at night and driving with passengers) among Indiana drivers first licensed at ages 18, 19, and 20 under the updated GDL system compared with drivers licensed at the same ages under the previous GDL system. We used Poisson regression to estimate the association between the GDL system and crash rates, while attempting to control for other factors that might have also influenced crash rates. We used linear regression to estimate the association between the GDL system and the proportion of all crashes that occurred under conditions restricted by the GDL program. Results: Results showed, contrary to expectations, that rates of crashes during restricted nighttime hours and with passengers were higher among drivers licensed under the updated GDL system. This mirrored a statewide increase in crash rates among drivers of all ages over the study period and likely reflected increased overall driving exposure. The proportions of all crashes that were at night or with passengers did not change. Practical Applications: More research is needed to understand how older novice drivers respond when GDL systems originally designed for younger novice drivers are applied to them.     

Effect of enhanced seat belt reminders on driver fatality risk

Objective

Enhanced seat belt reminders in automobiles have been shown to increase belt use rates by approximately 3 percentage points. The objective of this study was to estimate the effect of enhanced seat belt reminders on driver fatality risk.

Method

Data included all passenger vehicle driver deaths and vehicle registration counts in the United States for calendar years 2000-2007. Driver fatality rates per vehicle registration per year were compared for otherwise identical vehicle models with and without enhanced seat belt reminders.

Results

Driver fatality rates were 6% lower for vehicles with enhanced seat belt reminders compared with vehicles without enhanced belt reminders. After adjusting for vehicle age differences, the estimated effect of enhanced belt reminders on driver fatality risk ranged from a 9% reduction for General Motors vehicles to a 2% increase for Honda vehicles. Combining all manufacturers, enhanced belt reminders reduced fatality risk by approximately 2%. Although not statistically significant, the 2% reduction in fatality risk agrees with what should be expected from a 3 percentage point increase in seat belt use rates.

Conclusions

Enhanced seat belt reminders have raised driver belt use rates and reduced fatality rates, but more aggressive systems may be needed for some drivers. It can be inferred that nonfatal injury rates also have been reduced.

Impact on Industry

Manufacturers should be encouraged to put enhanced seat belt reminders on all vehicles as soon as possible.     

Fatal hit-and-run crashes: Factors associated with leaving the scene

Introduction: Hit-and-run crashes are a criminal offense that leave the victim without prompt medical care or the ability to receive financial compensation. Method: The purpose of the current study was to quantify the factors associated with the probability that a driver leaves the scene of a fatal crash, using multiple imputation to incorporate information from drivers who were never apprehended and thus whose characteristics were unknown. Results: The results of this study show that in addition to driver, vehicle, and environmental factors having significant impacts on the likelihood of a driver fleeing the scene, economic and demographic factors are important as well. Practical Applications: This analysis allows for a more holistic understanding of hit-and-run crashes and informs potential countermeasures and future research.     

Investigation of seat belt use among the drivers of different education levels

Seat belt use habit has been investigated according to the education level of drivers. Copies of a questionnaire were distributed to 1000 participants of four different education levels. Factors such as seat belt usage habit, restricting factors and crash data have been investigated. Data have been analyzed with SPSS 15.0 software. Increased level of education leads to increased seat belt usage, lower numbers of crashes and crash severities. The factors restricting seat belt use are lack of habit, discomfort and short distance driving. The use of precaution signal and increases in comfort can increase seat belt usage. The primary and high school education on traffic safety and seat belt usage has been serving the purpose.     

Effect on fatality risk of changing from secondary to primary seat belt enforcement

BACKGROUND: Most seat belt use laws originally passed in the United States contained language restricting enforcement to drivers already stopped for some other reason. States that have since removed this secondary enforcement restriction have reported increased seat belt use. The purpose of the present study was to estimate the effect of these law changes on driver fatality rates. METHOD: Trends in passenger vehicle driver death rates per billion miles traveled were compared for 10 states that changed from secondary to primary seat belt enforcement and 14 states that remained with secondary enforcement. RESULTS: After accounting for possible economic effects and other general time trends, the change from secondary to primary enforcement was found to reduce annual passenger vehicle driver death rates by an estimated 7% (95% confidence limits 3.0-10.9). CONCLUSION: The majority of U.S. states still have secondary enforcement laws. If these remaining secondary laws were amended, an estimated 696 deaths per year could be prevented.     

Effectiveness of lowering the blood alcohol concentration (BAC) limit for driving from 0.10 to 0.08 grams per deciliter in the United States

Objective: The current study evaluates of the effects of lowering the blood alcohol concentration (BAC) limit from 0.10 to 0.08?g/dL across all 50 states in the United States. Our objectives were to (1) estimate the effects of the 0.08?g/dL BAC limit on drinking driver fatal crash rates; (2) compare the effects from early-adopting states to the effects of late-adopting states; (3) determine the effects on drivers with low BACs (0.01–0.07?g/dL) and high BACs (0.08+ g/dL); and (4) estimate the lives saved since 1983 due to the adoption of 0.08?g/dL BAC laws.

Methods: Our study examined annual data from the Fatality Analysis Reporting System (FARS) for each jurisdiction from 1982 through 2014. Our basic outcome measure was the ratio of drinking drivers (BAC ≥0.01?g/dL) to nondrinking drivers (BAC?=?0.00?g/dL). Covariates included 0.10 BAC laws, administrative license revocation (ALR) laws, seat belt laws, minimum legal drinking age (MLDA) laws, and unemployment rates. We utilized autoregressive integrated moving average (ARIMA) models for each state, where the implementation date of the law was modeled as a zero-order transfer function in the series, in addition to any extant trends that may have been occurring simultaneously. Before determining the specific impact of the implementation of 0.08?g/dL BAC laws, we conducted a time series analysis for each state. We tested for between-state mediating factors relating to our covariates.

Results: A total of 38 of the 51 jurisdictions showed that lowering the BAC limit was associated with reduced drinking driver fatal crash ratios, with 20 of those reductions being significant. The total effects showed a 10.4% reduction in annual drinking driver fatal crash rates, which is estimated to have saved an average of 1,736 lives each year between 1983 and 2014 and 24,868 lives in total. Implementing a BAC limit of 0.08?g/dL had significant impacts on both high- and low-BAC fatal crash ratios. Though early-adopting jurisdictions (1983–1999) demonstrated a larger decrease in fatal drinking driver crash ratios than did late-adopting jurisdictions (2000–2005), the results were not statistically significant (P?>?.05).

Conclusions: Our study of the effects of lowering the BAC from 0.10 to 0.08?g/dL in the United States from 1982 to 2014 showed an overall effect of 10.4% on annual drinking driver fatal crash rates, in line with other multistate studies. This research provides strong evidence of the relationship between lowering the BAC limit for driving and the general deterrent effect on impaired-driving fatal crash rates.     

Seat strength in rear body block tests

Purpose: This study collected and analyzed available testing of motor vehicle seat strength in rearward loading by a body block simulating the torso of an occupant. The data were grouped by single recliner, dual recliner, and all belts to seat (ABTS) seats.

Methods: The strength of seats to rearward loading has been evaluated with body block testing from 1964 to 2008. The database of available tests includes 217 single recliner, 65 dual recliner, and 18 ABTS seats. The trends in seat strength were determined by linear regression and differences between seat types were evaluated by Student's t-test. The average peak moment and force supported by the seat was determined by decade of vehicle model year (MY).

Results: Single recliner seats were used in motor vehicles in the 1960s to 1970s. The average strength was 918 ± 224 Nm (n = 26) in the 1960s and 1,069 ± 293 Nm (n = 65) in the 1980s. There has been a gradual increase in strength over time. Dual recliner seats started to phase into vehicles in the late 1980s. By the 2000s, the average strength of single recliner seats increased to 1,501 ± 335 Nm (n = 14) and dual recliner seats to 2,302 ± 699 Nm (n = 26). Dual recliner seats are significantly stronger than single recliner seats for each decade of comparison (P < .001). The average strength of ABTS seats was 4,395 ± 1,185 in-lb for 1989–2004 MY seats (n = 18). ABTS seats are significantly stronger than single or dual recliner seats (P < .001). The trend in ABTS strength is decreasing with time and converging toward that of dual recliner seats.

Conclusions: Body block testing is an quantitative means of evaluating the strength of seats for occupant loading in rear impacts. There has been an increase in conventional seat strength over the past 50 years. By the 2000s, most seats are 1,700–3,400 Nm moment strength. However, the safety of a seat is more complex than its strength and depends on many other factors.