有机负荷和溶解氧的变化对SBR污泥膨胀的影响及控制方法

本文研究SBR工艺处理汽车电泳废水在不同有机负荷、溶解氧条件下污泥膨胀的现象 ,分析膨胀发生机理 ,分别提出控制方法。实验结果表明 ,在低、中、高负荷时 ,只要溶解氧发生变化 ,均有可能发生膨胀。低负荷、正常溶解氧时发生的膨胀可以通过前联好氧生物选择器加以控制 ;中负荷、低溶解氧及高负荷、低溶解氧活性污泥发生膨胀时可以通过强化曝气得到控制     

186菌生物流化床处理甲醇废水

用三相生物流化床工艺处理甲醇废水COD_(cr)容积负荷达4.24～12.32kg/m~3·d,去除率达82.7％～93.1％;甲醇容积负荷达1.8～3.9kg/m~3·d,去除率达81.4％～98.1％。加186菌种后,甲醇的容积负荷可提高到3.02～3.36kg/m~3·d,COD_(cr)去除率可达到89.3～96.7％。     

生物絮凝在校园生活污水处理中的应用研究

将高效生物絮凝剂产生茵V3,V11,V13应用于校园生活污水处理中,可有效提高水处理絮凝效果。试验结果表明：当SBR反应器曝气时间3h,投菌量50g/L,温度28—30℃,V3对OD550,NH3-N,COD,浊度去除率分别达91．5％．82％,91．3％,93．5％,V11对OD550,COD,浊度去除率分别达89．1％,91．5％,95．1％,对NH3-N去除率较低;V13对OD550,COD,浊度去除率分别达90．7％,93.3％,92．1％,对NH3-N几乎没有去除;3株菌混合培养,3株菌形成一种互生关系．应用于水处理中当SBR曝气时间3h,投菌量50g／L,温度28～30℃,对OD550,NH3-N,COD,浊度去除率分别达93.3％,86．7％。93．5％,96％,同时能有效的改变污泥沉降性能．     

甲基叔丁基醚装车安全系统的改进

分析了甲基叔丁基醚装车系统存在的隐患,采取了规范储罐与装车点的安全距离、增设装车操作平台、配备消静电器及鹤管液下装车等措施,保证了装车的安全性。     

加载速率对钢筋混凝土梁动态性能的影响

引入钢筋和混凝土的应变率效应,利用有限元分析软件ABAQUS中的显示动力分析模块ABAQUA/Explicit,对钢筋混凝土梁在不同单调加载速率下的受力性能进行了数值模拟.通过比较不同加载速率下的分析结果,探讨了地震作用下的动态荷载对钢筋混凝土梁受力性能的影响.分析结果表明,在动态荷载作用下,钢筋混凝土梁的受力性能有显...     

大空间单跨门式刚架结构抗火性能影响因素的客观权重研究

火灾时的大空间单跨门式刚架结构抗火性能,受钢构件温升和结构整体抗火临界温度的影响.本文通过对无保护大空间建筑钢构件温升数据的统计分析,获得包含火源功率、建筑体积、钢构件截面形状系数的钢构件温升拟合公式;结合单跨门式刚架结构整体抗火临界温度数据的统计分析,获得包含荷载比、柱高和系数K的结构整体抗火临界温度拟合公式;通过分...     

VALIDATION OF THE SWAT MODEL ON A LARGE RWER BASIN WITH POINT AND NONPOINT SOURCES1

ABSTRACT: The State of Texas has initiated the development of a Total Maximum Daily Load program in the Bosque River Watershed, where point and nonpoint sources of pollution are a concern. Soil Water Assessment Tool (SWAT) was validated for flow, sediment, and nutrients in the watershed to evaluate alternative management scenarios and estimate their effects in controlling pollution. This paper discusses the calibration and validation at two locations, Hico and Valley Mills, along the North Bosque River. Calibration for flow was performed from 1960 through 1998. Sediment and nutrient calibration was done from 1993 through 1997 at Hico and from 1996 through 1997 at Valley Mills. Model validation was performed for 1998. Time series plots and statistical measures were used to verify model predictions. Predicted values generally matched well with the observed values during calibration and validation (R²≥ 0.6 and Nash‐Suttcliffe Efficiency ≥ 0.5, in most instances) except for some underprediction of nitrogen during calibration at both locations and sediment and organic nutrients during validation at Valley Mills. This study showed that SWAT was able to predict flow, sediment, and nutrients successfully and can be used to study the effects of alternative management scenarios.     

硫化物生物氧化脱硫技术研究现状

介绍了近年来国内外硫化物生物氧化为单质硫的各种脱硫技术.分析总结了硫化物生物氧化为单质硫工艺的各种影响因素,包括氧硫比、溶解氧浓度、硫化物浓度、化学氧化、微生物菌种、pH值、温度等因素.提出了生物氧化脱硫技术的发展前景.该技术将脱硫和单质硫的回收和为一体,是一种安全、低成本将含硫废液变废为宝的工艺技术.     

Climate Sensitivity of Phosphorus Loadings to an Urban Stream

We investigate the sensitivity of phosphorus loading (mass/time) in an urban stream to variations in climate using nondimensional sensitivity, known as elasticity, methods commonly used by economists and hydrologists. Previous analyses have used bivariate elasticity methods to represent the general relationship between nutrient loading and a variable of interest, but such bivariate relations cannot reflect the complex multivariate nonlinear relationships inherent among nutrients, precipitation, temperature, and streamflow. Using fixed‐effect multivariate regression methods, we obtain two phosphorus models (nonparametric and parametric) for an urban stream with high explanatory power that can both estimate phosphorus loads and the elasticity of phosphorus loading to changes in precipitation, temperature, and streamflow. A case study demonstrates total phosphorus loading depends significantly on season, rainfall, combined sewer overflow events, and flow rate, yet the elasticity of total phosphorus to all these factors remains relatively constant throughout the year. The elasticity estimates reported here can be used to examine how nutrient loads may change under future climate conditions.     

UNCERTAINTY ANALYSIS OF BMP EFFECTWENESS FOR CONTROLLING NITROGEN FROM URBAN NONPOINT SOURCES1

ABSTRACT: The effectiveness of urban Best Management Practices (BMPs) in achieving the No-Net-Increase Policy (NNTP), a policy designed to limit nonpoint nitrogen loading to Long Island Sound (US), is analyzed. A unit loading model is used to simulate annual nitrogen exported from the Norwalk River watershed (Connecticut) under current and future conditions. A probabilistic uncertainty analysis is used to incorporate uncertainty in nitrogen export coefficients and BMP nitrogen removal effectiveness. The inclusion of uncertainty in BMP effectiveness and nitrogen export coefficients implies that additional BMPs, or BMPs with a greater effectiveness in nitrogen removal, will be required to achieve the NNIP. Even though including uncertainty leads to an increase in BMP implementation rates or BMP effectiveness, this type of analysis provides the decision maker with a more realistic assessment of the likelihood that implementing BMPs as a management strategy will be successful. Monte Carlo simulation results indicate that applying BMPs to new urban developments alone will not be sufficient to achieve the NNIP since BMPs are not 100 percent effective in removing the increase in nitrogen caused by urbanization. BMPs must also be applied to selected existing urban areas. BMPs with a nitrogen removal effectiveness of 40–60 percent, probably the highest level of removal that can be expected over an entire watershed, must be applied to at least 75 percent of the existing urban area to achieve the NNIP This high rate of application is not likely to be achieved in urbanized watersheds in the LIS watershed; therefore, additional point source control will be necessary to achieve the NNIP