健康风险评价的基本程序与方法

介绍了健康风险评价方法的发展过程,它对环境管理的意义以及进行评价的基本程序和方法。对评价的四个阶段:危害鉴定,剂量-反应关系评估、暴露评估、风险评定等所涉及的基本概念和计算公式作了较为详尽的解释。      

高斯扩散衍生公式在环境风险评价中的应用

为在大气环境风险评价中客观地确定危险源、估算各类突发性事故的危害,在高斯扩散模型基础上,通过严格的数学推导,得出一整套适用于鉴别与评估大气环境突发事故危害后果（危害区、危害期等）的定量估算公式,使用方便,结果精确。所有公式使用条件与高斯扩散模型相同,可用于直接求取任意浓度等值线精确的时、空位置及其特征点位置。作为高斯扩散模型的衍生公式,可广泛应用于风险工程设计、风险工程保险、环境风险评价、环境风险管理、环境影响评价与环境规划等各个领域     

珠三角某石化园区VOCs排放特征及影响评价

石化行业是挥发性有机物(VOCs)的重要来源之一,然而,当前石化行业VOCs研究多集中于炼油厂VOCs排放特征分析,针对有机化工和合成材料等子行业的研究较为缺乏.选取珠三角地区某石化园区中石油炼制、合成材料和有机化工3个主要行业的8家代表性企业和园区周围敏感点为研究对象,采集分析了包含22种含氧VOCs(OVOCs)在...     

Environmental risk assessment for trisodium [S,S]-ethylene diamine disuccinate, a biodegradable chelator used in detergent applications

Environmental safety data are presented for [S,S]-Ethylene Diamine Disuccinate ([S,S]EDDS), a new, biodegradable, strong transition metal chelator. An environmental risk assessment for its use in detergent applications, which takes into account the chelating properties of [S,S]-EDDS, is proposed.

A property of [S,S]-EDDS that distinguishes it from other strong transition metal chelators is its, “ready” and transparent (no recalcitrant metabolites) biodegradation profile. Because its sorption to activated sludge solids is low ( Kp of 40 1/kg), removal of [S,S]EDDS during sewage treatment, which is greater than 96% as determined by the Continuous Activated Sludge test , is mainly ascribed to biodegradation. At projected use volumes in detergent applications [S,S] - EDDS predicted steady-state concentration in rivers leaving the mixing zone will be below 5 pg/I due to rapid biodegradation. [S,S]-EDDS exhibits low toxicity to fish and Daphnia ( both EC₅₀s> 1000 mg/l). By contrast, due to limitation of the algal test for chelators apparent toxicity was observed (EC₅₀ = 0.290 mg/l, NOEC - No observable Effect Concentration = 0.125 mg/l). Schowanek et al. [1] demonstrated that this is not toxicity sensu stricto but a chelation effect of trace metals in the test medium and of resulting essential nutrients limitation. This requires specific attention when the results of algal toxicity are to be extrapolated to a field situation to perform realistic risk assessment. Metal speciation calculations, using MINEQL+, show that at the predicted environmental concentrations of [S,S] - EDDS (1–5 μg/l), such a chelation effect would be insignificant. These calculations allow to estimate the NOEC for chelation effects in the field to be in the range of 0.250-0.500 mg/l, depending on the background water chemistry. These values are well above the laboratory NOEC.

An environmental risk assessment was performed using the EUSES (1.0) program. EUSES is currently the EU recommended tool for conducting risk assessments (TGD 1995). It was applied to estimate the river water and soil concentrations from production, formulation and private use life stages. The estimated PEC/PNEC ratio in all relevant environmental compartments is smaller than 1, indicating “no immediate concern” at the anticipated usage level.     

An Exploratory Study of Meanings of Risk Control for Long Term and Acute Effect Occupational Health and Safety Risks in Small Business Construction Firms

A qualitative study of employers' and employees' meanings of occupational health and safety (OHS) risk control was conducted among a sample of small businesses engaged in the Australian construction industry. Two OHS risks relevant to the construction industry were selected for study. One risk (falls from height) represented an immediate consequence, whereas the other (occupational skin disease) represented a long-term health effect. Meanings of the sources and control for these risks were explored during in-depth interviews. Participants perceived the immediate effect, falls from height OHS risk, as being more important in their workplaces than the delayed effect, skin disease OHS risk. The risk of falls from height was perceived to be controllable but requiring a great deal of effort to prevent, whereas there was a fatalistic resignation to the risk of occupational skin disease. Meanings of risk control for both occupational skin disease and falls from height focused on individual rather than technological risk controls. Organizational barriers to the adoption of technological OHS risk controls in the construction industry were identified.     

煤矿危险源分类分级与预警

关于危险源概念目前尚无准确的理论界定,为此,笔者试图阐明危险源分为固有型危险源和触发型危险源的新观点,提出并说明了对不同类型危险源应采用的不同的辩识与分级方法。在此基础上,结合企业实际,提出了危险源预警思想和模块设计方法。所有这些,对完善安全管理理论,提高煤矿安全管理水平具有理论意义和实用价值     

静电喷漆作业的防火防爆

静电喷漆工艺应用普及很快,但其生产过程的火灾危险性属甲类。其火灾危险主要在于使用的漆料或有机溶剂,喷漆作业中存在电火花、静电火花、高温热表面、自然发热等引火源。为防止火灾爆炸发生,要注重防火防爆安全管理和强化必要的安全技术措施。     

一种现代化的安全管理方法──安全管理信息系统

安全管理信息系统是现代化安全管理中,安全信息综合处理的枢纽,是安全信息管理、安全决策的关键。通过建立以安技部门为信息处理中心、各危险岗位和各专业部门为终端的安全管理信息系统网络,从而由安全信息反馈来推进对隐患的不断检查、整改和监控,形成闭环管理,力求把安全管理从传统的事后追踪变为事前的预防控制,使安全管理工作逐步走向科学化、系统化和规范化,对提高目前安全管理水平具有实际意义。     

中国西部成都的区域经济特征

本文介绍了西部成都的区位环境、农业经济、交通运输等状况,认为成都具有成为中国西部中心城市的可能性     

COMPARISON OF MODELS FOR ESTIMATING FLOOD QUANTILES IN NEW HAMPSHIRE AND VERMONT1

We develop and compare three regression models for estimating flood quantiles at ungaged stream reaches in New Hampshire and Vermont. These models emerge from systematic analysis and validation of relations between flood magnitude and six candidate predictors reflecting basin size, topography, and climate and channel size at 36 gaging stations with record lengths exceeding 20 years. Of the candidate predictors, bank full width is most highly correlated with flood magnitude and the best prediction equation is based on width. Thus channel geometry is closely related to the current hydrologic regime in spite of geologically recent glaciation and apparently non-alluvial bank materials. We also develop models that use information obtainable from maps or GIS. The best of these uses drainage area and drainage-basin elevation as predictors, but it is substantially less precise than the width-based relation. A third relation using only drainage area as a predictor is even less precise but may be useful for some purposes. No other single predictors or combinations yielded useful predictions, although some had been included in previously-established models for the region. Model comparison included examination of residuals generated by regression using one-at-a-time suppression of data points and comparison with precision obtainable with gaging records of varying lengths.