POPs废物处置技术多目标决策筛选研究

采用层次分析法对国际上较为成熟的9种POPs废物处置技术进行综合评价,筛选出适合我国的POPs废物处置技术. 从经济指标、环境指标和技术指标3个影响因素建立递阶层次结构模型,每个指标又细分为若干个子准则. 根据模型及评价指标体系设计专家咨询表,发放给POPs相关领域的专家打分. 采用matlab对评价结果进行数值分析,得到9种处置技术的总权重,其中分值最高的处置技术有:水泥窑共处置0.174 8,高温焚烧0.172 7;其次是安全填埋0.107 1,热解吸0.107 0,原位玻璃化0.103 0;最后是深井灌注0.086 9,超临界水氧化0.084 1,碱催化脱氯0.082 3,碱金属还原0.082 3.表明高温焚烧和水泥窑共处置是目前我国POPs废物处置技术的较佳之选.      

放射性废物处置库顶盖毛细屏障的研究进展

放射性废物处置库工程屏障的设计对处置库中放射性废物的长期安全具有重要意义.毛细屏障作为处置库顶盖的工程屏障之一,已在国内外得到广泛的应用.阐述了放射性废物处置库顶盖毛细屏障设置的意义,对近年来毛细屏障的一些研究进展进行了分析,提出了一些尚待解决的问题.     

Electroosmotic dewatering of dredged sediments: bench-scale investigation

The Indiana Harbor (Indiana, USA) has not been dredged since 1972 due to lack of a suitable disposal site for dredged sediment. As a result of this, over a million cubic yards of highly contaminated sediment has accumulated in the harbor. Recently, the United States Army Corps of Engineers (USACE) has selected a site for the confined disposal facility (CDF) and is in the process of designing it. Although dredging can be accomplished rapidly, the disposal in the CDF has to be done slowly to allow adequate time for consolidation to occur. The sediment possesses very high moisture content and very low hydraulic conductivity, which cause consolidation to occur slowly. Consolidation of the sediment is essential in order to achieve adequate shear strength of sediments and also to provide enough air space to accommodate the large amount of sediment that requires disposal. Currently, it has been estimated that if a one 3-foot (0.9-m) thick layer of sediment was disposed of at the CDF annually, it would take approximately 10 years to dispose of all the sediment that is to be dredged from the Indiana Harbor. This study investigated the feasibility of using an electroosmotic dewatering technology to accelerate dewatering and consolidation of sediment, thereby allowing more rapid disposal of sediment into the CDF. Electroosmotic dewatering essentially involves applying a small electric potential across the sediment layer, thereby inducing rapid flow as a result of physico-chemical and electrochemical processes. A series of bench-scale electrokinetic experiments were conducted on actual dredged sediment samples from the Indiana Harbor to investigate dewatering rates caused by gravity alone, dewatering rates caused by gravity and electric potential, and the effects of the addition of polymer flocculants on dewatering of the sediments. The results showed that electroosmotic dewatering under an applied electric potential of 1.0VDC/cm could increase the rate of dewatering and consolidation by an order of magnitude as compared to gravity drainage alone. Amending the sediment with polymers at low concentrations (0.5-1% by dry weight) will enhance this dewatering process; however, the optimal polymer concentration and the cost-effectiveness of using polymers should be investigated further.     

废荧光灯的环境污染对策探讨

废荧光灯管中的有害物质如果处置不当,会对人体健康和环境造成危害。目前国内大部分废荧光灯管未得到无害化处置,主要在指定的法规、有效的政策以及完善的运营机制方面存在很多弊端,应引起社会各界的关注和政府部门的重视。本文结合国内外废荧光灯管回收处置现状,针对存在的问题,提出源头控制、分类收集、多渠道回收、建立资金及资金补贴机制以及技术手段措施,为从根本上解决废旧灯管回收难的问题,并探索社会源危险废物的管理提供对策建议。     

Hyperspectral Characteristics of Canopy Components and Structure for Phenological Assessment of an Invasive Weed

Spectral reflectance values of four canopy components (stems, buds, opening flowers, and postflowers of yellow starthistle (Centaurea solstitialis)) were measured to describe their spectral characteristics. We then physically combined these canopy components to simulate the flowering stage indicated by accumulated flower ratios (AFR) 10%, 40%, 70%, and 90%, respectively. Spectral dissimilarity and spectral angles were calculated to quantitatively identify spectral differences among canopy components and characteristic patterns of these flowering stages. This study demonstrated the ability of hyperspectral data to characterize canopy components, and identify different flowering stages. Stems had a typical spectral profile of green vegetation, which produced a spectral dissimilarity with three reproduction organs (buds, opening flowers, and postflowers). Quantitative differences between simulated flower stages depended on spectral regions and phenological stages examined. Using full-range canopy spectra, the initial flowering stage could be separated from the early peak, peak, and late flowering stages by three spectral regions, i.e. the blue absorption (around 480 nm) and red absorption (around 650 nm) regions and NIR plateau from 730 nm to 950 nm. For airborne CASI data, only the red absorption region and NIR plateau could be used to identify the flowering stages in the field. This study also revealed that the peak flowering stage was more easily recognized than any of the other three stages.     

Mapping the Spatial Variability of Plant Diversity in a Tropical Forest: Comparison of Spatial Interpolation Methods

Knowledge of the spatial distribution of plant species is essential to conservation and forest managers in order to identify high priority areas such as vulnerable species and habitats, and designate areas for reserves, refuges and other protected areas. A reliable map of the diversity of plant species over the landscape is an invaluable tool for such purposes. In this study, the number of species, the exponent Shannon and the reciprocal Simpson indices, calculated from 141 quadrat sites sampled in a tropical forest were used to compare the performance of several spatial interpolation techniques used to prepare a map of plant diversity, starting from sample (point) data over the landscape. Means of mapped classes, inverse distance functions, kriging and co-kriging, both, applied over the entire studied landscape and also applied within vegetation classes, were the procedures compared. Significant differences in plant diversity indices between classes demonstrated the usefulness of boundaries between vegetation types, mapped through satellite image classification, in stratifying the variability of plant diversity over the landscape. These mapped classes, improved the accuracy of the interpolation methods when they were used as prior information for stratification of the area. Spatial interpolation by co-kriging performed among the poorest interpolators due to the poor correlation between the plant diversity variables and vegetation indices computed by remote sensing and used as covariables. This indicated that the latter are not suitable covariates of plant diversity indices. Finally, a within-class kriging interpolator yielded the most accurate estimates of plant diversity values. This interpolator not only provided the most accurate estimates by accounting for the indices' intra-class variability, but also provided additional useful interpretations of the structure of spatial variability of diversity values through the interpretation of their semi-variograms. This additional role was found very useful in aiding decisions in conservation planning.     

Integrating Remote Sensing Approach with Pollution Monitoring Tools for Aquatic Ecosystem Risk Assessment and Managment: A Case Study of Lake Victoria(UGANDA)

Aquatic ecosystems around the world, lake, estuaries and coastal areas are increasingly impacted by anthropogenic pollutants through different sources such as agricultural, industrial and urban discharges, atmospheric deposition and terrestrial drainage. Lake Victoria is the second largest lake in the world and the largest tropical lake. Bordered by Tanzania, Uganda, and Kenya, it provides a livelihood for millions of Africans in the region. However, the lake is under threat from eutrophication, a huge decline in the number of native fish species caused by several factors including loss of biodiversity, over fishing and pollution has been recently documented. Increasing usage of pesticides and insecticides in the adjacent agricultural areas as well as mercury contamination from processing of gold ore on the southern shores are currently considered among the most emergent phenomena of chemical contamination in the lake. By the application of globally consistent and comprehensive geospatial data-sets based on remote sensing integrated with information on heavy metals accumulation and insecticides exposure in native and alien fish populations, the present study aims at assessing the environmental risk associated to the contamination of the Lake Victoria water body on fish health, land cover distribution, biodiversity and the agricultural area surrounding the lake. By the elaboration of Landsat 7 TM data of November 2002 and Landsat 7 TM 1986 we have calculated the agriculture area which borders the Lake Victoria bay, which is an upland plain. This process has greatly enhanced nutrient loading to the soil, which is subsequently transported to the lake by rain or as dry fall. All the data has been insert in the Geographical information System (ARCGIS) to be upgraded and consulted. Heavy metals in fish fillets showed concentrations rather low except for mercury being higher than others as already described in previous investigations. In the same tissue, cholinesterases activity (ChE) as an indicator of insecticides exposure showed significant differences among fish species in both activity and sensitivity of selected inhibitor insecticides. This integrated approach aims at identifying and quantifying selected aquatic environmental issues which integrated with monitoring techniques such as contaminant concentrations and biological responses to insecticides exposure in fish populations will provide a scientific basis for aquatic zones management and assist in policy formulations at the national and international levels.     

新疆番茄酱企业生产废水处理利用方式探析

近年来,新疆番茄酱加工业得到了迅速发展,目前番茄酱的产销量已占全国的90%以上。与此同时,新疆番茄酱生产企业的废水排放量也大幅增加,大量未经处理的废水直接排放,已对当地的水环境构成严重的污染隐患。本文分析了新疆番茄酱企业生产废水的排放特征与目前排放出路的可行性,并结合新疆的自然地理条件及番茄酱企业的分布情况,着重探讨了土地处理这一适合新疆的废水利用方式,以期有利于新疆的环境保护和废水资源的循环利用。     

生活垃圾渗滤液处理工艺探讨

分析了国内生活垃圾（以下简称垃圾）渗滤液的特点,探讨了一种比较科学的垃圾渗滤液处理工艺：沉淀-厌氧处理-MBR-纳滤处理,并且分析了各段工艺的原理、特点以及其作用。     

生活垃圾焚烧处理技术发展分析

综述了国内外的城市生活垃圾焚烧处理概况,探讨了生活垃圾焚烧处理与环境的关系,介绍了生活垃圾焚烧处理工艺,并对我国生活垃圾焚烧处理技术现状进行了分析。