特大型煤和瓦斯突出的地质条件及其成因

特大型煤和瓦斯突出危害极大，具有独特的发生条件，应专门研究。在全国９９ 次特大型煤和瓦斯突出详细研究的基础上，总结了特大型突出的一般特征及发生的地质和采矿条件，并给出了南桐矿区的几个临界值。对特大型突出地质条件的成因进行了较深入的探讨，提出了防止特大型突出的几点建议     

超高强度钻杆低温断裂性能及裂纹扩展特征研究

超高强度钻杆在冬季低温环境下容易发生脆性断裂事故,为了从断裂力学角度揭示其冷脆现象的本质,采用ZBC2302-D型示波冲击试验机,获得了不同温度下超高强度钢在冲击断裂过程中的力-位移曲线,并对比分析了冲击功、起裂功和裂纹扩展功之间的变化关系。采用国家标准GB 4161—2007中的计算公式,计算了冲击试样的裂纹扩展量Δa和阻抗应力强度因子K_R;同时,引入K_R阻力曲线,得到超高强度钻杆在不同温度下的剩余强度图。结果表明,当冲击试样开始出现裂纹时,随温度降低,钻杆的初始起裂应力有所增加,出现硬化现象。当钻杆出现一定长度的裂纹时,随温度降低,阻抗应力强度因子越来越小,而且降低速度越来越快,剩余强度也表现出相同的变化趋势。随温度降低,材料抵抗裂纹扩展的能力逐渐下降,表明钻杆在低温下更容易断裂。     

短波长X射线衍射技术及在环境工程中的应用展望

介绍了短波长特征X射线衍射无损检测分析原理和方法,无损地测定了预拉伸铝板、高强钢孔挤压件、铝合金搅拌摩擦焊接件等材料部件的内部残余应力、内部物相、内部织构及其分布,并分析讨论了测试结果。该仪器具有体积小,投资少、使用维护方便等优势,展望了该无损检测分析技术在装备环境工程中的应用前景。     

Application of CGP-cross route process for microstructure refinement and mechanical properties improvement in steel sheets

A modified method of severe plastic deformation (SPD) entitled constrained groove pressing-cross route (CGP-CR) was introduced for imposing a high magnitude of equivalent strain of about 2.32 per pass on the sheet form samples. The major benefit of this improved route compared to previous common route was the more homogeneity of strain in the rolling (RD) and transverse (TD) directions of sheets. In this study, low carbon steel samples were used for examination of evolutions in microstructure and mechanical properties during SPD via CGP-CR process. Mechanical properties improvement were measured by tensile and macro hardness tests. The results indicate that CGP-CR process can effectively improve tensile strength; and also, yield stress and hardness of as-received low carbon steel samples were improved up to about 100% after two deformation passes. Also, high magnitude of inhomogeneity can be observed in hardness distribution through first pass of the process which diminishes in the subsequent passes. Microstructural evolutions during process were monitored by optical microscopy observations and X-ray diffraction analysis. The results demonstrate that initial ferritic microstructure with grain size of about 30 μm was refined to a 225 nm cell structure after two passes of CGP-CR process.     

LD2铝合金腐蚀行为研究

LD2铝合金广泛应用于直升机结构中。铝合金构件在服役过程中会承受环境所造成的疲劳损伤,从而大大降低其服役寿命,因此必须要研究该材料的腐蚀行为。利用SEM扫描电镜,结合能谱分析对铝合金腐蚀损伤行为进行了高精度微尺度研究,并在疲劳断口上发现腐蚀坑底部的“隧道”,该腐蚀隧道会使腐蚀损伤评定过于保守,为结构寿命预测带来较大的不确定性。     

航空高强度LY12CZ铝合金腐蚀剩余强度预测

摘要：目的研究LY12CZ铝合金在腐蚀环境下的强度退化规律。方法按ASTM标准对常温下的LY12CZ铝合金进行预腐蚀,测量腐蚀坑的深度,统计腐蚀坑数目,进行数理统计,获得其几何尺寸的分布。利用MTS880试验机进行静拉伸试验。建立腐蚀坑的物理模型,基于腐蚀坑平均特征参数和最大特征参数,利用AFGROW软件进行剩余强度预测。结果剩余强度随着腐蚀损伤加深而逐步减小。结论与实验值对比的结果证明,该方法具有应用价值。     

我国建设内陆核电站对环境的影响

未来十年我国内陆核电将处在快速增长的阶段,本文以内陆核电站发电原理为基础,考察污染产生种类及成因,探讨我国内陆核电站在正常运营情况下可能对环境产生的影响,并思考发展方向。     

Biostability in distribution systems in one city in southern China：Characteristics, modeling and control strategy

This study investigated the bacterial regrowth in drinking water distribution systems receiving finished water from an advanced drinking water treatment plant in one city in southem China. Thirteen nodes in two water supply zones with different aged pipelines were selected to monitor water temperature, dissolved oxygen （DO）, chloramine residual, assimilable organic carbon （AOC）, and heterotrophic plate counts （HPC）. Regression and principal component analyses indicated that HPC had a strong correlation with chloramine residual. Based on Chick-Watson＇s Law and the Monod equation, biostability curves under different conditions were developed to achieve the goal of HPC 100 CFU/mL. The biostability curves could interpret the scenario under various AOC concentrations and predict the required chloramine residual concentration under the condition of high AOC level. The simulation was also carded out to predict the scenario with a stricter HPC goal （≤50 CFU/mL） and determine the required chloramine residual. The biological regrowth control strategy was assessed using biostability curve analysis. The results indicated that maintaining high chloramine residual concentration was the most practical way to achieve the goal of HPC ≤ 100 CFU/mL. Biostability curves could be a very useful tool for biostability control in distribution systems. This work could provide some new insights towards biostability control in real distribution systems.     

核电厂换料水池底部密封结构密封元件的性能分析

目的研究某核电厂换料水池底部密封结构中密封元件的性能。方法利用有限元分析软件ANSYS,采用超弹单元建立换料水池底部密封结构密封元件的二维轴对称模型,并运用接触单元模拟密封接触界面进行计算分析。结果经计算得到换料水池底部密封结构密封元件的预紧力-变形量曲线。结论计算结果为分析换料水池底部密封结构密封试验的泄漏原因提供了理论依据,同时也为工程中密封元件预紧力的确定提供了较有价值的参考。     

软弱结构面水流冲刷形成集中渗漏通道机制研究

软弱结构面塑性程度高、强度低,在地下水长期作用下,很易导致岩体产生变形、形成集中渗漏通道及渗透破坏.软弱结构面的渗透稳定性,一直是水利水电工程的重要工程地质及水文地质问题之一,目前对其渗透破坏机理的认识还存在不少尚未解决的问题.针对已有对基岩软弱结构形成集中渗漏通道研究的不足,本文在软弱结构面内讨论渗透变形问题,主要探...